Up-date the 3850s have made it into the 17,000 point land it nock 17,131 score using 8.9 drivers, 4 3850 @710/874 , cpu 3.225 ghz. dohttp://service.futuremark.com/resultAnalyzer.action?resultId=8293054&resultType= 14wn
Printable View
Up-date the 3850s have made it into the 17,000 point land it nock 17,131 score using 8.9 drivers, 4 3850 @710/874 , cpu 3.225 ghz. dohttp://service.futuremark.com/resultAnalyzer.action?resultId=8293054&resultType= 14wn
Crap how do you post the link in so it works ??
You need to log in, make the result public in your ORB account and copy the Comapre URL it gives you, then in XS Message click on the link icon at the top of the window and paste the compare url in the window that opens....Quote:
Originally Posted by merkk1
nice score by the way, looking forward to seeing the compare url...
Thank you Kazgirl i try it again http://service.futuremark.com/result...&resultType=14 my rig hit a CPU bottelneck last night try using some video cards over clock that have work good for me in the past and the rig slow down i think the Phenom just can not driver the rig any faster why been clock at 3.2ghz in my bench testing setting. I did hit 113 FPS score in Canyon flight test (test of crossfire) so crossfire running darn good . Again thank you for the help Kazgirl i'am a old fart and not that good with this intertnet stuff like you young people are but i'am trying.
A little bump for ma self,before I fall out from the table:eek:
SocketMan SLI-8800gt 700/1750/1000 - Amd Opteron165 3133Mhz 12551
:rocker: Socket939 F.T.W.:rocker:
Update:
Sig Rig @ 3.3GHz and 3x CrossfireX @ 827/1267
17,958 - http://service.futuremark.com/compare?3dm06=8329010
So Stinkin Close to 18,000
Grats on the new score and mother board Ben Brown
Quote:
Originally Posted by merkk1
Hhaa talk about Brownie Points:rofl::up: J/K..
Now i have new goal to reach..dang ;)
Same here gotVoltage, its now time to reach that goal...:DQuote:
Originally Posted by gOtVoltage
Well i took my best shot at Ben brown but my rig has hit a wall at 17,131 for the first time my rig slow down when i started to over clock my video cards faster. I never seen that before on my rig . Not sure if the 750w PS is running out of power to drive the 4 video cards when overclock and the cards see the system short on power pull them self back or it could be with my CPU only able to hit a max over clock of 3.2 ghz there not enought CPU power to drive the 4 video cards faster . You guys got any ideas ???
I am almost 3000pts behind now....:eek:.. I guess I need to do something...I keep falling lower on the chart
My first guess would be the power supply. Do you have any case fans or extra drives that you can unplug to see if the extra juice makes a difference. I think that is the reason I am having trouble getting too much higher of an overclock on my machine is because of not enough juice and I only have three.Quote:
Originally Posted by merkk1
Well, my PSU is about to croke..It is smelling somthing nasty..But, I was able to finally run both cards and a good OC and here it is... Let me volt mod the other card and get it above stock.. And i My friend will have the record MuWahahahaha:yepp:
9950 @ 3.3ghz
2x HD 4850 X-Fire 1: 800mhz core/1050mhz mem, 2: 625mhz core/993mhz mem
H20 Apogee
Compare Link
http://3800z24.info/Phenom/9950/32bi..._HD4850_x2.JPG
Well Im back just hooked up the H20.... Temps are looking good.. running 3.5 doing a movie recode... 1place here I come..lol
http://img72.imageshack.us/img72/9109/tempswaterxf3.jpg
http://img72.imageshack.us/img72/tem...pg/1/w1143.png
Looky here
18,000
:)
Grats guys on all the great score . Ben Brown i been thinking about what happen on my 3dmark-06 run and i think your right power supply is starting to run short on power . I'am going to open up the case set up a fan to blow on the mother board pull off 3 of the case fans try a run see what happens . I give this a try when i get home from work tomarow .
