Printable View
Sure thing...
1377969
I just did a quick run no tweaks or anything, all I changed in BIOS was:
FSB Frequency to 285
LDT/FSB Ratio to x3
CPU VID Special Control to 114.4%
5/6 RAM Divider
http://www.zen11765.zen.co.uk/Pictures/3135.gif
This is my first AMD64 rig so I'm still learning... any tips would be gratefully recieved! ;)
So far i have knowlwdge of 7 several Wafercahrge IDs
1376099
1377569
1377677
1377767
1377777
1377789
1377969
Tyranus and whats about Prime 95 Vers. 24.14 Custom FFTs in place?
Is your Chip Primestable?
Could you please reply to my question? :D (page 12)Quote:
Originally Posted by Rufus7
Quote:
Originally Posted by Tyranus
you have mixed up trp with tras. Its okay since its yyour first time, looked funny to me on the dfi nf3 as well. but you may want to change that around in bios soon.
nice one, but seems you messed your mem's timmings.Quote:
Originally Posted by Tyranus
try to switch your Ras# precharge with your Tras ;)
Who is that chip Prime stable?Quote:
Originally Posted by Tyranus
Only 1M stable.lol
Yeh that was what the BIOS defaulted to and I never paid much attention at first, then I noticed it last night and promptly changed it, I've messed around with the timings in the BIOS and everything seems fine now!Quote:
Originally Posted by GMX
I didn't bother with Prime cos it was just a quicky, didn't have time to properly go through everything!
I'm gonna have a play at the weekend so hopefully you can have some "proper" results and I can see what she's got in her!
Another KAB3E 0547GPMW..
http://213.202.211.105/gravedigga/05...263mhz_BH5.jpg
very nice Funkflix! Can you do 3.2GHz with 1.55V/1.58V prime stable?
Not tried yet, get a error after 30min with 3200MHz 1,53V, i will try more tomorrow. :)
http://213.202.211.105/gravedigga/0547gpmw/prime0ne.jpg
I have a Stepping very seemed to your one:
ADA3700DAASBN
KAB3E 0548CPMW
1376599KSO191
What happens is that I do not have a good refrigeration, and only I have managed to put it to 2915Mhz (265x11), stable to 1.425V, With what I believe that this well.
I imagine that with this stepping and a good refrigeration, would be the good some Mhz.
Bye!!
KAB7E 0547GPAW 50023 room temp ~ 24°C, water ~ 27°C
http://people.freenet.de/destro/SD%2...0%201,328v.jpg
SuperPI 1m= 3400mhz
KAB3E 0547GPMW 50090
prime 3ghz @ ~1,344v
superpi 1m = 3420mhz :devil:
http://people.freenet.de/destro/superpi/24.140sek.jpg
What sort of cooling are you guys using as I am struggling to get my 3700 to more than 2.4GHz :( .
Most user here are with watercooling i think. :)
What stepping is ur 3700+?
Seems to need a bit more vcore than most of the others on here but I'm happy so far!
http://www.zen11765.zen.co.uk/Pictures/3003Thumb.gif
Is 2-3 hours Prime ok?
Max temp was 38c... what do you reckon the max vcore I should go to? Any other tips would be great!
It's a 'CABGE'. Even I had to laugh at that when I read it! Never seen anyone else with one of these. Would CPU Thermal Throttling hold back my OC?Quote:
Originally Posted by funkflix
Quote:
Originally Posted by -De$troyeR-
Thats a very strong chip there:slobber:
just curious... are you guys buying these chips from normal etailers like newegg or zzf or from local shops?
Yup mine was from a normal etailer!
