Printable View
http://img.photobucket.com/albums/v6...sPrime4Ghz.jpg
Q6600 L724A 4Ghz
eVGA 680i
4x1GB D9GMH
Silverstone Zeus 750
CPU loop: Dtek Fuzion, Thermochill 120.3, Petra topped DDC-2, MC-Res Micro
GFX/Chipsets loop: EK8800GTX, MCW-30 x2, Thermochil PA 120.2, Petra topped DDC-2, T-line
Raptor 150x2
Great clock - congrats.
guys...sorry to be a newbie, but...what temps can i expect to see on a q6600, at 3.2ghz...lets say...1.45v (to be sure) cooled by a tuniq T?
I'm betting mid to high 50's under load. Hopefully you won't need to give it 1.45v for 3.2ghz though.Quote:
Originally Posted by VIctorj
Wow, 4GHz prime stable is pretty awesome. Hovering around 70C is not quite as awesome, but it within the G0's TDP. :)
I agree! and with a 680i too! I'm torn! I have a p5k premium comin tomorow. My current G0 isn't even stable at 3200 on the 680i. Same batch as turtles. Right after i ordered the p5k-p, i got an e-mail from MSI RMA. My second 8800ultraOC is comin back to me!! I guess i'll test my second G0 that will be here tomorrow on the 680i then install the asus and compare. I hope the 680i can hang. If it can't, i have an ultra fer sale :)Quote:
Originally Posted by Omastar
Could we add more info to the database such as:
Memory Specs (Timing, Voltage, CPU:FSB ratio, Brand, Speed)
Motherboard Specs
What air cooling product (not feasible with water since sould be custom)?
It would make it easier than to search through individual threads.
Here go some suicide shots :D
Config:
CPU: Intel Q6600 L724A784
MB: Asus P5K Premium
RAM: Team Xtreem DDR1000 C5 1G X 2
Display Card: Nvidia 8800GTS 640M cooled by EK Block
WaterCooling + air conditioner direct blowing
Laing D5 Pump
BlackIce GTX Extreme 240
Dtek FuZion
using 266strap, 4:5 divider, 1.7V Vcore
http://bbs.ocqq.com/attachments/foru....jpg.thumb.jpg
http://bbs.ocqq.com/attachments/foru....jpg.thumb.jpg
Eat this G0 steppings! :p:
System
- Q6600 B3 ES L632A953
- Kayl Black FrozenSS 1/4HP
- Asus Commando 1404 bios flashed from 1001 bios
- 128MB Gainward FX5200 PCI
- 2x1GB Team 6400C3 Micron D9GMH cooled by 3x 60x25mm Sunon 23.5cfm Maglev fans
- 160GB Seagate 7200.7 SATA
- Pioneer DVR-08 Burner
- Sony FDD
- 620W Corsair HX620 Modular PSU
- WinXP Pro SP2
@ 4104hz - 9x456FSB at 1.4875v bios
vcore of 1.4875v bios set = 1.464v
Evap idle = -39.6C
Evap Systool Quad 16M Pi load = -32.6C
Room temp = 24.5C
Power-Mate Wattage Meter = 256.4W systom systool quad 16M Pi load
http://fileshosts.com/intel/Asus/Com..._validated.png
Idle
http://fileshosts.com/intel/Asus/Com...stool_idle.png
Load
http://fileshosts.com/intel/Asus/Com...stool_load.png
Complete
http://fileshosts.com/intel/Asus/Com...ad16M_cpuz.png
Asus Commando/Speedfan/coretemp temp sensors are all out of whack with Q6600 B3 ES so ignore temps. Only used Evap temps for proper indication of load :)
While not very extreme, here's my air OC for my G0 Q6600. I tested with Prime95 for 10hrs.
http://i190.photobucket.com/albums/z...90x91.368v.jpg
ASUS P5K Deluxe BIOS 0505
Q6600 SLACR (G0 - 3.51Ghz - 390x9 1.368v)
Thermalright Ultra 120
eVGA 8800GTX
2x1024 G. Skill DDR2-800 2GBHZ
Seasonic M12 700
nice eva2000, but dont the es cpu's usually clock higher than retail chips?