Hi guys :)
3DMark Score = 18015 3DMarks
SM 2.0 Score = 6760 Marks
SM 3.0 Score = 8810 Marks
CPU Score = 5070 Marks
OS = Windows XP x86
CPU = Phenom 9950BE
BOARD = ASUS CROSSHAIR II Formula, BIOS 0701
GPU = ASUS 9800GT Ultimate
Drivers = 178.13
http://service.futuremark.com/compare?3dm06=8356886
http://img20.imageshack.us/img20/567...50beasunt3.jpg
:up:
;)What the heck...? that has to be 3 9800's or they are super clocked...LOL...nice score. I am less then 800pts away..just need to volt mod the other 4850.....and get a new PSU...Quote:
Originally Posted by aGeoM
oh..is the CPU-z right on the voltage??
Wow congrats BEN ,,GEO nice breakin the 18's
I started Ocing my little 9800GTX+
TA770//SB600
9950 @3.45mhz
Single (stockcooling)
9800GTX+ 830//2000//2400
Driver 178.13 Xp32bit SP3
http://i168.photobucket.com/albums/u...erra/16161.jpg
You must have sold your soul to the devil (I am looking at the 6660Quote:
Originally Posted by Ben_Brown
in SM2 test :rofl:) very nice 18.000:up::shocked::clap:
aGeoM
Does it for the Green Team !!!
What the f$#k is going on:shocked::clap::up: are you two markfixing?:rofl:
Both NV and ATI go 18000 !
Time for an update MSIMAX;)
Wow good job :up:Quote:
Originally Posted by aGeoM
*Runs off to do some more tweaking* ;)
I know that was scary!! :eek:Quote:
Originally Posted by SocketMan
I just wonder if, I was able to set a 3-Way SLI ... I got 4 of those 128 shaders 9800GT's ( Re branded 8800GTS I guess...) to test, all clock around 800 GPU/ 2000 Shaders/ 1100 Memory, without Vmod's.Quote:
Originally Posted by charged3800z24
ATI's are the way to go, but can't CF them on nvidia chipset :( , something that AMD/nVidia should work together to enable both CF/SLI in the chipsets, similarly to I***l X58 Chipset.
No, vCPU in BIOS is 1.58~1.60v.
Very good score, man.:up:Quote:
Originally Posted by gOtVoltage
My best single 9800GT score was around 15k.
Just to full fill MSIMAX will. :rofl:Quote:
Originally Posted by SocketMan
Thanks man...your's too.:up:Quote:
Originally Posted by Ben_Brown
:toast:
Imagine if someone ran 4x 4870X2's in CFX with a 3.2GHz to 3.6GHz AMD Quad :eek:.
If someone sent me the GPU's I'll be glad to do that......Quote:
Originally Posted by fatguy1992
I am pretty sure that only a max of 4 GPUs can be used. Besides, I don't even think they make a power supply that could run 4 of those and a quad.
they'd be on 8x for all 4 of the cardsQuote:
Originally Posted by fatguy1992
PS ultra 1600watt PS FTW you probably would need an extra PS for the extra two cards for there 8pins anyways.
MSI K9a2 to fit the cards.
dual monitor 1920 x1200
*updated* nice work work ppl excellent work :up:
SocketMan gOtVoltage i need the links to your current scores
so i guess 19k is around the corner:sofa:
Ben_Brown is that cpu speed for all cores
msimax...can you update my specs please ;)...9950 BE 3.3ghz x4, 2x HD4850's Crossfire.Quote:
Originally Posted by msimax
are your card clocked differentQuote:
Originally Posted by charged3800z24
Yes it is.Quote:
Originally Posted by msimax
Well i'am not going down with out a fight cpu 3.262 ghz. 4x3850 @710/950
3Dmark-06 17,233 . I try to posted the link but when you click it.It come
back can http://http://service.futuremark.com...?3dm06=8367173 not find the page .I have no idea why
Delete one of the http:// and it works fine
yeah...Quote:
Originally Posted by msimax
2x HD 4850 X-Fire 1: 800mhz core/1050mhz mem, 2: 625mhz core/993mhz mem
Thank you guys for the help :up:http://service.futuremark.com/compare?3dm06=8367173
Well guys you go and look out at ORB 4 of us hold Phonem 3dmark-06 hight scores . Nanohead holds the 4870 class 18,566 , Ben Brown hold 3870 class 18,000 , Charged3800z24 holds 4850 class 17,239 . I hold the 3850 class 17,233 i think that perty much kicking ass in the Phonem cpu class. :clap:
http://service.futuremark.com/compare?3dm06=8357048
There ya go Max.
