cool man ....thanks honestly I dont even benchmark really.. flawlez talked me into it.. hes my friend along with crapfacetacular2 ... really the sarcasm was all in fun.. dont work to hard... work sucks...lol
Printable View
cool man ....thanks honestly I dont even benchmark really.. flawlez talked me into it.. hes my friend along with crapfacetacular2 ... really the sarcasm was all in fun.. dont work to hard... work sucks...lol
here's my AM2 Sys
now i'm first in AMD SC & AMD DC :D
:banana:
http://s3.directupload.net/images/070825/5VM5gL5i.jpg
Yeah I saw the picture later on, sorry bout that, and I didn't know that you knew them from before :)
yeah we all know each other from worldofcrysis forums and guru3d but guru3d sucks big time now so we just go to WOC .. alot more fun and no mods power tripping..
So hopefully an update this week MOFO? lol
updated thru post 257........
.........the rest in the morning
I wonder if i can break 8.5K for the S939 crowd with some ice?
anyone wanna place an oppinion: would exceptionally tight timings at ~200 (as tight as the mobo will allow!) or slacker timings at ~240 be better on the ram?
Tight timings AND high mhz is the best, but if I had to choose, I would definitively go for the tighter timings on any s939 setup. Even though I don't know what Nuclearus likes best... you could try both ways and see :)Quote:
Originally Posted by Cheffy
Since I have two sets of sticks, one 2x512 TCCD and one 2x1024 UCCC, I prefer the 2x1024 since it's actually more memory than the other one (2gigs instead of 1gig), but that don't make the TCCD any less worth.
Actually... My 1GB TCCD @ 300 MHz 3-4-4-8 1T is ONLY(!) making me lose 59(!) points in 3DMark06 in comparance to my 2GB UCCC @ 233 MHz 3-4-4-8 1T.
Make of it what you will, but I really think the tighter the timing the better, but it's more up to your memory controller then what you'd think, and mobo for that matter. Couldn't get any ram stabile over 233 MHz using the cpu-closest memory channel on mobo, so I tried switching, and then I easy set TCCD to 300 MHz (HTT 300, multi 9x and divider 200 (1:1)) and UCCC to 245.5 MHz (HTT 300, multi 9x and divider 166).
It's like with women.... the tighter the better :D
EDIT: And I might add, that the reason I use UCCC instead of TCCD now, is that 2gb loads my games and everything else faster than 1gb. I think my TCCD kicks ass to :D Could've placed in a HTPC or made a real nice recording/studio PC with it :) See sig, might just do that, with the "still missing mobo for this s939 project" :)
hehe
i have 2*512mb 5B-G's that do about 208mhz 2-2-2-6-1T with subs at something daft like 7-9-1-2-1-1-1 (ill be exact later) - but wont go past 225 even at 3-4-4-10-2T
and 2*1024 5B-F's that memtest upto 264 with 3-3-3-8-1T 11-14-2-2-1-1-2 or whatever. (and go much higher on a multi with slackened sub timings), they also do about 245 @ 2.5-3-3-8-1T with same sub for days in memtest but wont boot windows on my dual core :/ (single core will, but that wont post above 253htt with the 5B-F's)
the 2*1024 are much the better in real world apps, for sure.
but for benching. ill have to test :)
*edit*
All sticks are Crucial Balistix PC4000 (non tracer). the 512's are old '05 originals the 1024's are lead-free '07 shiney
Just curious, but are ya'll using PC4000 memory?
I just realized you have your 6000+ at 3.6. Nice OC Turrican! How long have you stressed it? Is it 24/7 stable?Quote:
Originally Posted by Turrican
My UCCC's are PC4000, but TCCD's on my shelf are PC4800 :rolleyes:Quote:
Originally Posted by FlawleZ
Quote:
Originally Posted by FlawleZ
24/7 i'm using 3550mhz. unfortunately the cpu suffers from the coldbug.
if i could get higher temps, maybe there's a higher clock possible.:yepp:
super-pi 1m max. is @ 3615mhz.
cpu-z -->3700mhz
when i've more time, i'll try to get higher :D
Alright dude. It's been forever and a day since we've had an update. I'm not trying to sound like an ass but if you're too busy or just don't have the desire to check this often, then let someone know so we can have this thing updated as it should be. This would be probably be far more popular if people saw an actively updated thread. Instead, we're now weeks behind.Quote:
Originally Posted by SOLDNER-MOFO64
Death intel e6600 @2.4 real speed [4005] = 12859
CPU: Q6600 @ 3015Mhz
Mobo: Dfi Inifnity P965-S
Ram: 2Gb Mushkin Xp6400 @ 419Mhz 5-5-5-15 2T
Cooling: air - Scythe Ninja
Result:15787
ALL UPDATED guys ;)
Sorry for the delays, been real busy lately...hardly any free-time.