@turtletrax...nice work on the 680i, and with 4 sticks of ram??? wow!
see,s like we can all expect at least 3.4 on these chips, with the better ones clocking from 3.6~4.0
Maybe it's just me but does the q6600 throttle down when idle? It seems like it only runs at 1600Mhz when only a few small programs run. Or is that just CPU-Z? I also get a temp reading of 15C when at 1600. Isn't that a bit low even at that speed with a TT Big Typ VX?
You need to disable all of the extra cpu features from the bios.Quote:
Originally Posted by Moe_Szyslak
Speedstep is already turned off. all thats left is c1e support, max cpuid value limit and cpu tm function.
What exactly am I supposed to disable? I'm new to the Commando, there are some many more options over the a8n-sli :P I'm not sure what exactly does what. All i know is that the multiplier keeps switching between x6 and x9
Turn off C1E Support. I was having the same problem with my mobo, couldn't work out what the hell was going on!Quote:
Originally Posted by Moe_Szyslak
Also, anyone got any tips on overclocking a B3 stepping Q6600 on the P5k Deluxe? At the moment I'm sticking with 3.2ghz/1.375vCore because that gives me reasonable load temps of 74c. Upping the core speed/voltage further puts it into the 80c range, and I'm not happy with that. Running a Tuniq Tower...I'm thinking maybe I need to do some lapping?
Thanks, I'll try that. And about the lapping. The Tuniq tower has a pretty poorly finished base. Lapping it could potentially lower the temp a few degrees C.Quote:
Originally Posted by reflux
Here's a good guide.
http://forums.techpowerup.com/showthread.php?t=19
Ah, cheers for that :)Quote:
Originally Posted by Moe_Szyslak
It worked :) I turned it off and the multiplier stays at x9.Quote:
Originally Posted by reflux
Thanks :up:
No problem :)Quote:
Originally Posted by Moe_Szyslak
What's it for anyway? is it a power saving tool or something? It does stay at x9 under load right?Quote:
Originally Posted by reflux
On another note, on stock speed and under full load i'm getting temps of up to 55C and idle around 40C :down: and thats with a TT Big Typhoon VX and Akasa 5022 Thermal Compound. This seems a bit on the high side, even for stepping B3. Is this right?
I really wish I remembered the show a voltage before I took this screen shot and closed everything out... This was done with 1.30V under load, and roughly 78F-80F ambient.
http://img480.imageshack.us/img480/1451/primezx7.th.jpg
I have so many problems with IP35-E I did this on that I am going to RMA it, and have a P35-DQ6 on the way, in which I will go for 3.6GHz - I will be blasting the AC making sure the ambient is down to 65F or so if I need to when I do it. I'm guessing 1.40V under load will get me 3.6GHz stable. When winter comes I'll open the windows and let that 30F air come into my room in maybe go for 4GHz, I already almost killed my Gigabyte 965P-DS3 when I did 3.8GHz at 1.45V load for a few minutes - the PWM area on the DS3 gave off a foul smell but so far the board works with an e4300 still... I never realized the PWM actually overheated until if you look in the screenshot above - 76C with a fan on it. No fan = 88-90C at that speed, and on the DS3... 3.8GHz... they must have hit 125C or something.
G0 are good chips.
This may be a bit Off topic. But I've never used Prime95...... How do I set it up to test my Q6600?
Always used Orthos :shrug:
Thanks.
First Q6600 OC :up:
Quote:
Hardware: (System not in a case)
Asus P5K Deluxe (Bios 311)
Thermalright Ultra 120 Extreme (With the help of a 300CFM indoor/outdoor fan)
4GB DDR2 1066 Crucial Ballistix Tracers
WD 250GB SATA HD
Thermaltake 750W
MSI NX6800 (8800GTS requires WCing)
I'm very pleased with this so far for air cooling :up:
http://img133.imageshack.us/img133/7600/capturegi2.jpg
http://img361.imageshack.us/img361/9442/capturedf1.jpg
I need help with load testing in Prime95, I've never used it before. How would I set it up to test this Q6600? If someone could PM me, that would be great!