:woot: :cheer2:Quote:
Originally Posted by merkk1
Go Amd & Ati!!!!
http://service.futuremark.com/home.a...3AF7940017C9E6Quote:
Originally Posted by msimax
one last run with my 8800gt - will bring some single 4850 scores soon
phenom x4 9850 @ 3.36; ht@2400; nb@2400
foxconn a7da-s orig bios
4x1gb g.skill pc8500 @ 960 5.4.4.12 unganged
msi 8800gt @ 697/1817/966 nvidia driver 178.13
windows xp x86 sp2
Your system
3DMark Score 14470 3DMarks
SM 2.0 Score 6057
SM 3.0 Score 5887
CPU Score 4926
http://service.futuremark.com/compare?3dm06=8378014
http://img525.imageshack.us/img525/5859/98014584zg3.png
That's pretty good :bows:Quote:
Originally Posted by Ben_Brown
But not good enough
Ben_Brown goes down
New score from me 18064
Ice Spider V2.0
Phenom 9950BE @3.424GHz(on 4 cores)
CF 4870's @790/1100
Cat8.8
ASUS M3A79-T Deluxe
Not bad I've only been running the new board and CPU for a couple of hours
^^
Old news
New, new high score
http://service.futuremark.com/compare?3dm06=8379701
3DMark06 18577 :shocked:
SM2.0 score 7010
SM3.0 score 9146
CPU Score 5110
Ice Spider V2.0
Phenom 9950BE @3.547GHz(on 4 cores)
CF 4870's @750/900
Cat8.8
WinXPSP3
ASUS M3A79-T Deluxe
Dang,, Nice job. Amazing Three eeks a go 16500 was barely a blip on the screen:ROTF:
Grats to everyone and there new high scores !!I think a lot of it has to do with what the SB750 chips is doing for everyone overclock . That one item has had a big impack on people score.
That is an awesome score!! Good Job! :up:Quote:
Originally Posted by AMDDeathstar
Now get another 4870 and break 19,000.
O and in the shadow of this I did get a new score last night 18,057
9850 BE @ 3366
3x 3870s @ 864/1287
Around Oct 17 :up:Quote:
Originally Posted by Ben_Brown
The new board is more stable then the M3A32-MVP, but on newer batches of CPU's caches can handle the overclocks better
let me get my new PSU and volt mod my other 4850.. I will be back Baby LOL
Great scores everyone...
:coffee:
msimax hadn't had enough coffee when he updated
I switched processors 9950 now
and gpu speeds were 750/900
:)
8.10 Beta Catalyst Drivers
Vista x86/x64
http://www.megaupload.com/?d=DYBRA1YZ
XP x86/x64
http://www.megaupload.com/?d=JVVGAXK9
Quote:
Originally Posted by SocketMan
That link works for the PC that I run the mark with.
Does not for another one:confused:
Using the free version,let me know if the link isn't working for you and
I'll run another one (preferable the same day you're going to update:p:)
@Hondaguy
The link says your 9850 is rejected,better then my dead one anyway
Quick update, new CPU....
125W 9950BE (JAAAB AA 0833 CPBW)
Phenom 9950BE @ 3100Mhz
HT @ 2000Mhz
NB @ 2400Mhz
RAM @ 1066Mhz
2 x 4850 @ 700/1150 - Catalyst 8.10 Beta 8.54
http://service.futuremark.com/compare?3dm06=8470107
3DMark Score 16265 3DMarks
SM 2.0 Score 6119
SM 3.0 Score 8240
CPU Score 4248
Still nowhere near you 18K plus guys.... I'm still wating for my M3A79-T which I hope will boost the 9950BE a bit..... on this SB600 M3A32-MVP even the new 9950 will only do 3.1Ghz stable....
