G.SKILL F2-9600CL5D-4GBPI Sample testing

Printable View

Show 100 post(s) from this thread on one page

02-11-2009, 08:40 PM
zsamz_

Quote:

Originally Posted by Jor3lBR

zsam, Damm I don't know what to do with you! I guess I'll have to end up sending one of mine UD3P's or Extreme to you or show an above 12000Mb/s screen! :up::ROTF:

well bud if you sent me a gigabut board i will have to send it back

Quote:

Originally Posted by CryptiK

I think I know what zsamz is saying, the DFI UT P45 produces the best bandwidth of any P45 board I have seen for any given FSB / ram speed. It's faster than my Asus, and can clock higher too. It's not too far off the bandwidth of the UT P35 and that is no small feat.

Everest bandwidth/latency isn't the be all and end all though, I'd like to see some SPI32M & 3D runs of a UD3P vs a UT P45 at identical settings.

clock for clock dfi is faster than a gigabut and asus
02-11-2009, 08:42 PM
CryptiK

Quote:

Originally Posted by Jor3lBR

Very nice indeed I missed this post! :clap:

Now he won't be giving away his golden eggs will he?! ;)

He's probably in Phase Change on those ram or Ln2 pots.

Thought it was dry ice and ~2.6v
02-11-2009, 08:46 PM
Jor3lBR

Quote:

Originally Posted by CryptiK

I think I know what zsamz is saying, the DFI UT P45 produces the best bandwidth of any P45 board I have seen for any given FSB / ram speed. It's faster than my Asus, and can clock higher too. It's not too far off the bandwidth of the UT P35 and that is no small feat.

Everest bandwidth/latency isn't the be all and end all though, I'd like to see some SPI32M & 3D runs of a UD3P vs a UT P45 at identical settings.

I know DFI has better bandwidth even my DFI X48 has, although I would like to compare same PL's just to make sure. So far we are comparing PL5 or 6 from DFI against PL 8 on the Gigabyte.

Quote:

Originally Posted by zsamz_

clock for clock dfi is faster than a gigabut

I agree if tests would use same settings as Cryptek said but where will DFI be when you stop to bench the Quad at 4200Mhz and the Gigabyte goes on and on till 5000Mhz+++ :shrug: Not fair with poor old DFI:up:
02-11-2009, 10:07 PM
zsamz_

Quote:

Originally Posted by Jor3lBR

I know DFI has better bandwidth even my DFI X48 has, although I would like to compare same PL's just to make sure. So far we are comparing PL5 or 6 from DFI against PL 8 on the Gigabyte.

I agree if tests would use same settings as Cryptek said but where will DFI be when you stop to bench the Quad at 4200Mhz and the Gigabyte goes on and on till 5000Mhz+++ :shrug: Not fair with poor old DFI:up:

i built a system for a freind the idiot bought the gigabut p45-ds3p
i gotta a agree its an easy overclock for a quad 500x7 was a breeze on a q6600
but its not good enough in my book bandwidth is :down:
btw i had to wash my hands with ajax after i built the system
the only quad i would consider is nahaleem;)
then i gotta sell my stash of d9:eek:
btw my ut p35 spankin my dfi x38 in bandwidth;)
02-12-2009, 12:31 AM
CryptiK

Quote:

Originally Posted by zsamz_

btw my ut p35 spankin my dfi x38 in bandwidth;)

Yep, P35 is still the fastest s775 chipset.
02-13-2009, 05:52 AM
Highgertz

Hello all!