THX ;)Quote:
Originally Posted by SIOUX
http://people.freenet.de/destro/SD%2...2ghz1.488v.jpg
great chip m8.Quote:
Originally Posted by -De$troyeR-
now u'll have to get some dice to test if this baby can do 3.7g or even more :D
Lol......now his chip IS good, but its not gonna be good enough to overcome its cold-bug :p:Quote:
Originally Posted by Raiden Zero
uhm, forgot about those damn coldbugs ^^Quote:
Originally Posted by s7e9h3n
I have a new OC with my 3700 + Sandy to 3000Mhz in the superPI 1M obtaining 28.454 seconds and a refrigeration for air with a XP-90c whit the stepp KAB3E 0548:
http://img88.imageshack.us/img88/121...hz300x1.th.jpg
I believe that it is a good score bearing in mind that takes refrigeration for air....
goodBye!
Wenn you could adjust the ramtimings a little tighter, you could get a better score. Try cas2.5-4-3-6;)Quote:
Originally Posted by Jackarturo
Ohh thanks, Or, that putting these latencies, get better times, or major stability?Quote:
Originally Posted by BvK
Anyhow, it he will try it, thank you very much.
Goodbye
Another question ... this stepping:
KAB3E 0548CPMW
1376599k50191
would be of the same thing raises more or less that that of the author of the post, truth?
It He is that I have this stepp ;)
Goodbye!
You get a better time in Superpi, but most likely the stability will suffer.Quote:
Originally Posted by Jackarturo
What a great chip. Nice temps too :)Quote:
Originally Posted by -De$troyeR-
What kind of watercooling do you use?
Monge :toast:
thx.... :cool:
it's a normal watercooling, nothing special.....
room temp ~24°C :)
http://www.xtremesystems.org/forums/...&postcount=527
THX, a very nice setup :)Quote:
Originally Posted by -De$troyeR-
A twin Mora 2?
And which Cpu head is that?
Monge :toast:
no a mora 2 pro + fan-adapter
http://212.227.231.249/watercool/cms...pics/20310.jpg
http://212.227.231.249/watercool/cms...pics/20570.jpg
the cpu heat is called nexxxos xp bold.
THX a lot :)Quote:
Originally Posted by -De$troyeR-
How many fans on radi and where's the pump?
Cobber tubes going from reservoir to Mora?
Cheers Monge :toast:
4 silent fans @ 12v :)Quote:
Originally Posted by Monge
in the front between hdd's and fan-controllerQuote:
Originally Posted by Monge
http://people.freenet.de/destro/Wak%...r/DSCF2395.jpg
yes, exactlyQuote:
Originally Posted by Monge
http://people.freenet.de/destro/Wak%...r/DSCF2170.jpg
cheers ^^ :toast:Quote:
Originally Posted by Monge
De$troyeR: THX for the pics :)
Very nice work/setup.
Cheers Monge
yes nice look,
man these 3700s are owning :P
you're welcome :)
thx :DQuote:
Originally Posted by Philosophy
best 3700 i've seen was:
3200@ 1,40V
3321@ 1,53V
3436@ 1.61V
in germany
greetz
It`s Stonkas 0547GPMW Joker.
jepp ;) hast recht :P
ImpressiveQuote:
Originally Posted by tHe_jOkeR
Air ? step please :)
watercooled. stepping : 0547GPMW batch 151 ;)Quote:
Originally Posted by boblemagnifique
People I just mounted the ZalMan 9500 LED on my 3700+ but :banana::banana::banana::banana: it quite suck...
@ 2950 Mhz with ~1,45V I get 59°C full load (on my MSI Neo2 Platinum)... what the hell?!?!
Get the TT BT with a stong fan...the best aircooling in my opinion;) But 59 load is to much for a Zalman 9500. Then the box cooler would be better:eek:Quote:
Originally Posted by Punisher!
With the BOXED I had ~65°C in the same conditions.Quote:
Originally Posted by BvK
Do you have TT BT? I can't get my GPMW stable @ 3Ghz with these temps... a friend of mine has bought the next KAB3E 0547GPMW identical to mine (except for the last number of the serial of course... his is 216, mine 215) and he has it 3 Ghz prime stable with 1,376V (watercooled).Quote:
Originally Posted by BvK
Mine should do at least 3Ghz air :(.
