MSI Special BIOS for for AMD 3 core to 4 core

Printable View

Show 100 post(s) from this thread on one page

07-18-2009, 08:53 AM
Toppc

Gskill super low voltage DDR3-1600 C9

http://www.coolaler.com.tw/toppc/SLVD316/SLV1.JPG

http://www.coolaler.com.tw/toppc/SLVD316/SLV2.JPG

IN 790FX-GD70 BIOS VER:1.51
AMD X3 720 => 4 CORE
MEMORY 1.25V

http://www.coolaler.com.tw/toppc/SLVD316/AMD.PNG
07-18-2009, 08:56 AM
Toppc

Quote:

Originally Posted by Oliverda

Toppc

Thank you for the new BETA. http://prohardver.hu/dl/s/rl.gif

Unfortunately I have some issues with it.

1. It automatically sets the HT to 1600MHz and when I set it manually to 2000MHz then sometimes my system can't boot up (FF on post code disp.). :shrug:

2. When I try to set the NB multiplier from 10x (auto) up to 11x or 12x (etc.) the systems can't start at all, while I can simply clock it up to even 2600MHz with raising the FSB. So I think that the problem is not in my CPU.

Please advise. Thank you.

some one cpu if 3>4 or 2>4 can;t run high HT or NB
you can UP CPU-NB & HT voltage try again
07-18-2009, 10:40 AM
Bredband71

I have Vista 64bit and i can lock up my 550BE to B50 X4, but just before when it´s time to loggin in Windows my computer restart. Why??
I have try to raise CPU, CPU-NB and HT volt, but it will not work.
In Windows XP 32bit it´s work fine but it not stabe yet.

This is my computer:
MSI DKA790GX Platinum / AMD PhenomII X2 550BE 3.1Ghz 1.28v @ 3.6Ghz 1.28v /stepping CACYC AC 0920GPMW / Thermalright Ultra-120 eXtreme, Noctua NF-P12 Fan / 2x2048 A-Data Vitesta Extreme Edition PC8500 1066Mhz+ 5-5-5-15 2T (2.1v) / Corsair HX520W

// Tommy
07-19-2009, 02:57 AM
brigs

Quote:

Originally Posted by Bredband71

I have Vista 64bit and i can lock up my 550BE to B50 X4, but just before when it´s time to loggin in Windows my computer restart. Why??
I have try to raise CPU, CPU-NB and HT volt, but it will not work.
In Windows XP 32bit it´s work fine but it not stabe yet.

Maybe you got defect CPU, i mean unlockable but not 100% stable in windows, try lowering HT, CPU-NB or CPU multi maybe it can help. Vista 64bit is more sensitive than 32bit windows for error faulties. ;)
07-19-2009, 04:33 AM
beta

Quote:

Originally Posted by Toppc

some one cpu if 3>4 or 2>4 can;t run high HT or NB
you can UP CPU-NB & HT voltage try again

toppc, yesterday prime was running fine with nb/ht@2400/2400. today with the same settings I cant even get it to post (FF), I must set nb/ht to auto to make it work.

many people are having the same issue... are you sure this is not bios related?
07-19-2009, 05:29 AM
Shrekogre

any bios for the MSI DKA 790GX PLATINUM?
07-19-2009, 07:05 AM
lemonlime

I've got the same FF post code error. Seems to happen when I shut down the system and then try to boot up again. I've only been able to resolve it by clearing the CMOS and then setting ACC etc in the BIOS again. Hopefully this is just a bug that will be resolved in the next BIOS revision.
07-19-2009, 09:16 AM
Entropicity

Quote:

Originally Posted by lemonlime

I've got the same FF post code error. Seems to happen when I shut down the system and then try to boot up again. I've only been able to resolve it by clearing the CMOS and then setting ACC etc in the BIOS again. Hopefully this is just a bug that will be resolved in the next BIOS revision.

Leave HT at 1600 and NB at 2000. Should fix the issue. This seems to be a new issue in 1.51 for unlocked processors. However, I'd gladly take my unlocked overclocked cores over HT overclocking :D
07-19-2009, 10:18 AM
Bredband71

Quote:

Originally Posted by brigs

Maybe you got defect CPU, i mean unlockable but not 100% stable in windows, try lowering HT, CPU-NB or CPU multi maybe it can help. Vista 64bit is more sensitive than 32bit windows for error faulties. ;)

Okay, thanks. I will try to lowering HT, CPU-NB or CPU multi
Or i will try MSI DKA790GX beta bios v.184 if it works better.
07-19-2009, 09:10 PM
brigs

Quote:

Originally Posted by lemonlime

I've got the same FF post code error. Seems to happen when I shut down the system and then try to boot up again. I've only been able to resolve it by clearing the CMOS and then setting ACC etc in the BIOS again. Hopefully this is just a bug that will be resolved in the next BIOS revision.

yes i found too but you can try keep HT multi at x8 (2000) while you push FSB to 250. At this config isues "FF" code hang at boot is gone.

http://i202.photobucket.com/albums/a..._3750_1066.jpg
07-20-2009, 03:37 AM
mav2000

Ok will try this.....lets see how it goes.
07-20-2009, 08:58 AM
lemonlime

Quote:

Originally Posted by Entropicity

Leave HT at 1600 and NB at 2000. Should fix the issue. This seems to be a new issue in 1.51 for unlocked processors. However, I'd gladly take my unlocked overclocked cores over HT overclocking :D

I would definitely agree with you there! Thanks for the tip. I'll give it a shot tonight. :up:
07-20-2009, 09:37 AM
mav2000

Well...for some reason my ram wont clock to specs...no reply from OCZ either....baaaah...no idea what to do..
07-20-2009, 05:48 PM
hsn

The Bios is Rock. Thanks. :up:
Its unlock my X3 710. Thaks again.
07-20-2009, 06:50 PM
Entropicity

Quote:

Originally Posted by mav2000

Well...for some reason my ram wont clock to specs...no reply from OCZ either....baaaah...no idea what to do..

When you do your ram settings. Enable "Both" (as opposed as AUTO, DCT1 or DCT0) and set the timings X-X-X-XX for both as listed on screen.

Not sure if this is the issue you are facing. But this should let you see the configured timings correct in CPUZ.
07-21-2009, 04:19 AM
lemonlime

Quote:

Originally Posted by mav2000

Well...for some reason my ram wont clock to specs...no reply from OCZ either....baaaah...no idea what to do..

A lot of Phenom II processors won't run DDR3-1600 speeds, although they will run lower speeds with very tight timings. It may not be the board/RAM, but rather the integrated memory controller holding you back. I can't seem to get my OCZ low voltage kit to run at 1600MHz regardless of the timings, but it'll run 1333MHz at 5-5-6-24. The only thing that may help is to give a large boost to the CPU-NB voltage.
07-21-2009, 05:19 AM
mav2000

Tried that upto NB of 1.35 but no go...I guess I will just have to live with this. ARe u using the amd platinum ocz kit. if so can u share your timings??
07-21-2009, 05:35 AM
hsn

This is my X3 710
http://img216.imageshack.us/img216/8667/ibtx410.jpg
07-21-2009, 08:41 PM
Bioshock

i always get the FF code on the LED if i enable acc on my 720be

i know it unlocks though ive done it on a gigabyte board, any suggestions on getting the 790fx-gd70 to post with acc enabled?
07-24-2009, 06:16 AM
Toppc

UP 7/24
FIX CAN'T OPEN HT2000MHz

790FX-GD70 V 1.52
790GX-P V1.92
770-C35/C45 V1.42
07-24-2009, 07:26 AM
beta

thanks Toppc, i'm gonna try this asap
07-24-2009, 08:48 AM
Toppc

TEST IN 790FX-GD70 NEW BIOS

http://www.coolaler.com.tw/toppc/MS7550/7577.PNG

http://www.coolaler.com.tw/toppc/MS7550/75772.PNG

TEST IN 790GX-P

http://www.coolaler.com.tw/toppc/MS7550/7550.PNG

THIS ONE IS CPU-NB UP TO 1.45V

http://www.coolaler.com.tw/toppc/MS7550/75502.PNG
07-24-2009, 11:31 AM
beta

ht/nb @ 10x:
http://img141.imageshack.us/img141/4407/72248053.jpg

auto settings seem to work well (if i can say that after 15 min) with the default 10x ht multiplier

http://valid.canardpc.com/cache/screenshot/616442.png
07-24-2009, 12:06 PM
Konjurer

Hi, Toppc, any good news for 790GX-G65 yet? Thanks
07-25-2009, 12:01 AM
Toppc

Quote:

Originally Posted by beta

ht/nb @ 10x:
http://img141.imageshack.us/img141/4407/72248053.jpg

auto settings seem to work well (if i can say that after 15 min) with the default 10x ht multiplier

http://valid.canardpc.com/cache/screenshot/616442.png

http://www.youtube.com/watch?v=ocATycfrRnQ

:shrug:

Show 100 post(s) from this thread on one page

All times are GMT -8. The time now is 07:30 AM.

XtremeSystems