To disperse the 1608MHz to take dry ice and a ghetto-glass manufacturing

http://s52.radikal.ru/i137/0902/97/6c766805491ct.jpg

details here http://forums.topmods.net/viewtopic.php?t=2722

To improve specially fabricated copper-aluminum cup under nitrogen, but to the chagrin of success is not added. Stopped at 1608 MHz.

http://s57.radikal.ru/i158/0902/0b/fddc5af1451ft.jpg

Tested with UD3 and UD3P, may limit the memory or the motherboard. Bad that nitrogen did not give any increase in the dispersal
02-13-2009, 05:56 AM
Shiranui Gen-An

Quote:

Originally Posted by zsamz_

then i gotta sell my stash of d9:eek:

*Gets in line for the D9s*
02-13-2009, 06:09 AM
Highgertz

The glass on the chipset has added a lot of problems :shrug:

http://s56.radikal.ru/i152/0902/47/3df55b43ec45t.jpg

details here http://forums.topmods.net/viewtopic....2dcb712889b278

For the first time, it was interesting to work with nitrogen :up:

http://s54.radikal.ru/i146/0902/b8/3e2caa5ff3cat.jpg
02-14-2009, 05:16 AM
Smartidiot89

Is the 1200mhz CL5 stable on 2GB sticks? :shocked:

Any idea of when these will be out and what the pricerange would be?
02-14-2009, 06:48 AM
zsamz_

1 Attachment(s)

Quote:

Originally Posted by Smartidiot89

Is the 1200mhz CL5 stable on 2GB sticks? :shocked:

Any idea of when these will be out and what the pricerange would be?

price is around 300$ @ newegg if they have it in stock
a few more posts and you can see my set in the for sale section
this is 2.06v 1 pass of memtest 1306mhz
i only use high fsb i'm sure they can do more @ a lower fsb
02-15-2009, 11:41 AM
Roger_D25

Yeah its very nice to have a 4GB (2 x 2GB) of RAM that doesn't hold you back when clocking! Before this kit RAM was usually the bottleneck when working on high CPU clocks. With that said why are you selling your sticks zsamz, just curious?
02-15-2009, 03:45 PM
zsamz_

Quote:

Originally Posted by Roger_D25

Yeah its very nice to have a 4GB (2 x 2GB) of RAM that doesn't hold you back when clocking! Before this kit RAM was usually the bottleneck when working on high CPU clocks. With that said why are you selling your sticks zsamz, just curious?

i got over 40 gigs of ram :rofl: and i just bought more the funny thing is i got a few sets that i havent even opened:rofl:
and i just bought 2 more sets:rofl:another stupid move my board doesnt even like d9gkx :ROTF:
i should be sellin all my d9 n keep my gskills they are the best sets i own but i cant seem to wanna part with any of my collection
i got an itch to go ddr3 but it feels like cheating:rofl:
02-15-2009, 04:08 PM
Roger_D25

I kinda know how you feel, I've still got a few kits of D9's (Cellshock DKX and a Crucial GMH) and even though I don't use them much I still keep them around for low latency fun (at least until I make the switch to DDR3). By the way I just read through your specs and you weren't kidding around about having lots of RAM (infact you may have a problem), lol!
02-15-2009, 06:54 PM
zsamz_

Quote:

Originally Posted by Roger_D25

I kinda know how you feel, I've still got a few kits of D9's (Cellshock DKX and a Crucial GMH) and even though I don't use them much I still keep them around for low latency fun (at least until I make the switch to DDR3). By the way I just read through your specs and you weren't kidding around about having lots of RAM (infact you may have a problem), lol!

i was asked by an admin to make my spec list shorter
so its not all there :rofl:
i got 6 more pcs @ home n many older parts
and yes i got a big problem i hate sellin my toys
02-15-2009, 07:02 PM
neo mike

junkei

No doubt Z is a computer JUNKIE TO THE MAX:up:, saw your g.skills for sale here, your asking to close to new price, good luck.
02-15-2009, 10:02 PM
zsamz_

Quote:

Originally Posted by neo mike

No doubt Z is a computer JUNKIE TO THE MAX:up:, saw your g.skills for sale here, your asking to close to new price, good luck.