Why these :banana::banana::banana::banana:ing temps? I had put even the arctic silver 5...
one of my CABQE 0547GPMWs will do 3 Ghz with 1.36 volts on air ;)
room temp has to be a couple degrees below normal tho.
otherwise does 2.99, wants more volts for 3
WHICH air cooling would be appreciated ;).Quote:
Originally Posted by Absolute_0
Yeah... it is a temp. problem... this morning it's rock stable @ 3Ghz with 1,45V with the Zalman, but just because room is quite cold!!!
How could I have missed mounting the cooler?
Too much artic silver?
Arctic Cooling Freezer 64 ProQuote:
Originally Posted by Punisher!
Hot CPU, with stock volts loads at 40c
A possibility.Quote:
Originally Posted by Punisher!
As proposed, get a TT BT with a stong fan or a TT Sonic Tower with a sandwich of two fans.
With Freezer 64 Pro or the Zalman, I don't think you get much over 3000MHz/Prime95 stable.
3D stable at 3000MHz?
O RLY?Quote:
Originally Posted by Monge
http://img124.imageshack.us/img124/7013/305prime9tg.jpg
This thing has got so much more in it
http://digilander.libero.it/m4puni/Sandy/0.jpg
http://digilander.libero.it/m4puni/Sandy/21.jpg
(real V-Core is 1,45V)
SIOUX> Does SHG still have those awsome steppings in stock?? :D
Quote:
Originally Posted by Leverpospade
no...looks like they removed the E4 stepping from there homepage. now they only have rev E6 left....just tryed one..it sucks compared to the E4:)
Damn :( Well do you know anywhere else to get one of them great 3700+?
My 3000+ just died, so I'm looking for a replacement.
interesting comment about E4 and E6......my CABYE is an E4 and doing well.....didn't know there was a difference thereQuote:
Originally Posted by SIOUX
0547 GPMW = coldbug about 2°C :(Quote:
Originally Posted by Leverpospade
that's because of the mem controller revision -De$troyeR-... all the processors with a stepping like xxB1x, xxB2x, xxB3x have awful coldbugs...Quote:
Originally Posted by -De$troyeR-
kab3e 0547 gpmw
1377777l50037
http://img45.imageshack.us/img45/501...hz1552v5ib.jpg
3 ghz @1,408v bh-5@250mhz
3,1 ghz @1,504v
^
exactly like my CAB2E 0547 GPMW
These KABxE's, are they E4 or E6? Or both?Quote:
Originally Posted by dinos22
@ Whity: looking good! Maybe 3.2GHz is possible wenn you can get the temp unter 38/39 degrees.
no way. the cpu maxes out @3230 @superpi 1m.
maybe with a better ambient temperature it could get the 3200, but i don't want to open windows and doors :cool:
i have a question . whitch 3800+ is better ?
LBBW 0538FPMW
or
LBBW 0538FPCW
I would say the FPMW, but u do not ever really know. ;)
I would chose FPMW to.
Anyone tested a KAB3E FPAW?? :)
These clocks look awesome :slobber:
Looks like they have the box version in stock again :D Well I think I'll try one of those.Quote:
Originally Posted by SIOUX
my new 3700+ aircooled by freezer 64 pro IHS modded :D
http://membres.lycos.fr/starostise/K...tock_prime.JPG
still under load
1.36V :eek: nice chip my friend!Quote:
Originally Posted by starostise
That's just plain unbelievable, how the hell 3000Mhz on stock volts! :)
thanks :toast:Quote:
Originally Posted by before
one is a true single core san diego, the other is a toledo with a core disabled ;)Quote:
Originally Posted by ManagHead
update @ 3000MHz 1.32V aircooled done yesterday.
i have some problem with my ram, can't get 273*11 stable but 10*300 yes, i tried all timings synch and asynch, vdimm... for tccd's but doesn't worked.