Download prime95 25.3 here. Just extract the zipped file to its own folder/directory, create a shortcut to prime95.exe if you wish, or just click on the exe. It will automatically run 4 threads for you :up:
:D
http://img148.imageshack.us/img148/2...ime1024rj9.jpg
Shot at 2007-08-04
http://img174.imageshack.us/img174/6530/4400mhzst2.jpg
Shot at 2007-08-04
Yeah, C1E is a power saving state. Not very useful for overclocking.Quote:
Originally Posted by Moe_Szyslak
What are you measuring those temps with? I'm getting those at 3.2ghz, 1.375vCore. CoreTemp seems to be the most accurate. I've got a Tuniq Tower, AS5, and the large side-panel vent on my Gigabyte 3D Aurora 570 so I can't see any other way of reducing the temperature without lapping the HSF (which I think I will).
PC Wizard 2007, Asus PC Probe II, Asus AI Suite. I get a CPU temp of 16C but core temps of around 35 when idle. Temps seem to have dropped a bit due to lower ambient temp. This is all still at stock speed.Quote:
Originally Posted by reflux
@1badhabit - what are the temps with the case closed and under its own cooling?
L724A639 7/13/07 pack date u120ex cooled.
http://i55.photobucket.com/albums/g1.../3.6stable.jpg
What do Vista 64bit users stress test with?
I've used P95. Works just fine with x64.Quote:
Originally Posted by LIKMARK
Thanks mate:)
I have this on 1.45 Vcore 3.2 ghz with tuniq.Quote:
Originally Posted by VIctorj
Diode shows 49 degress, coretemps varies from 60-65 degrees on full load.
Hope this is answer good enough.
B3 or G0?Quote:
Originally Posted by J0lle
Hey guys! Simple question before i start to overclock that Q6600 G0 L724A :
Here are my temps ATM with 1.304v real (1.3250v set). I used the thin line across the cores method to apply my AS5.
IDLE:
http://img526.imageshack.us/img526/5831/34657rd3.th.gif
LOAD:
http://img241.imageshack.us/img241/5...6453qp7.th.gif
Do you guys think i should try to remount since i am getting 5c difference between core 0-1 and core 2-3 during load? Is it normal ? Thanks!
I remounted a couple of times and I still get a difference of about 5-6c between core sets. Seems like it is normal.Quote:
Originally Posted by Patriote
Let 'er rip !!!
LOL Thanks m8. Am starting right away! :DQuote:
Originally Posted by turtletrax
I have another question doh.
Is it all right to use Prime95 x 4 with Small FFTs to stress my Q6600 ?
Oh and in Coretemp, i see my Tjunction @ 100c. Now i remember that with my E6600 it was at 85c. What is the difference between both ? What is actually Tjunction ?
Thanks :)
Got it stable finally.
User Name: ChronoReverse
Stability: 4 Hours Prime95 25.4 Small FFTs
CPU: Q6600 G0
OC: 3.6GHz (8x450)
Stepping: B
Week: L723
Code: A930
Vcore: 1.456V~1.488V
VID: 1.2750V
Cooling: Air
Cooler brand/model: Ninja Plus Rev.B (CPU and HSF both lapped)
Motherboard: Gigabyte GA-P35-DS3P
Bios Version: F3
Operating System: XP 32
RAM brand: Patriot
RAM rated speed: 6400
RAM actual speed: 900
Latency: 5-5-5-15
http://img409.imageshack.us/img409/2840/q6600ys9.png
My P5KC runs 450 fsb all day :yepp: (Yes, with the Q6600)Quote:
Originally Posted by sdumper
Can some one help me over clock my rig GA DS3P mobo, q6600 go stepping,2 gigs 8500 ram, TT 120 extreme heat sink. i dont want mess up because this is my first time overclocking. i need some basic step for overclocking, which programs do i need for measuring temp? btw i only want go up to 3.0.
when i overclock can i jump from 2400 to 3000 or should i go slowly ?
any one own GA DS3P mobo here with q6600?