50$ less than retail lol + i payin the shippin
its proven stix
not newer revision that might not hit 1300;)
to be honest i dont care if they sell or not lol
02-15-2009, 10:13 PM
CryptiK

zsamz why dont you get all your D9 framed and hang them on the wall? Set them in a sheet of foam or something with little pockets for each stick and frame them, that would make great wall art :D

I'm not joking either.
02-16-2009, 03:04 AM
zsamz_

Quote:

Originally Posted by CryptiK

zsamz why dont you get all your D9 framed and hang them on the wall? Set them in a sheet of foam or something with little pockets for each stick and frame them, that would make great wall art :D

I'm not joking either.

are you nuts the foam can have static electricity n kill em :rofl:
i still got some nice tccd sticks from the old days:D
02-20-2009, 04:22 PM
jobol

I am really impressed by your overclocks. These sticks are good, but mucho $$$ :)
03-07-2009, 02:00 PM
radaja

just a quick test with my new 9600's on my UD3P with my 9650.thanks zsamz
http://i38.tinypic.com/1z19un6.jpg
03-07-2009, 03:40 PM
WaterFlex

Very good job radaja :up:
03-07-2009, 04:14 PM
zsamz_

Quote:

Originally Posted by radaja

just a quick test with my new 9600's on my UD3P with my 9650.thanks zsamz

uw enjoy
but u should be goin alot higher:yepp:
03-07-2009, 04:28 PM
radaja

zsamz,well i just got this board yesterday and im still feeling it out and the ram also.i will be going higher soon.
thanks waterflex.
03-09-2009, 06:19 PM
radaja

heres my latest with the 9600's,i think i can drop the vdimm to 2.14 and still be stable.
http://i43.tinypic.com/2po3xjm.jpg
03-09-2009, 07:06 PM
zsamz_

Quote:

Originally Posted by radaja

heres my latest with the 9600's,i think i can drop the vdimm to 2.14 and still be stable.

verry nice with a quad
how much nb volts u usin?
03-09-2009, 07:21 PM
neo mike

very nice

nice clocks Radaja, sweet. Can you post a everest run ?
03-09-2009, 08:05 PM
radaja

zsamz,NB volts are 1.44.neo mike,here you go.i kinda of sucks cause im on vista now.in xp i get 10k across the board and 49.5 latency.but what can you do its vista ,i like the way it looks.
http://i43.tinypic.com/2eav2tz.jpg
03-09-2009, 08:08 PM
neo mike

ha ha, i like the way it looks to, thats not a bad score, you have a solid setup there, bandwidth aint everthing. You running 8gigs ? or 4 gigs ?.
03-09-2009, 08:34 PM
radaja

4gigs for now but soon i want another four.i just hope that it will run with 8 gigs at this speed.
03-09-2009, 08:41 PM
neo mike

That could be tough to get 8 gigs at that speed, going to have to up the juice for sure, higher trfc, i see it has dropped in price on newegg, but still steep for dd2, i hope you can get 8 gigs going. You should go ddr3 Radaja for the price of that stuff, you could get a sweet 2000mgz cas 7 kit that will smoke that. Still a very sweet board, and nice setup you have.
03-10-2009, 12:38 PM
radaja

i kinda suck that my processor seems to need so much vcore to run high clocks.
http://i41.tinypic.com/2ur4hsi.jpg
http://i40.tinypic.com/263x89e.jpg
03-10-2009, 12:42 PM
neo mike

Yeah thats alot of juice, dont know how much quads can take, should still last long time, i cant wait to see you get 8 gigs of ram to that speed stable, that i want to see, but i think you can do it:up:
03-10-2009, 12:56 PM
radaja

yep and im not comfortable priming more than 15minutes with those kind of volts.i think im going to sell this 9650 and sell my dfi UT-P35-T2R and use the money to get myself a very low vid 9650,they run hotter but my cooling can handle it.i just want to be able to run 24/7 at 4400 or 4500 with decent vcore.something i cant do with this 9650 cause for 4500 i need 1.42-1.43 vcore.and thats just too much
03-10-2009, 01:52 PM
zsamz_

radaja why so much volts for 1295mhz
is the gigabut needin more juice than the dfi or is it the quad stress on nb
03-10-2009, 02:05 PM
radaja

i think both gigabyte and quad
03-11-2009, 10:39 AM
radaja

im just doing some quick test's,to see what the g.skill 9600's can do.
http://i39.tinypic.com/5f5ikg.jpg
http://i43.tinypic.com/121g1lj.jpg
03-11-2009, 08:47 PM
zsamz_

now thants nice with a quad
03-13-2009, 11:04 AM
radaja

here are some everest bandwidth test
http://i44.tinypic.com/r93ipy.jpg
http://i41.tinypic.com/wrgpjm.jpg
03-13-2009, 12:56 PM
WaterFlex