Rest assured I got my girlfriend to stand on one of my nutz as punishment:shock2:
Got a new score of my own but I'll submit in a while as I have some good temps here.
Let me know if any of you guys spot any errors :)
If I've missed anyone, sorry in advance.....just re-post and I'll sort it.
damn i might have to retry my E66 maybe push it a bit harder see if i can go up a few points.
Hi my rig:
q6700ES L712a612
p5b dlx
Liquid cooling
geil ultra 800@950 4-4-4-12
http://img523.imageshack.us/img523/4...clearushw0.jpg
seems to be an OK score for Q6600
Bugger, couldnt get it to boot at much higher than last time, so i just tweaked ram some more, only worth a few points, but its a bit better... Not going to bother anymore untill i get a quad or something.
http://img381.imageshack.us/img381/8...neclearte1.jpg
My Q6600 results:
http://i175.photobucket.com/albums/w.../nuclearus.jpg
woo more Q6600!
Here ya go my both quads:
Q6600- 21671 Marks
http://img522.imageshack.us/img522/7...8092007tc5.jpg
X3220- 20392 Marks
http://img413.imageshack.us/img413/8...nching1zh7.jpg
A little fun with the E4500. Interesting to note its smaller L2 seems to have little effect on its performance in this benchmark.
http://img.photobucket.com/albums/v3...7NuclearMC.jpg
repost from the F3 thread but supose It best to post in here offically.
10K A64 X2 :)
10020 Mark @ 3824Mhz DDR2-546Mhz 4-4-4-6-11 2T
http://img187.imageshack.us/img187/2...nuclearyc8.jpg
all updated guys :)
Congrats again mAJORD, that's an insane score you got there :)
Incidentally, you find the low HTx helps with OC or were you just testing?
Nice seeing the big guns from the AMD bench rolling in...if only Jiu-Jitsu's board didn't have a bad flash yesterday when we finished setting it up, we were gunning for 14K easy. Looks like we'll have to wait a couple more weeks....
Oh and Soldner, I think you need to move Jiu-Jitsu's score up 3 spots. Forget how to count? ;)
pmsl it's official.....I'm now blind in both eye's :ROTF: what a plonker :rofl:Quote:
Originally Posted by FlawleZ
Thanks for posting your benchies msimax! Looks like you and Jiu-JitsuGOD can have some fun going back and forth once we get his rig back up and running.
all updated
not till i get another psu i had to turn off all fans uplug cdroms disable everything in the bios and by the time the multi core test came i turned off my water pump took me 5 hour so this is it :rofl: :ROTF:
http://i31.photobucket.com/albums/c3.../nuclearus.jpg
8748 marks for a stock system.
Weak score for a POS CPU. I doubt I'll keep it but here's about the best it could do.
http://img.photobucket.com/albums/v3...ron1802784.jpg
here you go ;)
http://www.xtremesystems.org/forums/...1&d=1189648008
Here's mine, nothing amazing, any higher oc and system is unstable...fiddling to try and increase still though :P
I got a new Q6600 GO from the egg, TN. warehouse, batch L726A840, 1.325vid, pack date 8/14/07, here's a run two hours after install. More tuning needed.
Attachment 64331
New run:
http://img527.imageshack.us/img527/6876/9943ke3.th.jpg
9943
heres mine-
http://img.techpowerup.org/070919/nuclearus.jpg
22300 @ 1.51 Vcore
http://img521.imageshack.us/img521/1...ear4145wn2.jpg
Water 20* ambient
Heres mine E2160 @ 3474Mhz
Hey Folks..