If anyone has any tips on BIOS settings to try with the 125W 9950, and M3A32-MVP, I'd love to hear them.... current settings are:
CPU Multi: x15.5
CPU Freq: 200
NB/CPU Multi: x12
NB Freq: 2.4Ghz
RAM: DDR2-1066 Unganged
CPU Voltage: 1.45v
CPU/NB Voltage: 1.45v
RAM Voltage: 2.1v
CPU VDDA: 2.8v
CPU Tweak: Enabled
Go into the BIOS and under the Adv.tab and then down to Chipset . Make sure your running the cards in the blue slots. Under port 2 which is your top GPU under Gen2 High Speed Mode, changed that to Autonomous Switch then down to Slot Power limit changed that to 200-225(goTVoltage had it to 255) on Air. Link Width to 16x... Do the same thing to Port 11 which is your other GPU. NExt under Advanced, down to Hyper Transport.Isochronous Flow-Control- Enable that....Try that and do another test
Hi HG..
I've got the PCI-E slots configured OK...
Got them set at Autonoymous and x16 Link Width, havn't changed the Slot Power though its still at default 75W.... when I tried increasing this before, PC would fail to POST....
I'll give that and the HT suggestin a try now and let you know what happens...
Thanks
@ Kazgirl -I really do recomend benchmarking under xp32. Using Vista (esp X64) seemd to be losing a fair amount in the CPU score although i have noticed mnor changes (improvement) in SM3 on Vista X64.
What Gener_AL said
64 bit OSes need more power to run
the most I've been able to get my 9950 to run Vista Ulimate 64bit was @3.250 with 1.55 vcore
WinXP and Vista Home Premium 32bit I can do 3.440@1.55v GHz no problem
Also increasing your PCI-E speed will give you a boost to 3DMark score
I run mine at 119 MHz
Either increase the PCIE Frequency or enable Auto Express and then back it down with AOD
For me, if I did both ,things became unstable.
Hi HG..Quote:
Originally Posted by HondaGuy
Well I tried the HT Flow setting and the Slot Power changes.... it did POST this time, but after 3 runs of 3DM06 all 3 showed a drop in performance with an average 1018 lower 3dmark score.... thanks for the suggestion though..!!
Hi Gener_ALQuote:
Originally Posted by Gener_AL (UK)
Thanks for the tip, I could use 32-bit but I use (2 x 2GB) 4GB of RAM, so use 64-bit OS for this reason.... I know that it will yield lower OC in general. But I'll keep it in mind....
Hi AMDDeathstar..Quote:
Originally Posted by AMDDeathstar
Thanks for the suggestions on that as well, I have already got Auto Express enabled, and my PCI-E runs at 124Mhz as a result, I've tried it enabled and disabled with manually adjusted PCI-E speeds, but the best result seems to be with Auto Express enabled... I also have CPU Tweak enabled.
The 9950BE does boot to Vista at 3.2Ghz and even at 3.3Ghz but fails to even complete a single run of 3Dmark Vantage / 3DMark06... and proves to be unstable.... I was hoping for better than this, but maybe the new SB750 mobo will help when it arrives, which I'm hoping will be today or tomorrow...!!
The highest I can get stable enough to complete 3DMark on the SB600 is 3.1Ghz, I've tried increasing the CPU Voltage and CPU/NB Voltage up as high as 1.5v but still nothing....
Thanks for the tips guys its appreciated...!!
Hey No problem Kazgirl, just with my machine if my NB@2400 I can boot into windows and be stable....But the Hyper Transport.Isochronous Flow-Control, I need to have it Enabled in order to boot the NB@2600 and also the HT@2600, If I dont have it enabled it just wont boot. Try overclocking with the CPU tweak OFF at first,, you can enable it after in windows by the red dot in AOD...Just looking at your sig, I see your running bios 1202,Update it and see if you can Overclock it more, I dont think 1202 is stable.ALso you might have to turn down your PCIE, I see you have it at 124, IN Bios leave it on Auto, then you should be able to OC the NB and HT more, I find anything over the 115, its not stable or even just wont boot
http://img407.imageshack.us/img407/741/sta72269rb7.jpg
http://img407.imageshack.us/img407/1794/nb26pd9.png
updated ppl
it would be to see amd in the 19~20k spots maybe with two 4870x2:yepp:
Time to get back in TOP 20!!