Sweet clock :up: Nice sticks!
03-13-2009, 01:37 PM
radaja

waterflex thanks,im really liking these sticks
04-25-2009, 07:49 PM
radaja

just seeing if i can get this thread back.
04-26-2009, 02:14 AM
Don_Dan

Quote:

Originally Posted by radaja

just seeing if i can get this thread back.

It worked! :D
04-26-2009, 09:43 AM
radaja

yep:up:got her back.thanks
05-08-2009, 11:17 AM
GSKILL TECH

DDR2 OC is going low now but DDR3 is goind up :P
DDR2 1200 4GBPI is the best kit as far as i see now
05-08-2009, 12:41 PM
proxis

are there more affordable versions planned?
05-08-2009, 01:59 PM
GSKILL TECH

Quote:

Originally Posted by proxis

are there more affordable versions planned?

get the 1000 CL4. this is a good kit too. or get the 1100 CL5. i see many user has no problme to reach higher but not as high as DDR2 1200 kit
05-08-2009, 02:03 PM
zsamz_

the price of these sets came down
i loved my set they have new happy owner now
but the ocz pc2-9600 is the set to have for the price;)
05-08-2009, 10:17 PM
WaterFlex

zsamz_
Where is the lowest price of this kit?
05-09-2009, 02:00 AM
zsamz_

Quote:

Originally Posted by WaterFlex

zsamz_
Where is the lowest price of this kit?

i see u in the future so cant say lol
but newegg had them in stock last i checked
ddr3 prices make these too expensive
05-09-2009, 02:49 AM
Smartidiot89

Talking about 2x2GB sticks that can clock.... ;) Also alot cheaper.
http://www.xtremesystems.org/forums/...d.php?t=223507
05-09-2009, 02:55 AM
Don_Dan

Quote:

Originally Posted by Smartidiot89

Talking about 2x2GB sticks that can clock.... ;) Also alot cheaper.
http://www.xtremesystems.org/forums/...d.php?t=223507

Thanks for posting this, very interesting! :up:
05-09-2009, 03:07 AM
tool_462

Really looking forward to those Blade's on the Egg :D Not seeing them yet, someone correct me if I'm missing them.

I plan to see how 8GB will fare in the EP45-UD3P :)
05-09-2009, 03:12 AM
zsamz_

Quote:

Originally Posted by Smartidiot89

Talking about 2x2GB sticks that can clock.... ;) Also alot cheaper.
http://www.xtremesystems.org/forums/...d.php?t=223507

man i feel like i been outa the loop:rofl:
those sticks lookin awsome for 50$ after mir
i must resist :rofl:
05-09-2009, 07:40 AM
Smartidiot89

Quote:

Originally Posted by zsamz_

man i feel like i been outa the loop:rofl:
those sticks lookin awsome for 50$ after mir
i must resist :rofl:

I am buying em at the end of this month:cool:

:banana::banana::banana::banana: resistance!:ROTF:
05-09-2009, 07:42 AM
zsamz_

Quote:

Originally Posted by Smartidiot89

I am buying em at the end of this month:cool:

:banana::banana::banana::banana: resistance!:ROTF:

mir is only for another week i think lol
05-09-2009, 08:26 AM
radaja

i want
05-20-2009, 12:28 AM
Bloodangel27

Fast DDR2,Vipers, or G.skill on my Dq6

Hey guys im having troubleee, ok MB is giga x48-DQ6, i wondering if i shld get Patriot Extreme Performance Viper Series DDR2 2GB (2 x 1GB) PC2-9600 Enhanced Latency DIMM Kit 5-5-5-12, x2 so will hav 4x1gb, or these G.skill 9200's that u guys have been testing, out, the reson for all this my dad is buying a home server so then my some of my rig comonets go into the surver and i geta upgrade my cpu atm is Q6700, looking at getting Q9650 and alos new ram between the previos that i linked, im not looking at huge oc's meaby a bit but i want a good increase from my 4g of team xtreem 1066mhz at 5-5-5-15s, so it will last a bit longer before i fully revamp to i7's and DDR3 which wil happen....eventully. ppl have ben having trouble getting the vipers 2 stock settings, but that was on maximus and ramage formulas, but im pretty sure my board is a newer chipset and a newer better board than the formulas, so im crossing my fingers and hoping they will both run on my board. i dnt kno HEAPS of stuff about RAM OCing or CPU ocing but i hav a general idea so no huge complex answers about skew timings and all that, i kno cas's and mhz and stuff thou....
05-20-2009, 04:41 AM
kagula323

Quote:

Originally Posted by Bloodangel27

Hey guys im having troubleee, ok MB is giga x48-DQ6, i wondering if i shld get Patriot Extreme Performance Viper Series DDR2 2GB (2 x 1GB) PC2-9600 Enhanced Latency DIMM Kit 5-5-5-12, x2 so will hav 4x1gb, or these G.skill 9200's that u guys have been testing, out, the reson for all this my dad is buying a home server so then my some of my rig comonets go into the surver and i geta upgrade my cpu atm is Q6700, looking at getting Q9650 and alos new ram between the previos that i linked, im not looking at huge oc's meaby a bit but i want a good increase from my 4g of team xtreem 1066mhz at 5-5-5-15s, so it will last a bit longer before i fully revamp to i7's and DDR3 which wil happen....eventully. ppl have ben having trouble getting the vipers 2 stock settings, but that was on maximus and ramage formulas, but im pretty sure my board is a newer chipset and a newer better board than the formulas, so im crossing my fingers and hoping they will both run on my board. i dnt kno HEAPS of stuff about RAM OCing or CPU ocing but i hav a general idea so no huge complex answers about skew timings and all that, i kno cas's and mhz and stuff thou....

Don't buy the Patriot Viper ... I have a kit 2x1GB DDR2 1200 and they are not D9 ... on taking the heatspreader off I found they are Elpida's. And settings of 5-5-5-12 are NVIDIA mobo profile's. On my Gigabyte EP45-UD3P I managed quite hard to get them at 1200MHZ and that with 5-5-5-15 latency and 2.3-2.32 vdimm. Also If u are going Q9650 way and don't need crossfire buy yourself a Gigabyte EP45-UD3P ... they are the best mobo's for Quad clocking and gonna save yourself from lot of problems comparing with u'r current mobo.

For ram just wait and buy when they are available in your region the new OCZ Blade Low Voltage Series 2x2GB DDR2 1066
Here are specs:

1066MHz DDR2
CL 5-5-5-18
Available in 4GB (2x2048MB)Dual Channel Optimized Kits
Unbuffered
1.80 Volts
1.85V EVP*
240 Pin DIMM
Pure Aluminum Heatsink
OCZ Lifetime Warranty

Part Numbers
4GB (2x2048MB) D/C Kit PN - OCZ2B1066LV4GK

LINK to ocz official page:
http://www.ocztechnology.com/product...e_blade_series

And the link to a living review going now on them from an XtremeSystems Forums user:
http://www.xtremesystems.org/forums/...d.php?t=224819

From my point of view Q9650 + Gigabyte EP45-UD3P + 4 or 8GB OCZ Blade Low Voltage series is the way u should go. It's the best decision I think one could take.