As mAJORD did, I posted this in F3 OC Thread. So I figure I cross post it over here. So here is my score: 10319 :)
http://www.ironmods.com/ForumImages/...ore_10319b.jpg
Please put it under "TiTON" :) that is my HWBot nic.. just want to make it consistent :)
Ton
Grrr, can't quite break 10k....getting closer though :yepp: :D
WOW AMD @3300mhz with 206 bus is faster then C2D 4mb @ 4200mhz and 520 bus?!?! I'm I missing something:confused:
Q6700 - 17085
Could you make that any blurrier.:shocked: :welcome:Quote:
Originally Posted by brewer265
it was my first time trying to post an image .not really sure how to capture image. :shrug:
Press the PrtScn (print screen) key on your keyboard to copy the whole screen or press Alt and print screen at the same time to only capture the active window, then open paint (in windows accessories) click edit at the top then click paste in the drop down menu. The image will now be on the screen in paint. Click file then save as, pick jpeg in the drop down, you can title your image if you'd like. Then save the file (it will be in pictures) when you want to ad an image on the forum use the [post reply] tab and you will have the option to upload an image. More information on the subject can be found on your favorite search engine. If you can't figure it out on your own someone here will help you.
Here's my latest, should get me 5th overall :D
thanks for the info ,dengyong. much appreciated
Yeah, he's running a dual processor system (FX-74's) :DQuote:
Originally Posted by DStealth
Nuc. says quattro core when it's two dual cores. Note cpuz hasn't shaded the processor selection box at the bottom :D
Quote:
Originally Posted by brewer265
Yeah... that's like the most un-readable image I've ever, EVER seen! :DQuote:
Originally Posted by dengyong
Do like the other guy says... use the "prnt scrn" key and mspaint or some other imaging software and paste :)
somebody wants to start a war :ROTF: nice scoreQuote:
Originally Posted by Jiu-jitsuGOD
hows this pic? score 17246
Much better but try the alt print screen for a single image and it will only show the active window without the desktop.
here is my bench...it reports my cpu speed incorrectly...my signature has the correct info:
needed 3907 for over 2000 :p:
Quote:
Originally Posted by msimax
lol I only have a pea shooter left in the tank :rofl: .....
Intel Core 2 Quad Q6600 @4102mhz (455x9) WC
Swiftech APOGEE GT
Swiftech MCR320 Quiet Power Water Cooling Radiator
Alphacool CoolPump CP 1510
Asus P5K Premium
2GB Crucial Tracer 8500@1138 5-5-5-18
Score: 22009 mark
http://img256.imageshack.us/img256/2...leonpg4.th.jpg
man if i wasn't such a fan boy id have a intel quad with those score...Please kill me with a knife.. Kill me with a :banana::banana::banana::banana:ing knife..
ncsa - Intel P4 631 @ 5.550 Ghz - 6,971
ncsa - Q6600 @ 4.428 Ghz - 23,777
All run on Abit IP35-Pro / GeIL PC2-6400 modules :D
9443, spec in sig
http://img.photobucket.com/albums/v2...clearusrun.jpg
Why is Mandelbrot's eating my CPU? is it the benchmark or the smaller L2 cache?
I saw a Q6600 on here with he same issue...what's the deal with this?
better break out the pea shooter :rofl: :ROTF:Quote:
Originally Posted by Jiu-jitsuGOD
http://img222.imageshack.us/img222/6550/71476100gc8.png
Nice score msimax. Good to see you guys trading blows and climbing up the ladder with your AMD rigs.
Here is my score, don't think I'll push my PC harder, I'm happy with that setup and that speed :)
My Q6600 G0 @ 3583 Mhz
Got a bit better score. Will try for more later.
http://img175.imageshack.us/img175/3918/nucrf7.jpg
By blindfitter
P5K3 Q6600 Super Talent DDR3 1600c7
THIS THREAD WILL NO LONGER BE UPDATED UNTIL PERKHAM DECIDES HE IS MAN ENOUGH TO APPOLOGISE FOR HIS UNJUSTIFIED HARRASMENT OF ME ON THIS FORUM.
I'M SORRY FOR ANY INCONVENIENCE CAUSED BUT I AM UNABLE TO UPDATE THIS THREAD WHEN I'M FREQUENTLY BANNED FOR NO REASON. THE BACKLOG CREATED IS JUST TOO GREAT.
Why was/is Soldner banned then?
2nd that... why?Quote:
Originally Posted by KTE
:(
so sad
It's always the ones that harass people online that are absolutely the biggest weirdos in person.
:fight:
IDK but i always remember Soldner making a lot of fanboy comments and flaming people.
two sides to every story....that's all I'm saying :(
Phenom 9500 @ 246x11 (2706mhz) & DDR2 7??mhz (4,4,4,12,2t)
11,999