Tempted to get a A64 now. :)
Printable View
Tempted to get a A64 now. :)
here is my a64 not 100% stable
no v-mods
after 1 ou 2h of seti runing my prometeia shows -46c and mbm shows -10º :eek: maybe i'v a poor contact
http://ricky.home.sapo.pt/a64/2600.JPG
going to v-mod the board 2.7ghz will be great :D
whats your superpi?1MQuote:
Originally posted by |RickY|
here is my a64 not 100% stable
no v-mods
after 1 ou 2h of seti runing my prometeia shows -46c and mbm shows -10º :eek: maybe i'v a poor contact
http://ricky.home.sapo.pt/a64/2600.JPG
going to v-mod the board 2.7ghz will be great :D
19894.
http://service.futuremark.com/compare?2k1=7180706
maybe i'll still crack 20k with this rig. unfortunately i lost 7fsb somewhere which leaves me with a really pathetic overclock.
made #17 for 9500np by bumping RiNg$KiN to #18 in 1project 1 user. front page finally.
looking for an nforce3 board, later stepping athlon64 and better graphics card memory.
not sure but its somthing like... humm 35s ~ 36s i just run superpi to test stabilityQuote:
Originally posted by koensa
whats your superpi?1M
cumps
The Super PI seems too low for me at this Speed....
See mine ......
nothing optimized just testing cpu dont remember ddr timings and other bios options, but they are relaxed i think
i made the mods on the board,
cpu:
ht600, mems very relaxed @ 266mhz, tnt2m64 to handle more agp
255 stable @ 1.6v
260 stable @1.65v
260 stable @1.75v
260 stable @ 1.9v errrrrr
at 265 1.9v crashes on the end of superpi
tryed 265x9.5 and run fine superpi
try 270x9.5 and §§§§s my main partition :(
very strange isn't suposted to have a better gain with more voltage?
maybe i'v some luck on 9.5x265 run... and its the board limit or pci limit...at more than 265
need an nf3 board... but i'm apreensive... i want more than 2.6ghz :S
cumps to ppl
sound like the cpu is too hot. what board is that?
asus k8v dlx
my promy shows -48º and cpu shows -12º @ 2.5ghz 1.6vcore and seti full load after 2 ou 3h
carefull of the resistors when you remove the ihs :D
what do you mean qwerty? leave it on or take it off? any difference?
on p4 at air the gain is 2 ou 3ºc without hs, but the risk is very high... i'v seen 2 ou 3 cpu's going to hell...
anyway its normal to don't gain anything from 1.6 to 1.9v? i wish the problem is the board... i'm waiting for a gigabyte :D
tankyou ppl :toast:
Nothing to brag about compared to you guys but in an effort to add one more CPU to the mix.
AMD64-3200 @ 2.25ghz on stock cooling.
I have a feeling this CPU has a lot more in it but my Ram blows and cant even run 1:1 at this. I think the timings cause problems because at even 2.26 the system will hard lock in any 3D App.
Warden
welcome Warden if you havn't been welcomed already.
have you tried to lower your ldt setting in the bios to 2.5x system clock or even 2x system clock. remember your cpu's codes?
CPU Codes are:
CAAKC 0334TPMW
If you need more info then that just let me know. I did have to lower the LDT to 2.5 in order to even get a 5mhz overclock. The system will boot at 230 FSB and I managed get it to run at 240 FSB with Easy Tune for a bit but I think my Ram and possibly stock cooling solution is screwing me up.
Warden
is it only me that ever got a brown chip "F4" in 3rd code line?? damn, that chip could do 10x240 on air at only 1.55V:eek:
week 35 FX-51, 1.92V
very nice charlie. are you from the brute force school of computing? :p
damm charlie...you are smoking right now.....
good going...you lucky dog...i love ther mulipler option you have...
my pci crap's out at 2.83 so 2800 is my tops and i still will corrut the hard drive.
but i have some new ram coming....hopfull i can run 1:1 around 280fsb...i will see:D
It's a mixed blessing, Bowman. I really wish I could run 11 x 280 1:1, lol. With 600 LDT (3x) you're limited to about 234ish, at LDT400 (2.5x) I've done 256 using 5:4 divider, fortunately the DC architecture makes up for the lack of fsb with massive b/w. AFter all they say the A64 IS an FX minus the DC controller and minus the unclocked multi's. But the key to all this benching fun is you guys' vid cards...I have arguably the most powerful CPU on the ORB but can't break the top 5 at 533/439. I really need some better GPU cooling. BTW, OT do you know what kind of evap temp a r404 prommy maintains on a 9800Pro? Trying to compare it to the temps of my DI rig...
thanks
C
C
"What doesn't kill us makes us stronger"Quote:
Originally posted by flytek
very nice charlie. are you from the brute force school of computing? :p
right?
C
well i maintain a evap temp of -45c to -43c loaded on the gpu.Quote:
Originally posted by charlie
It's a mixed blessing, Bowman. I really wish I could run 11 x 280 1:1, lol. With 600 LDT (3x) you're limited to about 234ish, at LDT400 (2.5x) I've done 256 using 5:4 divider, fortunately the DC architecture makes up for the lack of fsb with massive b/w. AFter all they say the A64 IS an FX minus the DC controller and minus the unclocked multi's. But the key to all this benching fun is you guys' vid cards...I have arguably the most powerful CPU on the ORB but can't break the top 5 at 533/439. I really need some better GPU cooling. BTW, OT do you know what kind of evap temp a r404 prommy maintains on a 9800Pro? Trying to compare it to the temps of my DI rig...
thanks
C
C
i have mine running ldt 2.5 @280fsb 5:4 2,2,2,6 so i dont have the bandwith i need....1:1 @280 fsb i can hit 4300+ on sandra mem test but on 5:4 i hit only 3500+
Not mine but it's the new record :)
From Piopioshardware.com
http://202.133.242.100/indexpic/2003news/3300.gif http://202.133.242.100/indexpic/2003news/SK8N_LN2.jpg
Hardness hardness ability appearance non- Hisashi AMD Athlon 64 FX-51 place reason vessel engaging in possession new description? Mark? Raw, electricity with respect to Japanese utilization LN2 cold ™È adding šØ mark remodelling bundle Athlon 64 FX-51 super •p reaching 3300Mhz, simultaneous bundle high Œœ ›ß Hisashi Super Pi 1m,8m,32m description? Simultaneous renovation and watching ˜Ò young at the time of the right AMD talent bundle pulse stopping sho not yet ˜Ò right yes from here period permission and the Read More!
yep you right....problem is finding fast memory the board likes...the mushkin wont run as fast as the ocz or hyperx i have.seams the boards are really picky anymore.good thing i have like 8 pairs of fast memory setting here to play with.and i will tell a little something...i have some pc4300 CL 2.5 memory on the way...fastest out.o so it looks like...Quote:
Originally posted by MickeyMouse
yeah bowman thing is you'll gain a few points in 1:1 at 280 but your going to have to drop your LDT down to 2x or 1x to run that fast in 3d.. the only test that will suffer is drag low.. oyur at 509fps now I bet ya loose 15-20fps ruight there :( but lobby ajd car high should benifit from the faster bandwith big time :)
i havent said a word about it yet and i see no one has spotted it yet being available...i wanted to get mine on the way before i opened my mouth..LOL..
anyways the adata i had ran 280 1:1 and would sandra 4300+ killer score for a a64,but the memory crashes so much it is unusable.so i am hopping pc4300 CL2.5 may do what i need...