max@ 4-4-4-8 is 521FSB @2.4v on 2:3 divider with P5W. DDR2-1100 was not successful even @ 5-5-5-15 thus far. I'm gonna grab another kit & see if it does better. Even still though, its better than my G.Skill & my other Ballistix's Model #: BL2KIT12864AA804.
well mine won't even boot at 400MHz in my DS3.... I am at 333MHz at 3-3-3-10 on my E6300...
My old OCZ Plat revision 1 that I just yanked out was running at 450MHz (3150GHz) no problem...
I am baffled to say the least... I guess the DS3 really does have wicked Micron D9 issues... Will have to wait for a bios update b/c Newegg has a 'limited' 30 day return policy.... ugh.
Quote:
Originally Posted by davidos
Crap that is not good news for me... I just ordered a set...
DAMN NEWEGG!!! They shipped it the same day I placed my order!?!
Mine are doing DDR 1010 @ 2.0v, memtest / prime stable ;)
so are these pretty much confirmed D9GMH??
I dont wanna pop the heatspreader immideately9 before I even use them) because of the warranty issue.
YesQuote:
Originally Posted by Senater_Cache
Sorry for the quick over-reaction post.... I changed the timings to 5-5-5-15 and it booted fine at 800MHz.... I went ahead and then jumped it up to 450MHz 1:1 and I am running 3150Mhz again as I type... albeit with those loose timings. Haven't tried further. There is supposed to be a new bios within a week to fix the Micron D9 issues.Quote:
Originally Posted by Seufar
My voltage was always 2.1v - 2.2v... My OCZ was 2.1v so I initially left it at that... I think that when you change your memory it might be best to 'Load optimized defaults' in bios instead of thinking that you can just pop them in and the DS3 will just adapt to the new memory... Granted, I never did load defaults but from the 7-8 restarts I did trying different speeds the DS3 eventually liked my 450MHz settings with the Crucial Anniversary...
I am happy and I know that this is SOLID memory that won't be my bottleneck. Don't be bummed, you bought great memory as the 4 pages in this thread can attest to.... Now I may just be tempted to switch to an Asus P5B-Deluxe like some of the people in this thread :p: but the DS3 is a great board and I really like it... and hopefully next week after the bios update I will be cranking up this memory to where it was meant to go!
I tell you what...Quote:
Originally Posted by davidos
You should be sorry for your over-reaction post!!! ;)
Since your post, I have bought an open box P5b Deluxe from newegg and sold my DS3. Totally not worth the time or the money if I could have got tehm working in my DS3... bah! another upgrade!?!
oh well...
So YOU got the open box P5B-Deluxe I was about to click 'buy now' at Newegg! :D j/kQuote:
Originally Posted by Seufar
I am over the 30 day period for my DS3 so I just have to wait on the bios update. :slobber:
LMAO :rotf:Quote:
Originally Posted by Seufar
Here is what I got:
http://www.newegg.com/Product/Produc...2E16813131028R
I was going to get a P5b-E, but I didn't want to be hindered by the 2.1v limit on the old revisions.
My set works pretty well with my DS3. Right now, i think whats holding back my OC is my chipset. I'm currently running stock heatsinks so it gets pretty hot. So far, i've been able to get 485mhz 4-4-4-12 @ 2.3v .. using F7 bios. Hope that helps somebody.
I got mine going at 400mhz @ 3-3-3-10 using 2.4v stable(prime 95 stable atleast. anyone have experience leaving at that voltage that high 24/7?
Can you please give me all of your settings??:toast:Quote:
Originally Posted by jondl
I plan on buying this ram in the future,hopefully i won't be disappointed.
just ordered mine. now don't know which mobo to pair it. sigh... another decision to be made.
P5B-Deluxe.... no contestQuote:
Originally Posted by Sanko
After two weeks of looking at this thread ... I finally broke down and got a pair. Should have them tommorow. Going straight into a Asus P5W-DH game rig after some some quick testing with a P5B. While I don't expect they'll beat my Team Group set, the price is just too good to pass on. Dang it. :rolleyes:
I knew you'd give in:DQuote:
Originally Posted by gundamit
Agreed!Quote:
Originally Posted by davidos
If you can wait another week or two the new boards for inte will be out. Its rumored they all run 550+ FSB. Most P5B's top out @ 510-520:rolleyes:Quote:
Originally Posted by Sanko
ya, i know that. but i don't think it comes cheap. currently still keeping my hand crossed. RD600/N680i. anyway, my pair should arrive in 2 weeks time. long way to go still. still had plenty of time gunning for mobo.Quote:
Originally Posted by The Nemesis
Even if your board doesn't have much voltage to give to these sticks they're decent performers. Set my voltage on my P5W to the lowest manual setting and started out at 400. 1.8v = Nice and cool. :D
http://img295.imageshack.us/img295/6224/lowvoltsae8.png
I orderd 2 sets of them and I have not had much of a chance to play with them but i pop-ed out my old set (1gb of ddr2 800) put the crucial sticks in and they are running at the same speed as the ddr2 sticks did with no adjustment
look here
Hey..if you give them a bit more voltage would you be able to raise the FSB or lower timings?Quote:
Originally Posted by gundamit