It is a B3 :)Quote:
Originally Posted by Moe_Szyslak
Thank god. All I see is G0's getting decent numbers. Finally a B3. With a little luck I can do the same.Quote:
Originally Posted by J0lle
The ultra 120 extreme is a bit tricky to mount, anyone has this better to the washer mod, or get new screws, mine was giving me all kinds of wierd temps in the beginning, intill i took it out and found out it wasnt making full contact with the base of the heatsink.........
Difference is about 7-8ºC here, lapped CPU and Ultra-120, AS5, mounted 290348908349082 times, and the diff is the same :(Quote:
Originally Posted by Patriote
7c difference between cores 1,2 67c load and 3,4 60c load.Funny thing is when stress testing the cooler cpu's would always fail first.
The difference between cores will increase when one core is stressed more than another.
Quote:
Originally Posted by RIPPER
Yeah thats weird. I'm going to remount right now and see what gives. I'll post back :yepp:Quote:
Originally Posted by rbsmontemor
4.500ghz
super pi stable WAJ
http://i107.photobucket.com/albums/m...Untitled-1.jpg
core1 - 60Quote:
Originally Posted by Moe_Szyslak
core2 - 60
core3 - 67
core4 - 67
Aways like that when priming, idle is 28-28-36-36...aways.
Well, looks like im not the only one with that prob :D It's a luck then that i didn't re-mounted right away. I won't do it now. Thanks for the inputs guys!Quote:
Originally Posted by rbsmontemor
Anyone else think the 2x coretemp1, 2x coretemp2 unevenness could be attributed to voltage/current imbalance within the chip?
my b3 idle @ 3.2, 1.46v, silent air cooling:
cpu: 32c
core0: 50c
core1: 48c
core2: 43c
core3: 45c
my coolest core was usually also the first to fail when I was close to getting it 8hr+ prime stable at higher clocks (up to 3700)
I think it's not a problem, but a characteristic of some units...what do you think? I've already lapped mine...so, RMA is not a possibility (and in Brazil it would take forever).Quote:
Originally Posted by Patriote
Anyway, I'm just happy with 3600@1.39.
Rbs
Hell yeah, thats a great voltage\clock combo! I don't think ill lap that Q6600. Temps are kinda great except for that 5c-6c difference... :rolleyes:Quote:
Originally Posted by rbsmontemor
http://img172.imageshack.us/img172/7806/34656jx7.th.gif
It's nothing like stressing with Small FFTs on Orthos but still, those are great temps, i think.
Okay, my mobo finally showed up today.
I'm priming away right now at 3.6Ghz @ 1.42v. (I probably can go lower.)
temps
max temps I've seen so far: 58-58-54-54
G0 from ClubIT 8x450FSB
P5K Premium mobo
PDP DDR2-667 D9 @ 450FSB
This mobo is much more complicated than my old P5W DH.
So many more voltage and mem options, I don't know what to do with them all. It will take me awhile to get used to it all and find a good 24/7 OC.
So far, I'm happy with my goal of getting 3.6Ghz with this volt and temp... :)
here is a 3dmark06
http://i107.photobucket.com/albums/m316/wcd26/oc2.jpg
Problem is one of the cores.Quote:
Originally Posted by Moe_Szyslak
Core 0, 1 and 3 can do 3450.. but core 2 fails miserably.
I think this has something to do with the vdroop.
This core is also noticeably colder than the other three so i think with a vdroop-mod it could get stable on that speed.
Im running on air so i will not push it too far though, temps runs up to 65 on the cores on 3360 Mhz after 7 hours orthos on the 3 "good" cores.
Maybe i will have to step it up a notch and invest in watercooling.. we'll see:)
My Quad 6600 can go pass over 395x9, My mobo is P5WDH, i want to ask, what is temp maks this quad? (maybe 80 for core and 60 for cpu, if pass then this proc can restart ar burn maybe? )
Sori my english is not very good.
http://img295.imageshack.us/img295/1...me35ghzxq7.jpg
http://img487.imageshack.us/img487/7...s458mhzxi0.png
and i think 975x can go pass over FSB 400 because latency always more than 965P and P35, (Like DR1 and2) DDR1 can go over 300Mhz but can beat DDR2
http://img515.imageshack.us/img515/1...5ghz975fb4.jpg
http://img515.imageshack.us/img515/1...51adaa3289.jpg
This is P5K asus
http://img523.imageshack.us/img523/2...50x9p5kra5.jpg
http://img523.imageshack.us/img523/2...1129fd69c8.jpg
Maybe you can try yourself with another P35 Mobo , or make compare with N 680i with 975x , and uploading to this forum
Andinobi your P5W will prolly be limited to 400 region mate, because it has tighter latencies on the memory controller, every board /chipset has it's sweetspot...
