Another New + Entry level of Micron D9 from GSKILL

today i received the new rev:

0606... :D

http://mwirths.de/pics/gskill/gskill606_1_1.jpg
http://mwirths.de/pics/gskill/gskill606_2_1.jpg

4 GB: :banana:
http://mwirths.de/pics/gskill/gskill606_3_1.jpg

new 0606 chip:
http://mwirths.de/pics/gskill/gskill606_4_1.jpg

old 0603 Chip:
http://mwirths.de/pics/gskill/gskill606_5_1.jpg

These chips looks like the small versions, D9DXX or D9GXX.

Anyawy, have you tried clocking them ? Hopefully they perform well also.

small versions?

explain for me please

Quote:

---

Originally Posted by webwilli

small versions?

explain for me please

---

I tot the rams used Micron's D9DQT/D9DQW ICs which were fat, just like DDR1 ram ICs. But these are more like typical DDR2 ram ICs, smaller and square shaped. The should be other D9GXX or D9DXX revisions. Don't clock as well but are still very good stuff. =D

hmm.....wonder whats different between 0605 and 0606.

[QUOTE=farksyDon't clock as well but are still very good stuff. =D[/QUOTE]
could you be a little more specific?
i was gonna trade my 2x1gb Mushkin Xtreme Performance PC6400
for a pair of these 0605's...
and now you got me thinking ...

Quote:

---

Originally Posted by ludeboy12

hmm.....wonder whats different between 0605 and 0606.

---

same IC :)

Quote:

---

Originally Posted by Cooper

Does anyone have ZX series ?

G.S Technician
perhaps you might show us some results from that kit - it`s cheaper, but speed/timings are the same. How far can those go ?

---

if you want to OC it..... you can't!!!
it is good DDR2 800 value ram for intel
but... just not for overclock!

Thanks for your honesty.
So you mean those aren`t the same ICs as HZ (haven`t heard of D9 that can`t OC) and looks like not Elpida either. Perhaps there`s chances to lower latencies within 800 MHz.
You mind posting little review ? :)

the 0606 seems to be ok.

not 4-4-3-1 @ 500, but 4-4-4-1 @ 500 with 2.2 Volt. benchstable (2 x SuperPI + dualPrime + PCMark2004 at the same time).

Quote:

---

Originally Posted by webwilli

the 0606 seems to be ok.

not 4-4-3-1 @ 500, but 4-4-4-1 @ 500 with 2.2 Volt. benchstable (2 x SuperPI + dualPrime + PCMark2004 at the same time).

---

Tighten the timings and give them some more juice ;). Damn I wanna get my board and join the fun :D

if i order these sticks from newegg: http://www.newegg.com/Product/Produc...82E16820231065
can i be sure that are d9 fatbody IC?
because i'm from italy and a friend of mine take it for me...i can't rma it:p:

you can be sure they are NOT fatbody D9, as the fatbodies aren't made anymore...

Nice, my 2GB is still at oc-wear, i have waited nearly 2 weeks and i havent heard nothing about them, looks like i lost 280,90e :confused:

Quote:

---

Originally Posted by paakkis

Nice, my 2GB is still at oc-wear, i have waited nearly 2 weeks and i havent heard nothing about them, looks like i lost 280,90e :confused:

---

Did you order at OC-Wear in Germany? B/c they are really nice guys and I can't believe that you lost your money. Give them a call ;).

Yep OC-Wear in Germany, yes maybe i should give them a call B/c they dont reply my e-mails.

Quote:

---

Originally Posted by PowerToTheUsers

you can be sure they are NOT fatbody D9, as the fatbodies aren't made anymore...

---

ehm sorry the disguise
can i be sure that is the chip mentioned in the thread? the micron D9XXXX?

Nice mem's !! :D

Can some one please tell me for sure if this babes can hit 1066MHz @ CAS 4 on a P5WD2 Premium with a max vdim of 2.3v ?!

Thanks.

good RAM ! nice result!

but why the SPD shows only to 800MHZ??

REGARDS.

Quote:

---

Originally Posted by IcEMaN666

ehm sorry the disguise
can i be sure that is the chip mentioned in the thread? the micron D9XXXX?

---

dude there have been a couple of us that have got these chips from newegg now so im sure you'll get them....

Quote:

---

Originally Posted by Xtreem Tech

good RAM ! nice result!

but why the SPD shows only to 800MHZ??

REGARDS.

---

Since it's only PC2-800 memory, the SPD is only programmed for 800MHz.

Can some one please tell me for sure if this SN: 0605xxxxx babes can hit 1066MHz @ CAS 4 on a P5WD2 Premium with a max vdim of 2.3v ?!

And any feed back about the 0606 ones ?

I cant get both of them ... need to decide :(

Hey guys, again! :)

I just wanted to drop by and show you my more/less final results before I get some help figuring out a vdimm mod this board. I want to see what 2.7v can do to those DIMMs :)

ASUS M2N-SLI Deluxe (nForce570 SLI), BIOS 0303
AMD AM2 Athlon 3200+ "Orleans"
Arctic Cooling Freezer 64 Pro
EVGA 7800GT KO 256MB @ 430/1390
G.Skill F2-6400PHU2-2GBHZ "0605", Micron D9XXX


MAX fully stable DDR2 8-4-4-4.0 clocks reached so far ---> DDR2-1120 @ 2.5v
Single EVGA 7800GTX KO @ 490+40/1390, ForceWare 84.21, Modified driver settings (High Performance)

SPi32M -------------------------------------------------- SP32M - Drive Strengths window

http://www.clockmehigh.com/cooler/sc..._32M_1_4x3.jpg http://www.clockmehigh.com/cooler/sc..._32M_2_4x3.jpg

SP2004 LargeFFT 2hrs ----------------------------------- SP2004 LargeFFT 2hrs - Drive Strengths window

http://www.clockmehigh.com/cooler/sc...2004_1_4x3.jpg http://www.clockmehigh.com/cooler/sc...2004_2_4x3.jpg

3DMark2001 & 3DMark03 -------------------------------- 3DMark2001 & 3DMark03 - Drive Strengths window

http://www.clockmehigh.com/cooler/sc...DM03_1_4x3.jpg http://www.clockmehigh.com/cooler/sc...DM03_2_4x3.jpg

3DMark06 ----------------------------------------------- 3DMark06 - Drive Strengths window

http://www.clockmehigh.com/cooler/sc...DM06_1_4x3.jpg http://www.clockmehigh.com/cooler/sc...DM06_2_4x3.jpg

Not bad, eh :D

Nice Bachus :D Have you tried tightening the TRC to 12 or can those rams not run it?

The pair I got from newegg on monday were 0605 so I think its safe to assume they all will be.