Printable View
This is a system we build for a friend, Lian li pc70, watercooled an modded x800pro@xt pe@ 680/600mhz (gpu/mem) and a custom phase change system with a custom controller, far superior to a vapochill ls chillcontrol.
http://fotos.miarroba.com/fotos/f/9/f997c62a.jpg http://img185.exs.cx/img185/5922/dsc037325lc.jpg
http://fotos.miarroba.com/fotos/2/7/27f829aa.jpg
Where'd you get that mounting kit? DIY?
Quote:
Originally Posted by gkiing
Nope not vapochilles. 100% custom made running r22.. And its surprisingly not as crampped as it looks, that Lian Li is one big nice case :D
This is one of our enclosures, chilly used them sometime ago.Quote:
Originally Posted by gkiing
Need to do some cosmetic lighting/stickers, but here's a triple evap rig, an ultimate phase-change SLI gaming demo unit:
http://www.vr-zone.com.sg/Shamino/sliphase/12.JPG
http://www.vr-zone.com.sg/Shamino/sliphase/11.jpg
lol that's kewl. 1/4" plexi?
hey sham, did what legths and ID of cap tube did u use?
How did you get the polished edges on the plexi. walt
for the dual evaps about 1.8m of 0.031, didnt want it too cold as this will be an exhibit unit running SLI cards whole days and can't have too huge insulation on the cards.Quote:
Originally Posted by blinky
the base is thicker than that, while the covers are just a bit thinner.
Where will the unit be exhibitted? it looks really good and professional if its close i mite go see it in person.Quote:
Originally Posted by LardArse
Heh thx, it should be sitting in a computer shop here in Singapore
Thats about halfway around the world either way east or west, so I think I will have to do with just pictures. :(
WOW superb work there.. What hp rating are the compressors and what gass you using in them?
gj lardarse dude !
so simple and clean.
cpu cap tube ? temp ? load ?
wow looks sweet, hope we see some pictures of it all lit up and in action
Kick arse shamino! What case is that? And for a ghetto insulation/hold down on the CPU its pretty professional looking :D
Well this is not a crazy benching rig so I picked 2 1/6hp small compressors and used R22/R290Quote:
Originally Posted by Eradicator
The cpu should do about -20c on load and the GPU about -10c to -5c on load.
those are big for 1/6 ive seen 1/3hp compressors that big
I think that is one of the coolest things I have ever seen. :) Great job man!Quote:
Originally Posted by LardArse
Alrightie fellas, here's the updated look!
http://www.vr-zone.com.sg/Shamino/sliphase/13.jpg
http://www.vr-zone.com.sg/Shamino/sliphase/14.jpg
From behind
http://www.vr-zone.com.sg/Shamino/sliphase/17.jpg
http://www.vr-zone.com.sg/Shamino/sliphase/15.jpg
http://www.vr-zone.com.sg/Shamino/sliphase/16.jpg
Now I'm just waiting for some nice stickers which will be ready by Friday, that will be the final touch-up
:hm: :shocked:
very nice display there. does it for me
That looks great LardArse!!
Just out of curiosity. Did you bring the evaps for the GPU's from the right side because it was easier or just personal preference?
Hi it was so that the "snakes" dont block the view of those cool hardware :D
Thanks for your reply!Quote:
Originally Posted by LardArse
I'm thinking of setting up something like what you have there, but instead of bringing them from the right I was thinking of setting them up on the far left (to the back of the case).
I just wanted to know if it was not a good idea to put them there or if there was something that I hadn't thought of yet that would kill my plans.
Anyways, I think they look cool were you put them. I might just have to go back to the drawing board.:)
Thanks for the info :toast:
That would works as well just remember to L bend it to clear any caps from the sides.
Nice work LardArse.. Very clean and more lights plz! :slobber:
how are the and phase change units and cathodes powered?
Wow! I was kinda planning going that way for a rig... How big should the evaps be for an sli rig? I'd think the evaps may clash onto each other into the graphics card.
could i use and hydralic tuba for suction? will it get much stiff when cold down ?
If the tube has a metal core, you should be ok. If it is rubber lined then you may have problems with refrigerant diffusing through the rubber lining
Hey LardArse, would you be able to post pic of a direct frontal view of the rig? is that case a Coolermaster Wavemaster? Ive actually been planning that design out for my (non sli) rig and was planning on getting that case if that's the one i think it is anyway. curious to see what it all looks like from the front, even if its not the case im thinking of.
anyways, if you can that'd be great :toast:
Sneil, looks like a stacker :D
nope not a stacker, stacker is way bigger then that caseQuote:
Originally Posted by dward3
Sneil its a nice coolermaster cavalier...
http://www.vr-zone.com.sg/Shamino/sliphase/12.JPGQuote:
Originally Posted by LardArse
LardArse,
Were you able to get equal gas to each evap on your video cards? If so, how? Just making the cap tube the same length? Do they both produce the same temps? That is the problem I keep running into and I'm now considering installing a CPEV. How about the same issue only with the cpu evap? How did you regulate it? Thanks ...very nice rig! :D
The lower one would tend to get a bit more for some reason... easy way is to run shorter cap tubes, flood em nicely, get ample of refrigerant going, then it wouldnt be an issue but of course, no vaccuumic low temps.
Thanks for the heads up.. Its a cavalier.. :slobber:Quote:
Originally Posted by odb
Another one of my projects..
http://i3.photobucket.com/albums/y85/Zorkman/bored.jpg
http://i3.photobucket.com/albums/y85...n/IMAG0068.jpg
1/5th hp med temp tecumseh, homemade evap, running R22,YY-Cube case.