This is my entry:
ORB - 15897
Score - 15897
SM2.0 - 6090
SM3.0 - 7367
CPU - 4849
Windows XP MCE x32
Cat. 8.8
HD4870 825/1050
CPU 3333MHz; NB 2365MHz; RAM 1146MHz 5-5-5-15-26 2T
BTW this is not my final clock...
All AIR
and thanks to my new Phenom 9950 JAAAB 0831CPMW!! :cheer:
PS. This is highest single card / single core score on the board (both ATI and nVidia)
:party::party3::party:
Oooo Lightman so close ,,Crank that ATI ,make it scream:D
9950@3455mhz
TA//770/sb600
Hee he single 9800GTX+ 830//2160//2400 Stockcooler @ 16161..
MSIMAX,,
oops my Nvidia Single GPU on line 11 isnt a 8800gts512 sry for confusion.
Lightman,,
look for the 8.8beta 8.522.2..(4870x2 driver) it scores better than 8.8whql for single 4800's
Here is my first entry:
3DMARK06 - 17302
SM 2.0 Score 6416
SM 3.0 Score 9016
CPU Score 4368
Phenom 9950 @ 3.4Ghz
DFI 790FXB-M2RSH
CF HD4870 512 @ 750/900
8GB DDR 1066
Vista x64
Cat 8.9
Well, very nice target to aim for :clap:Quote:
Originally Posted by gOtVoltage
I will push my card a bit and tweak new Phenom a little ;) (maybe opening a window during cold British night will help as well :p:)
All that will need to wait till Thursday unfortunately :( --> WORK
So keep pushing! You've got 2 days to improve :D
My promised update:
16323 - Phenom 3376MHz / HD4870
http://img241.imageshack.us/img241/4...0cpu337aj4.jpg
3DMark06 Score: 16323
SM2.0: 6285
SM3.0: 7582
CPU: 4908
System spec:
Phenom 9950: 3376MHz all cores 1.45v; NB 2321MHz 1.375v
Memory: 4GB OCZ @1124MHz 5-5-5-15-26 2T 2.1V
HD4870 512MB: 860MHz Core / 1080MHz Mem - no mods, stock cooler @80% Fan
Just joined the 18k club
3DMark Score 18120
SM 2.0 Score 6725
SM 3.0 Score 8962
CPU Score 5068
DFI 790FX-M2RSH
Phenom 9950 @ 3536Mhz
HD 4870 @ 790/900
8GB DDR 1077
XP 32bit
Nice giong guys :yepp:
Maybe its just me, but am I missing something with my HD3870? Its clocked @ 877\2.5GHz with DNA 8.8, CPU @ 3.4GHz 380FSB, memory @ 1216MHz, yet 3DMark06 only returns a score of 11,701. I would of thought somewhere between 12,500-13,000 would be more like it :shrug:
Ok that is it, I making making a final run for the top spot. I am going to give it everything I got. Be afraid, be very afraid......I am very scared. I just know something is going to melt..... :D
:coffee:
:eek:Quote:
Originally Posted by Ben_Brown
:ROTF:
May the Force be with you. Good luck
Look's like I'm off to the shops this morning
Congrats Jaivan
@Jawin:
Great run!!
I know you're saving higher card clocks for near future :p: 18.5K by any chance??
@Ket:
Maybe it's Vista?? Have you tried XP??
@Ben_Brown
:shocked:
Can't wait!!