If you run the same speeds on the P5K so 9 x 400 you will be on par performance with P5W, this again proves that some high FSB and mega ram overclocks aren't always better (it might help in some benchmarks...) ...due to strap changes and co...
Here's my latest...
Thankfully I have good cooling because the Vcore required for Prime stability is Xtreme (1.6V idle drooping to 1.55V load)!
Processor is a B3 X3220 at 400x9 (3.6GHz) on a DFI 680i board (other info in my sig)...
http://members.shaw.ca/virtualrain/O...table-3600.jpg
my 24/7 oc:
Q6600 B3 L645G523
3.4ghz (425x8 1.44v)
Evga 680i NF68-A1(570)
Thermalright Ultra 120 Extreme
10+ hour p95 large fft, 11+ hour p95 small fft stable, 23 hour xvid DEcode loop
before I RMA'd this mobo it was fully stable except xvid would lock, now it's all good :D
http://img529.imageshack.us/img529/8...ableei2.th.jpg
Why are there 2 database threads?
Good question. This one seems to have been abandoned regarding keeping the actual database up to date. The other one is being kept up to date.Quote:
Originally Posted by AcuraDC5
Hi guys. I will add my results to the database thread once i'm happy i have my system stable. Just a quick question though and that is how much confidence should i have that my Everest and coretemp temps shown here under load are acurate. They seem very low espeacially considering i am only air cooling?
http://i38.photobucket.com/albums/e1...2006/temsp.jpg
3.7 and only 1.2875v? And temps in the region of 45-50C? Even for a G0, that's really low. Especially for aircooling. Somehow I don't trust these results.
Did you really set the Vcore on 1.2875? That would be exceptionally low when running at 3.7
1.2875 is the VID, tested recommended minimum voltage for stock settings, not his actual vcore ;). I guessing his real vcore is somewhere around ~1.47v-1.50v. Nice overclock btw cliffy :up:Quote:
Originally Posted by Moe_Szyslak
@post below: *wants to get a G0 now :(. Looks at his own 1.485vcore :shakes: ... *
No mate thats the VID. CPU is set to 1.4 in bios actual is 1.39 as shown in the everest side panel which should just about be visibleQuote:
Originally Posted by Moe_Szyslak
Hey Cliffy that's a sweet clock. :up:
Temps don't seem abnormal since that screenshot is showing prime has only been running a few seconds. Check the max temp by running small FFT's. You should see peak temp after about 10-15 minutes.
With the temps people are achieving with the T120 extreme i'm kinda kickin myself in the ass for being a cheapo and buying the Scythe infinity instead. Not only is the thermalright 120 extreme smaller and lighter but it cools much better it seems. You live and you learn.
My Result for the Database:
- dertimaushh - 3.807ghz - 1.50v - Gigabyte P35-DQ6 - P95 Stable (G0) - aircooled with normal abient temps :up:
http://www.hostpix.de/080315/o85427eE.jpg
Got my Go today, priming at 3,6 1,4v set in bios. Speedfan says 1,36v but so far its stabel. Its an L726B, vid 1,23v.
My Q6600....
Q6600 G0 | L725B057 | 3608mhz | 1.352V | Liquid |
http://img75.imageshack.us/img75/445...4368fu9.th.jpg
http://img169.imageshack.us/img169/2...5578ia7.th.jpg
Q6600 G0 | L725B057 | 3708mhz | 1.40V | Liquid |
http://img241.imageshack.us/img241/7...140vnk5.th.jpg
http://img411.imageshack.us/img411/6...140vzm8.th.jpg
By;)
Hi all..