That's my opinion. Hope it helps you :up:
05-20-2009, 10:06 PM
Bloodangel27

I was looking at an upgrade in ram from my 4g of team dark 1066 5-5-5-15's, and yes im keeping my mobo and yes im useing Xfire, im only lookign at replacing RAM and CPU, ok then, yeah also these vipers that im talkign about are the green heatsink ones not the black, also it seems its goign to be very hard 2 get my hands on them over here, the G.skill that you guys have been testing i found at a shop in my city, costs around $350(AUD). i think that most of the users here r US but hey, to put that in perspective the Q9650 is goning to cost $485(AUD), anyway still wondering if the g.skill hould be the way to go.
05-21-2009, 06:06 AM
zsamz_

Quote:

Originally Posted by Bloodangel27

I was looking at an upgrade in ram from my 4g of team dark 1066 5-5-5-15's, and yes im keeping my mobo and yes im useing Xfire, im only lookign at replacing RAM and CPU, ok then, yeah also these vipers that im talkign about are the green heatsink ones not the black, also it seems its goign to be very hard 2 get my hands on them over here, the G.skill that you guys have been testing i found at a shop in my city, costs around $350(AUD). i think that most of the users here r US but hey, to put that in perspective the Q9650 is goning to cost $485(AUD), anyway still wondering if the g.skill hould be the way to go.

the ocz low voltage blades are commin soon i'd wait for those
if money no object get the gskills
i wouldnt touch them vipers i been hearin nothin but bad things about them
05-21-2009, 01:43 PM
xzulu

Quote:

Originally Posted by radaja

here are some everest bandwidth test
http://i44.tinypic.com/r93ipy.jpg
http://i41.tinypic.com/wrgpjm.jpg

Damn! 1325! That's a nice kit!!! SWEET!:up::up:
05-26-2009, 05:26 AM
radaja

yep,they are.i wish i still had them.but oh well.going to try the LV blades,hopefully
05-31-2009, 01:22 PM
xzulu

Quote:

Originally Posted by radaja

yep,they are.i wish i still had them.but oh well.going to try the LV blades,hopefully

Yeah, I'm also looking at those 1066 Blades, but still thinking twice on which to get.....

At least with the G.Skills there's a lot of headroom voltage wise...while the Blades need 1.9v (.05v higher than stock rating to run 1200).
05-31-2009, 01:29 PM
xzulu

@radaja

Dude did you see this post?

Quote:

Quote:

Originally Posted by Tony

OCZ are telling me they do even better on Intel boards...p45 6-6-6-24 1333 is on the cards they are saying so a good P35 should do OK also ;)

WTF!!!

Check it out: http://www.xtremesystems.org/forums/...=223507&page=3
05-31-2009, 04:08 PM
radaja

Quote:

Originally Posted by xzulu

@radaja

Dude did you see this post?

WTF!!!

Check it out: http://www.xtremesystems.org/forums/...=223507&page=3

yep i saw this.thats why i want a kit:D
thanks for pointing it out though,appreciate it:up:
05-31-2009, 06:32 PM
zsamz_

if gskills dropped the price on them 9600 to ocz blade levels i'd rather have gskills for less heat=dependability
05-31-2009, 07:38 PM
xzulu

Quote:

Originally Posted by radaja

yep i saw this.thats why i want a kit:D
thanks for pointing it out though,appreciate it:up:

No problem:up:

Quote:

Originally Posted by zsamz_

if gskills dropped the price on them 9600 to ocz blade levels i'd rather have gskills for less heat=dependability

True! Same reason I want to get the G.Skills. But between the 2. I would place my bet on the G.Skills, cause it's true rated to run 1200:up:
05-31-2009, 08:15 PM
zsamz_

Quote:

Originally Posted by xzulu

True! Same reason I want to get the G.Skills. But between the 2. I would place my bet on the G.Skills, cause it's true rated to run 1200:up:

n they never got warm even over 1250+
just makes me wonder what will me the failure rate of the low voltage blades will be
05-31-2009, 10:06 PM
Hoss331

Quote:

Originally Posted by xzulu

I would place my bet on the G.Skills, cause it's true rated to run 1200:up:

There are 9600 LV blades also that are rated at 1200.
05-31-2009, 11:29 PM
-n7-

Yeah i'll take the OCZ LV 1200 kits @ 1.8v (or lower, likely) over this G.Skill anyday.
06-01-2009, 05:54 AM
xzulu

Quote:

Originally Posted by zsamz_

n they never got warm even over 1250+
just makes me wonder what will me the failure rate of the low voltage blades will be

Yup, they run cool-warm...but never hot. even at voltages above 2.1v, Sergio told me:up::up:
06-01-2009, 11:15 AM
zsamz_

Quote:

Originally Posted by xzulu

Yup, they run cool-warm...but never hot. even at voltages above 2.1v, Sergio told me:up::up:

i measured temps with lasergun:yepp: never saw them go over 32c
06-01-2009, 06:54 PM
xzulu

I just ordered my kit!! :up::up:
06-01-2009, 08:17 PM
radaja

xzulu,your going to have a fun time with them:D
06-02-2009, 12:12 AM
xzulu

Quote:

Originally Posted by radaja

xzulu,your going to have a fun time with them:D

Thanks radaja.:up::up::up:

I'm looking forward to it!
06-05-2009, 05:57 PM
method526

i cant seem to get these to do 1300 or even 1250. i'm running 400x9 @ 1200mhz.

specs:
asus rampage formula
q6600 G0 @ 1.38v
4gb g.skill pi 9600 running 1200mhz on 2.1v
06-06-2009, 07:31 AM
zsamz_

Quote:

Originally Posted by method526

i cant seem to get these to do 1300 or even 1250. i'm running 400x9 @ 1200mhz.

specs:
asus rampage formula
q6600 G0 @ 1.38v
4gb g.skill pi 9600 running 1200mhz on 2.1v

you sure its 2.1v
you cant try 2.15v
06-12-2009, 11:08 PM
xzulu

I finally got my own G.SKILL F2-9600CL5D-4GBPI kit! tried it out at with the setting in my sig, passed IBT 20tests. Awesome ram!

And they dont even run hot at 2.1v, ward at load, and normal case temp at idle...
06-12-2009, 11:12 PM
zsamz_

Quote:

Originally Posted by xzulu

I finally got my own G.SKILL F2-9600CL5D-4GBPI kit! tried it out at with the setting in my sig, passed IBT 20tests. Awesome ram!

And they dont even run hot at 2.1v, ward at load, and normal case temp at idle...

enjoy em that is the best 2x2 ddr2 set anyone will ever see
but you should be able to do 1260 with that voltage;)
06-12-2009, 11:52 PM
xzulu

@zsamz_

Thanks! I tried running Q9650 425x9 and ram at 1275 just like what radaja, but at vdimm 2.12v and vnb at 1.34v i got a BSOD....

http://i43.tinypic.com/2po3xjm.jpg

Is it ok to run it at 2.16v 24/7 just like what radaja did?!

Thanks!
06-13-2009, 11:25 AM
zsamz_

Quote:

Originally Posted by xzulu

@zsamz_

Thanks! I tried running Q9650 425x9 and ram at 1275 just like what radaja, but at vdimm 2.12v and vnb at 1.34v i got a BSOD....

http://i43.tinypic.com/2po3xjm.jpg

Is it ok to run it at 2.16v 24/7 just like what radaja did?!

Thanks!

:yepp: those chips dont even get hot
but i still put a fan past 1200;) i think its safe even @2.2
06-13-2009, 01:10 PM
xzulu

@zsamz_

Ok great! Thanks for the info. I'll use an Antec Spot Cool to cool the ram.:up:
06-17-2009, 07:57 AM
WaterFlex

Guys, what is F2?
Is this one ?
06-20-2009, 08:20 AM
kuebk

I think that only for testing 2.4v is ok too.
07-24-2009, 03:10 PM
18 is # 1

O.K. I guess I'm joining....for $140.
07-25-2009, 04:15 PM
guess2098

now B P :banana::banana: is banana? !!
07-25-2009, 04:44 PM
TheGoat Eater

Quote:

Originally Posted by guess2098

now B P :banana::banana: is banana? !!

http://www.xtremesystems.org/forums/...d.php?t=230494
07-25-2009, 04:55 PM
18 is # 1

And this goes to GSkill 9600 how???
07-25-2009, 05:00 PM
Don_Dan

Quote:

Originally Posted by 18 is # 1

And this goes to GSkill 9600 how???

