0901 Bios for P5WDH

sounds like RMA time NiCKE :(

can you test with other CPU or other mobo?

Quote:

---

Originally Posted by Big_Sam

Yes, I have B1 step 5.
Can't I really change multi with any version BIOS in BIOS?
If it is possible, with what version?
I never used CrystalCPUID, but I shall try.

Thanks.

---

E6700ES stepping5 seems not to be good at any version yet.
Naturally, E6700 or lower of stepping6 will not be able to be done.

Though X6800 can be changed all Stepping in BIOS.

Quote:

---

Originally Posted by Joe Camel

sounds like RMA time NiCKE :(

can you test with other CPU or other mobo?

---

I can change vcore with a Celeron, tried that before.

Quote:

---

Originally Posted by vmsein

Here is the link to the Asus ftp site where I found an older version of AFUDOS:
ftp://ftp.asus.com.tw/pub/ASUS/mb/flash/

I did use the syntax you have above to flash just to be safe;)

---

thx

ftp://ftp.asus.com.tw/pub/ASUS/mb/flash/AFUDOS207.zip is right?

Quote:

---

Originally Posted by m0da

same problem here. its strange that it shows 252mhz fsb. it does the same for me.

Also it takes a lotttt of time to post because of the microcode update. it gives some error about the uCode and says hit F1 to resume so I do.
you know how normally the lights on your keyboard flash up then your system posts? well mine flashes 3 times (or i hear that sound 3 times... something like that) before the system posts forreal.

---

you need to go in and re save your bios at that point so you don't get that resume message anymore.

Quote:

---

Originally Posted by Big_Sam

I have E6700ES with multiplier x6-x10, but I do not know how it to change.
I constantly have x10 and the option of change multiplier in BIOS is inaccessible.
I tried 078 and 0701 in both is identical.
How is it possible to change multiplier?

---

same b1 step 5 e6700es here, and I have not been able to change multi in any bios yet - 502,602,077,078,088,701.........

For me this BIOS is no better (or worse) than 0701 - keeps for me.

Mav

NICKE - You cannot to change Vcore with some ES B0 Conroes ... only with very old BIOS, but not in newer, this function is blocked by Asus. My Conroe B1 and B2 works great...

P.S. This is not BETA BIOS but poor Alpha version, dont bother to flash it , wait for official 801 ...

Nicke,,

mine did this for a while but worked ok with the 0701 bios.

do you have C1 off and EIST off ? if not then TURN IT OFF!!

Quote:

---

Originally Posted by OBR

P.S. This is not BETA BIOS but poor Alpha version, dont bother to flash it , wait for official 801 ...

---

What is your statement based on?

Quote:

---

Originally Posted by Lestat

Nicke,,

mine did this for a while but worked ok with the 0701 bios.

do you have C1 off and EIST off ? if not then TURN IT OFF!!

---

What are these and what do they do?

Where will I find the BIOS settings to do this?


Cheers

Mav

you will find them under the CPU configuration, where you change the cpu multiplier and such.

they make the cpu throttle to a lower clock rate and lower the voltages.

i did notice on one of the older bios's if you had those two things on the cpu voltages would only do auto.

I got a E6600 Stepping 5 B1, and I got everything except Microcode update disable in CPU Configuration. Just a question here, is the 1:2 multi working as it should on this board? Tried with 4:5 or something to get 512mhz 4-4-4 stable but couldn't, now I changed to 1:2 and running 32M 534mhz 4-4-4 at lower volt. Really odd.

Quote:

---

Originally Posted by NiCKE^

Just a question here, is the 1:2 multi working as it should on this board?

---

Seems to be for me as cpuz reports the memory is @ 1:2 in windows.

OMEGA3, cronic many thanks :)

CrystalCPUID helps me :)

http://img459.imageshack.us/img459/685/fsb440dl0.gif

Quote:

---

Originally Posted by xgman

What is your statement based on?

---

I NOW IT! !

here is 801 ... ftp://dlsvr01.asus.com/pub/ASUS/mb/s...e/P5WDH801.zip