Need an advice here...i'm running my q6600 with msi 975 Power up but have a problem ..COULDN'T RESTART FROM WINDOWS...here my stats :
1. Reaching 370 x 9 with divider 1:1.25 stable at orthos 12 hours, passed the cinebench smoothly, passed super PI 32m but couldn't restart from windows..after windows shut down and the computer no respons..not boot at all..need to be turn off then turn on again and the comp working normally..
2. Reaching 390 x 9 with divider 1:1 stable as stat no 1 and...again couldn't restart same as no. 1
Have trying :
1. raising the all voltage ..no effect..
2. loosing the mem timing..no effect...
Do i miss something here or just hardware limitation..? hoping to reach 400 x 9 and stable....thanx in advance all...o yes..the stable i could get 360 x 9 wuth divider 1:1.25..meaning no error at all test..
Q6600 G0 L712A839
http://valid.x86-secret.com/show_oc.php?id=237304
http://valid.x86-secret.com/show_oc.php?id=237327
http://valid.x86-secret.com/show_oc.php?id=238455
http://valid.x86-secret.com/show_oc.php?id=238459
http://valid.x86-secret.com/show_oc.php?id=238784
more pictures here :up:
http://www.sx-team.com/forum/index.p...st=0&#entry808
Hey, I'm new to this forum, and signed up 'cause I have this problem that really bothers me when OCing.
My processor is an adequately cooled G0. Thing is, It runs at any speed I set it to, even 4ghz at 1.58v, but it's never stable after a certain time. I'm currently running it at 3.4ghz at 1.42v, but I'd like to do 3.6. One thing that you guys can help me with is provide me with a link, or tell me what certain features do.
I have in my p5k-e bios the option to disable certain features under "CPU settings" like Vanderpool, and the rest.
Also, do I need to lock my FSB at 333, or put more voltage through the north bridge/southbridge?
Some help would be much appreciated. thx.
Will the 6850 oc to 4.0 be faster for video editing then the Q6600 oc to 3.0. All will be aircooled.
I think they will be very close to oneanother, the quad will be better on Mhz/rendering comparison if the software uses all the 4 quads to do the calculations on...
I have owned the 6850, never got 4ghz stable below 1.55 Volts, and it ran very hot for a GO : 65°C at 3.9Ghz on the cores, replaced it with a Q6600 at 3.6ghz, feels smoother in everything I do and temps are lower with the quads under WC, really funny to experience...
What were you able to oc the Q6600 to with air cooling for a semi low temp.
I've got my Q6600 @ 1.44-1.45 (can't remember what I set it to and no program can read the vcore right) at 400x9 and around 66 deg C at load (warmest core). S-Flex on the Ultra-120 eXtreme is spinning at ~1000-1100rpm. Didn't lap anything, using the provided TIM, and didn't even do the coin mod for the Ultra-120 (mine doesn't come with the plastic washer)Quote:
Originally Posted by ingeborgdot
B3 or G0?Quote:
Originally Posted by jmmtn4aj
G0. I think 66 deg c would be a bit miraculous for an unlapped B3 :pQuote:
Originally Posted by Moe_Szyslak
A man can dream, right? ;)Quote:
Originally Posted by jmmtn4aj
Meh, I bumped the voltage up to ~1.472 trying to get this OCCT stable. Still won't do it but I'm not bumping it up any more since temps are near unstable range (~71), at 68-69 in the warmest core right now. It's stable folding a few WUs with and without the room's AC unit though, so I'll leave it till I get around to tightening the HSF (even out the thermal load) and changing the TIM. If that isn't enough, guess I'll lap the HSF, CPU, or both
Quick question guys.
I ran my system through prime95 blend test and one of the cores popped an error after 5 and a half hour during the 192k test. Is this a problem with CPU or RAM? Settings as follows:
FSB:450
Multiplier: 8
Vcore: 1.4625 bios 1.44 actual
vcore reference: auto
Pll: 1.5
NB: 1.4
NB reference: auto
FSB termination: 1.3
SB: 1.05
SB reference: auto
6400 ballistix at 4-4-4-12-auto @ 900 @2.2V
Thanks for all the help.