It just censors :banana::banana: ( see... read B P ) as in B!tspower... or in 4GB.PI.
07-28-2009, 07:11 AM
18 is # 1

Why is BALDWIN PARK , CA such a long way away???:bsod:
Tomorrow, it's Pi time!:D
07-28-2009, 01:34 PM
zsamz_

Quote:

Originally Posted by 18 is # 1

Why is BALDWIN PARK , CA such a long way away???:bsod:
Tomorrow, it's Pi time!:D

will you blame me if they are duds :rofl:
07-28-2009, 04:52 PM
Shiranui Gen-An

Quote:

Originally Posted by 18 is # 1

O.K. I guess I'm joining....for $140.

The price jumped up over $100 in less than a week!
07-28-2009, 05:33 PM
-n7-

Quote:

Originally Posted by zsamz_

will you blame me if they are duds :rofl:

They'll do DDR2-1202, no farther :ROTF:
07-28-2009, 05:53 PM
18 is # 1

Quote:

Originally Posted by -n7-

They'll do DDR2-1202, no farther :ROTF:

Damnit...don't even go there! :shock2: <as he wards off the evil eye>:bs:
07-28-2009, 08:33 PM
zsamz_

Quote:

Originally Posted by 18 is # 1

Damnit...don't even go there! :shock2: <as he wards off the evil eye>:bs:

maybe 1204:ROTF:
07-29-2009, 03:30 PM
18 is # 1

Damn you zsamz_!:shoot:
I can't get 1300 stable....

I did get 10K though

Much better than my 1066 Blades....

http://i383.photobucket.com/albums/o...ncan/1stPi.jpg
07-29-2009, 03:56 PM
andressergio

This are mines booted from bios at Q9650@ 4707 and testing 32M SPI run on W7x64 7600, on my UD3P they like volts on vdimm and MCH no way if not...

http://img44.imageshack.us/img44/2232/captura5.jpg

Cheers all :up:
Sergio
07-29-2009, 03:58 PM
zsamz_

Quote:

Originally Posted by 18 is # 1

Damn you zsamz_!:shoot:
I can't get 1300 stable....

I did get 10K though

Much better than my 1066 Blades....

man that suks
but i think its your board:rofl:
try harder n you dont need trfc higher than 56
dont be afraid to push 2.2v
07-29-2009, 04:01 PM
andressergio

Quote:

Originally Posted by zsamz_

man that suks
but i think its your board:rofl:
try harder n you dont need trfc higher than 56
dont be afraid to push 2.2v

yes its the board zsamz..awesome for quads but need volts on the vdimm and MCH as i mentioned, on my other asus they did PL7 till 1245 on lower volts...

btw..chips are not even warm even till 2,3...runing them on more than 2,24 for 8month now i have an antec spot cooler over them

Cheers :up:
Sergio
07-29-2009, 04:09 PM
zsamz_

1 Attachment(s)

Quote:

Originally Posted by andressergio

yes its the board zsamz..awesome for quads but need volts on the vdimm and MCH as i mentioned, on my other asus they did PL7 till 1245 on lower volts...

btw..chips are not even warm even till 2,3...runing them on more than 2,24 for 8month now i have an antec spot cooler over them

Cheers :up:
Sergio

i always said gigbut suks nothin new to me lol

i'm gonna teaze mr.18 a bit
2.1-2.2v cant remember
my board suked bad

Show 100 post(s) from this thread on one page

All times are GMT -8. The time now is 11:24 PM.

XtremeSystems