i'll resolve this problem when i'll have the time :)
http://membres.lycos.fr/starostise/K.../3000_1.32.JPG
Quote:
Originally Posted by v0dka
my 0546 BPAW does also 3000MHz at stock volts.
nothing to mention.....
what about that?Quote:
Originally Posted by qujck
aircooled by freezer 64 pro
http://membres.lycos.fr/starostise/K...2004_1.32v.JPG
:D
Thats quite cool, but i only talked about the "3000MHz with stock volts" argument, and i never wanted to criticize your CPU. Its very nice :)
starostise: could you test the stability with Prime95? Really nice you habe there..is it with IHS on it?
why using prime95 instead of sp2004?Quote:
Originally Posted by BvK
the cpu is ihs modded, so it is with IHS on it :)
Kbg3e 0548 Cpbw
Daily "Prime95" approved:
(In-Large)
http://digilander.libero.it/m4puni/Sandy/23.jpg
(Blend)
http://digilander.libero.it/m4puni/Sandy/24.jpg
Here's my KAB7E 0547GPAW at 3080MHz on air:
http://img129.imageshack.us/img129/2...0mhz6tj.th.jpg
Damn... my Zalman sux... You have a TT, right?Quote:
Originally Posted by Monge
No, Arctic Cooling Freezer 64 Pro. But if I had to buy an aircooler today, I would go for the TT Sonic Tower or Big T with a stronger fan.Quote:
Originally Posted by Punisher!
Just my 2 cents.
Look here:
http://www.fan-x.de/testkcpu017_6.htm
But I'm going for High End watercooling now.
Damn... I discovered Arctic Cooling Freezer 64 Pro was better than Zalman after having bought it :(.Quote:
Originally Posted by Monge
Mine will boot at 3.0Ghz but it isn't anywhere near stable, if I popped the IHS, would it be?
Hey Im new to the forums, I saw this thread and became interested so I joined.
Well I must have got a really crappy one. I cant get it to boot past 2.7ghz even with 1.55 volts. I have crappy memory and have to run a big divider so dont look at the superpi time. Any ideas on why mine willn't even get by 2.7ghz?
http://i21.photobucket.com/albums/b2...rclocking2.jpg
Wow, CPUz is reporting that voltage very very wrong.. I'd say try a new bios..
As far as my chip goes, it's kind've bum as well, KABYE 0536 GPMW.. It's volt hungry for sure..
http://cbaltzer.googlepages.com/29spi.JPG
Quote:
Originally Posted by The Amish Kid
if I had a 3700+ that reaches 2.7 with that vcore I'd be happy!:D
then again... CPU-Z is for sure reading it wrong... so like haveblue said i should update your BIOS!
Yeah cpu-z is definitly reading it wrong. If you look at myguard that shows the real voltage. I will go see if there is a updated BIOS though
yeah those arn't bad clocks the 3ghz on air ones are just amazing.
haveblue, you need to be at 3ghz to get 29sec superPi 1m? theres something seriously wrong there whats your ram actually running at?
/Ed
Ram's divided down to run at (near) stock.. 408mhz I think it was. Timings are 3-3-3-8.. it's just cheap generic stuff.Quote:
Originally Posted by eddieate
hmm i guess thats it then, i cant remember exactly what i was getting 29sec runs at but i think it was under 2.8ghz which is what made me wonder about your score, nice chip you got there though where did you pick it up?
/Ed
Just from a local guy, not sure where he got it. Traded my 3800+ for it.. I don't regret it. lol :)
It's not really stable at 3.0ghz though.. made it through 3dMark05 the other day, but that was with the windows open to the cold Canadian winter.. nothing special for results though..
Must........resist.......buying.....3700+
Me and my pokey 3000+ at 2400mhz :(
very impressive.
so much for people being crazy about opties..
this beats the crap out of them.