First crack with this chip on stock Vapo LS, looks like my P5K3 is FSB limited but I'll work on it.
Max stability test session but not for 24/7 use
http://pix.nofrag.com/b/6/c/68a8b8f0...a1da13e7tt.jpg
My 24/7 use
http://pix.nofrag.com/8/b/9/830dc733...19063293tt.jpg
Hey guys,
I got my q6600 @ 3.6ghz running 1.31volts (cpu-z and speedfan).
My question is about my temps, cause speedfan is picking up the CPU @ 62
But the cores are only at 58.... **ive adjusted it to add the 15 degrees**, and this temp is confirmed by coretemp 0.95.4 which is reading the same.
Is my mobo cpu temp. sensor screwed???
thanks guys.
Prolly yes, I'm not claiming coretemp is 100% accurate but I always take that as a reference... cool voltage to go for 3.6ghz... you got a good one there.. we have similar issues with the Asus boards after a bios updates CPU temps rose 10 degrees after the bios update though coretemp and everest reported normal temps for the cores...
Probably correction via an upcoming bios update, I had F7 on my previous builds...
L737B064
http://img264.imageshack.us/img264/3...00primebb6.jpg
Rbs.
:wave:
Hey Guys,
Q6600@ 3.6ghz (400 x 9)
Still o/c'in but this is current.
http://valid.x86-secret.com/show_oc.php?id=281129
Running 1.34v / 1.33v loaded
--Tested Under Prime95--
Gigabyte P35-DS4 bios F9. Loadline calibration enabled from bios. Working like a charm :woot:
http://img209.imageshack.us/img209/6...uistit4wl8.gif
Just got the chip recently, went straight to 3.6Ghz / 1.45v, no luck.
After an hour of messing around, just settle for 3.46 for now. Tried 5 mins OCCT stable, here's a screenie of me just loading it up a bit.
1.6 vCore (BIOS), P5K SE, Generic old DDR2-667's, Bigwater 745 all fans @ 5v
L737B687, rather disappointing, was hoping at least 3.6 stable with sweet all voltage.
see that VID? out of all the chips i've tried, lower vids = better.
See screenshot
Quote:
Originally Posted by Akane
Yeah thats right, a VID of 1.325v is about as high as I've seen so far. The Quad I am testing has a VID of 1.300v which is only slightly better but a few lucky guys here have these chips with a low VID and it seems they do get a better overclock?.Quote:
Originally Posted by Isriam
Still 3400MHz is nothing to sniff at, would like a crack at 3600MHz myself but I don't think its happening on the P5B-Deluxe?
http://img155.imageshack.us/img155/3...0mhz003jm3.jpg
I decided to push my L737B to the limit tonight :)
Here is the max validation I could get... 4,2Ghz kept freezing while trying to validate :(
http://valid.x86-secret.com/show_oc.php?id=289804
Cooling is a plain lapped TR Ultra-120 with a Silverstone fan at max speed :)
The voltage was set to 1,568V, but I did'nt try lower... For 4,2 GHz I tried up to 1,6V without any success...
My L739B is 3.6GHz@1.312v P95 Small FFT stable @ 450x8
But for Blend/Large FFT I need 1.33v to get it stable. Sounds strange to me ?
Core2Quad 6600 @ 3709Mhz Liquid Cooling | ASUS P5K Premium | 2x1GB Corsair 6400 4-3-3-9 2T
http://img440.imageshack.us/img440/3...ubitmapod1.png
Found my 24/7: 4.1 @ 1.5v (real)
Q6600 L737B, Maximus Formula, Water cooled
idles around 35-38 and never tops 68c at full load (small ffts)
ran and hour of small ffts now I'm priming away on the blend test... 1 hour in
couldn't be happier :D
http://i37.photobucket.com/albums/e82/sonofander/41.jpg
But they also run hotter don't they? My absolute limit seems to be 1.35V loaded with a TRUE because my temps will easily pass 70C during prime in a room that's 20C. But the good thing is mine can do 3.6GHz with 1.328V loaded (maybe less) so I'm happy with it.Quote:
Originally Posted by Isriam
http://i248.photobucket.com/albums/g...88/3600_2a.jpg