Well Im breaking 13,200 with a HD2900XT (512bit bus)..........with lower clocks on the gpu, gpu memory and the cpu than you......sooo:shrug:Quote:
Originally Posted by Ket
also 16,xxx for crossfire 4850's seems very low to me compared with my card, 17,000 to 18,000 would be what I would have expected, and with crossfire 4870 giving 20,000-21,000 :shrug:
I'm running XP Pro. Its the wierdest thing ever. I really do think I should be able to get around 12.5k at least.. perhaps my CPU is causing a bottleneck, I know the HD3k series loves a meaty CPU.Quote:
Originally Posted by Lightman
TBH it's wired, but once I had corrupted XP Pro x64 is such a way that my 3DMark scores were like 25% down but CPU intense applications were working fine. That happened after some update either to Windows or to GFX driver. I've reinstall OS and everything went back to normal.Quote:
Originally Posted by Ket
Quote:
Originally Posted by AMDDeathstar
Thanks a lot.Quote:
Originally Posted by Lightman
That was an all air bench with stock coolers on the 4870's didn't want to push them to much.
I'll push harder when I get my water setup and going :D.
updated:up:
I'm not liking Vista, it's tougher to get stabler higher clocks
my CPU score dropped off going from XP to Vista
This isn't going to be as easy as I thought
I may have to switch to Vantage
Edit:This was a test run I'll give it a few more tries
http://i231.photobucket.com/albums/e...nchr/3dtri.jpg
Thats crazy results for the same hardware and just different OS...
200mhz more with Phenom should actually improve the score more than 250-300points i would think...
Thats odd.. I hope that hasn't happen to me this install of XP Pro isn't very old.Quote:
Originally Posted by Lightman
That is an awesome test run :clap:Quote:
Originally Posted by AMDDeathstar
:up::up::up::up:
After a bit of tweaking (read hours)
http://service.futuremark.com/compare?3dm06=8612138
Main test results
3DMark Score 15788 3DMarks
SM 2.0 Score 6126
SM 3.0 Score 7366
CPU Score 4637
Phenom 9850 cores 0,1 & 2 @ 3198mhz, Core 3 @3092
PowercolorHD4870 815/1125
This is one fun things about this board,you get to try all kinds of combo's
QuadFire 2x3870/2x3850
http://service.futuremark.com/compare?3dm06=8475061
3DMark Score 18175 3DMarks
SM 2.0 Score 6743
SM 3.0 Score 9481
CPU Score 4577
3870's@776/1126 3850's@669/829
Phenom 9950 @3.4GHz (1.55v)
Vista 32bit SP1
Cat8.9
One for the Nvidia side
http://service.futuremark.com/compare?3dm06=8475562
EVGA 9800GT SuperClocked
3DMark Score 13547
SM2.0 score 5741
SM3.0 Score 5455
CPU Score 4587
Phenom 9950BE @3.4GHZ
9800GT Stock Speeds
Vista 32bit SP1
GeForce 178.24
I thought I had better post this one before I try any more
Saved the best til last
Quote:
Old news
New, new high score
http://service.futuremark.com/compare?3dm06=8379701
3DMark06 18577 :shocked:
SM2.0 score 7010
SM3.0 score 9146
CPU Score 5110
Ice Spider V2.0
Phenom 9950BE @3.547GHz(on 4 cores)
CF 4870's @750/900
Cat8.8
WinXPSP3
ASUS M3A79-T Deluxe
Ask and ye shall recieve Triple 4870'sQuote:
Originally Posted by Ben_Brown
:party:19709:party:
http://service.futuremark.com/compare?3dm06=8625915
3DMark06 19709
SM2.0 score 7146
SM3.0 score 10519
CPU Score 4901
Phenom 9950BE @ 3570 MHZ(on all 4 cores)
TriFire 4870's 750/900
Vista 32bit SP1
FarCry2 Hotfix driver
(210*17,NBx12,HTTx12,PCIE@105,vcore1.55v NBvid1.3v,HTT1.28v,NB1.28v,SB1.28,disabled ACC,Autoexpress,Microcode update and ganged mode,enabled CPUTweak(that's all I remember for now))
I had to beef up the cooling coil from the 1/8" fridge rad to 1/2" copper tube coil, that came out of a heat exchanger at work, to get a stable run at 3570 for 3DMark06
Temps went from 35c to 25c
It was good enough to get a SuperPi run at 3604 MHz
:toast2:
It's Crown Royal time
Cheers
Grats man that just a great run go AMD/ATI woot!!!!
