Printable View
Does anybody happen to know if GPGPU is supported by WCG? I've got an 8800GTX in one box with CUDA support and 2xHD5770 CFX in another box with OpenCL support. At any rate, I'm in with a 3.8GHz i5-750, a 3.0GHz Q6600, and (if I get it working again in time) a 3.0GHz E4500.
Edit: I just realized this was my first post after 2 years of lurking.
This is to demonstrate how much computing power there is at XS. Of course, you are welcome to keep crunching after one week.Quote:
Originally Posted by Fixt00l
Some of the participants in WCG are universities and other institutions that use supercomputers. We want to show that we have as much computing power here as they do. We can create a "super virtual computer" by having all the PC's (and Macs:)) here working in concert to perform very large tasks. This is the power of grid or distributed computing.
Is it possible to run this program throught some remote access over internet? Something like team viewer. So that I can even from rebooted or shut down state bring computer to OS?(that does not depend on ip address). I'm studying in another country and workstation computer is sitting at home and collecting dust and rust. :-). So, I really want to contribute. Any tutorial will help for setting this up (remote access, not WCG or BOINC). I don't like to explain to parents what-how to do because they can only unplug from city power grid. Thanks Movieman for email!!! :up:
I'm in!
One question though:
Why is BOINC still shows up in Task Manager as 32bit process even after I've installed 64bit client version 6.10.43?
I will try and add few more cores from my work computers later on this week, so all in all I should contribute around 10-20 cores @2.5GHz on average.
That's because BOINC itself is a 32-bit application. A 64-bit client is available for CPUs with x64 computing capabilities. In theory, it shouldn't make a difference whether you use the 32-bit or 64-bit client. But the reality is that the 64-bit client will generate more points per day.Quote:
Originally Posted by Lightman
Downloaded, and will be crunching tonight, and hopefully overclocked tomorrow.. and as long as I can :)Quote:
Originally Posted by sierra_bound
EDIT: One more question, if I'm running same client with same user on several computers, do I need to setup anything extra, or do I just login with same username in them all, and they're smart enough to know not to interfere with each other? I've seen some profiles and devices mentioned, so just checking.. easier here than reading the same WCG site :)
LOL! Just had to include a reply to you as well.. I'm not sure if I should say "welcome" for coming in or "good morning" for waking up :D Anyway, as much as I've seeen in earlier posts - no GPGPU client for now unfortunately :(Quote:
Originally Posted by Tristor
Just install to each machine using the same name and password that you used on the first machine and your golden.Quote:
Originally Posted by LuxZg
Yes, unfortunately no GPU app yet but we're working on it.
Joined... Movieman, I told you about two years ago that I'd join...
well I did today :-)
... now I gota install this baby on everything! (seriously I can contribute at least 3 computers to this project.)
Cheers!
Everyone seems to double post today ;)
@Movieman - thanks for the invite, and the info.. I'll do my best to install several on computers in my office as well, they can at least crunch 16 hours a day Mon-Fri, and through whole weekends, that's got to count for something, even if it's lowly E2xxx's :) Maybe even a Q6600 part-timer, and of course, I'll add my desktop at home in a few minutes as well (nothing fancy, but it should help). Nice idea though, hopefully it catches on ;) With Xtreme population, it's obvious it's a lot of power sitting idle most of the time.. specially since many have multiple computers lying around.. Catch ya later!
I'll answer the call to Movieman-week with my single i7 920.
ok im hoping im doing this right but im having ago
to be honest im not sure what i have got myself into lol
becuse i didnot know what the hell its about can someone just give me a quick
(what its doing)
thanks
just to ask everyone is running my i7 920@3.7ghz wile running world community grid and a temp of 64c will this be ok for long running times
thanks
ps i have been crunching for 1hr now but more to come :)
64C seems OK. Is that at full load?
it peaks to 100% but its not mak for all the time
It's ok, I tend to think of 69-70 where I get concernedQuote:
Originally Posted by rubber5
also this may help if your not seeing 100% usage, go into boinc manager then to 'MY grid" and to device profiles and check the settings.
These will work fine:
if everything goes as planned... ill throw down for a week... possibly even longer...
WCG has always sprung my curiosity, but ive never had the time to really read into it... maybe this is that time.
How long does it take before my crunching shows in the stats?
ok thanks for that im a bit happyer now knowing my temp is ok
i just know my cpu fan gets faster as the temp goes up but i has not gone any higher than 64c (yet) lol
as i have seen its after 12 hours or somethingQuote:
Originally Posted by Mydog
If you started today you probably won't see any results until tomorrow. By the second day, you'll get a better idea of your daily point average. Each completed work unit that's sent back to WCG has to be validated. The same work unit is usually sent out to at least one other host (computer). The servers then compare the two results. Scientists are big on redundancy.:)Quote:
Originally Posted by Mydog
Thanks guys for helping here.
It does tend to take a few days to show what your really doing as it comes "up to speed"..
This is a patience thing so "set it and forget it .
Then check back Friday and be surprised.
how does it tell you on the work the pc has done ie g-flopps or total calculations if you know what i meen
Don't let him fool ya... he's cautious. I've been running my i7 at high 80's for almost a full year now, nothing to worry about. :up:Quote:
Originally Posted by Movieman
Just depends where you're comfort level is.
cool thanks for giving that info as well i love the cpu now its a total monster :)lolQuote:
Originally Posted by Otis11
and its even better @3.7ghz :) lol
I'm not really sure what you mean, but you can check on work unit progress using the Boinc Manager. If you want to see your total work history go to the WCG site and play around with the Results Status part of the My Grid page.Quote:
Originally Posted by rubber5