Message to AMDDeathstar --->:woot: Your prize ->:oscar:
me going --> :slobber::eek2::shock::dammit:
Man that is an awesome score. You are so close to breaking 20,000 with a phenom. That would be great. You have to go out and order another 4870....come on quadfire....woohooo!!! Good Job!!
Also there went my chance at taking back the top spot. I just got the #4 3780 in today, but I am waiting on my Corsair 1000w PSU to come in before I can overclock everything to the max and make a run. I am hoping for at least 18,500 though. We shall see.
Thank guys
No more vid cards
My plan for awhlie has been to replace the heatpipe coolers
I got the guys at work to cut a copper plate to cover the pwn's fully, now I just need to attach cooling to it
Then I have to figure out what I want to do with the NB and SB
If it wasn't for those damn heatpipes the NB block would've been replaced along time ago.
now that I can get past 3.55GHz without blue screening I want to see just how far I can go
:cord:
Show no mercy. Take no prisoners.
nice work man
Well I went ahead and ran some benches last night to see what my 4x 3870s could pull off. It seems that in 3DMark06 they are severely CPU limited. So I hope to at least break 18.5K once I get my new PSU to give me a little more stability when overclocked.
18,211 - http://service.futuremark.com/compare?3dm06=8635984
CPU @ 3366MHz - 4x 3870 @ 864/1272
i just got a 4870 so of course i had to run it with my 4850 at least once before i get rid of the 4850...
http://service.futuremark.com/compare?3dm06=8647044
3DMark Score 17882 3DMarks
SM 2.0 Score 6819
SM 3.0 Score 8979
CPU Score 4659
vista 64
9850 ,,, 14x240 @ 3.36ghz
ht link ,,, 2400
nb ,,, 2400
ram ,,, 4x1gb @ 960mhz 4-4-4-12 unganged
4800's ,,, cat 8.8
4870 @ 780mhz core ,,, 1090mhz mem
4850 @ 690mhz core ,,, 1148mhz mem
Well I messed around with ACC last night and got a little higher score. Still need my new PSU to make everything stable and really overclock these cards though. I am now hoping to break 19,000.....we will see.
18,612 - http://service.futuremark.com/compare?3dm06=8659438
CPU @ 3415MHz - 4x 3870 @ 864/1272
NiceQuote:
Originally Posted by Ben_Brown
Show no mercy. Take no prisoners.
3.5 ghz and you should break 19k ;)
imo
Standard 1280-1024 (17925)
1920-1600, 4AA, 16AF (17504)
Vista 64
M3A79-T
9950 (140w) 3.3
1066 ram
2 4870X2s (800-900)
That was 1920-1200
Well going from 3366 to 3415 brought me about 400 extra points in 3DMark06. That is only 49MHz per core. That really tells me how CPU bound these four cards are. If I can get bench stable with another 50MHz per core I should hit 19,000. Maybe when it gets colder.Quote:
Originally Posted by Fatalbert
I went from Auto on ACC to +2,+2,+4,+4. I am going to test it soon to see what I get when I completely turn off ACC.
i need to get oof my a$$ and volt mod the other 4850...i am getting kicked down the latter again..:p: Nice job guys.. Just think by Dec. we might have a few break into 20,000
OMFG congrats on those scores :up:
need to clock my stuff moar :D
Can't wait that longQuote:
Originally Posted by charged3800z24
going to try before i go back to work Tuesday night :D
3DMark Score 10371
SM 2.0 Score 4578
SM 3.0 Score 5344
CPU Score 2152
http://service.futuremark.com/compare?3dm06=8675414
X2 4800+ (Brisbane) @ 3GHz
MSI K9N Neo V3
Corsair 4GB @ 800MHz 4-4-4-12
HIS HD 4850 ICEQ 4 (non-turbo version) @ 630MHz/1003MHz