What kind of temps do you see with r22?Quote:
Originally Posted by Eradicator
VERY nice! Extremely compact.
Is the compressor far enough away from the backside of the mobo to prevent your mobo from absorbing dissapated heat from the compressor?
The compressor doesnt seem to transer any of the heat, Its close to a half inch from the plate the mobo sits on, and the mobo is on standard case mounts from the mobo tray, The mother board tray doesnt seem to absorb any of the heat.. As far as temps go, I didnt bother with a temp probe on the evap, but speedfan using the motherboard sensor with my winnie 3000+ at 2850mhz @ 1.710v priming It shows around -20C full load and idles below -30C (board sensor goes wacky past that and reads -98C). The compressor Is nothing fantastic, but it was free and i threw this project together from start to finish in one day, so Im happy with it.. Also those temps are via the mobo so we all know that they are probably no where near accurate, if even close..
Duel chilly1 head action wooohooooo
http://www.extremeprometeia.com/PICS/spitfire/4.jpg
nice, i want a dual head one too :(
very xtreme coooooling :clap:
Awesome!!
damn thats pretty sweet looking, whats the hieght on that rig?
lol, dun look very user frendly ... tho if i had sumthin that big ... i would still atke it to my frends houses evonce in a while ... just to run up their electricity bill for the nite :)
whoa...in the last pic there are 2 condensers in the bottom unit, while in the first 2 pics there's only 1..what's with that?
I added another to improve capacity as the condensors are really small for dual evapQuote:
Originally Posted by Aphex_Tom_9
ah, i thought those looked small...Quote:
Originally Posted by LardArse
dont look like it will use that much that much electricity, maybe 1/2KW/h?
That's an amazing looking rig, I mean just ridiculous.Quote:
Originally Posted by LardArse
But LardArse, I've never seen a good explanation of how you guys are getting past the cold throttle issue on those 6800s. :confused: :confused: :confused:
There are none at all on the ultra pci express models.Quote:
Originally Posted by uclajd
there are cold throt issues for some GT pciexpress models though.
...Quote:
Originally Posted by TheDude
1st post here :) Heres some pics of the new rig im working on
http://img.photobucket.com/albums/v4...8/DSC00103.jpg
http://img.photobucket.com/albums/v4...8/DSC00102.jpg
http://img.photobucket.com/albums/v4...8/DSC00107.jpg
http://img.photobucket.com/albums/v4...Picture375.jpg
http://img.photobucket.com/albums/v4...Picture376.jpg
grats on the new rigs..looks like everyone is hanging out with their wang out!
http://server2.uploadit.org/files/Marvt74-DSC00927.JPG
Belongs in here to i guess
And
http://server3.uploadit.org/files/Marvt74-DSC00924.JPG
yo thedude, the only reason why equal cap lengths dont work sometimes is... the filter/drier.... different angles of tilt would cause different amounts of vapour and liquid to go into each cap tube. So either its one striaght 90 degree down , or tilt the filter around a bit at diff angles to get the evaps to frost up equally fast :DQuote:
Originally Posted by TheDude
Thanks man....I never thought of that.
my current projects, been busy.
cascade r290/1150 cpu
autocascade r290/1150 gpu
dual evap r290 cpu/gpu
http://www.xtremesystems.org/forums/...id=34510&stc=1
good work Kayl, but we want pics :D :fact:
and what pics would you likeQuote:
Originally Posted by Jack
Other than a little red cross? ;) (http://www.xtremesystems.org/forums/...id=34510&stc=1 doesn't work)Quote:
Originally Posted by kayl
some general pics of the whole build would be nice :)Quote:
Originally Posted by kayl
dont want to clog it up too much so just add links to project builds.Quote:
Originally Posted by Jack
dual evap system
cascade
autocascade
nice, but, whats with all the extra insulated suction line on top of the compressor? (maybe I missed something ^_^ )
i think this insulation is useless , or drop down the performance if it is what i think . In there u neen 2 exchange with house temp not insulate .
Thanx for my outstanding English . :hehe:
It's heat exchanger :DQuote:
Originally Posted by Bergo
HX o_O I see one compressor, or is it an autocascade or something, lol, pardon my noobishness :P
It's a kind of heavy subcooling before liquid will go to cpev ;). And it works.. propably ^^
It's a single-stage with heat exchanger :cool:Quote:
Originally Posted by Bergo
The new look of the unit.
a black version very soon :)
http://www.xtremesystems.org/forums/...id=35155&stc=1
http://www.xtremesystems.org/forums/...id=35156&stc=1
very nice. looks very professional! how did you make that case btw?
My previously setup of phase change's. :cool: Vapochill PE stand-alone to left och Mach1 R507 to right. ;) But I have sold the Mach1 and building a own singel stage system instead. :)
http://upl.silentwhisper.net/uplfold...d2/1zightx.JPG
http://upl.silentwhisper.net/uplfold...d2/2zightx.JPG
Ssilencer @ Extreme piece of Art !!!
Ssilencer. I'm crazy about that case. looks awesome!
Here's my rid. :D
I machined the Mach Lian Li casing to match, including the rivets. Also added lighting.
http://www.xtremesystems.org/forums/...id=35311&stc=1
My black version.
Thanks man!Quote:
Originally Posted by Athens[2004]
Sustain
Thanks to you too!
The Byter - How much will cost that EMP K2 ? :p:
The first units go @ 690$ before shipping :)
Our last unit, the MCT IV
http://img54.imageshack.us/img54/6963/mctszw11uu5gy.jpg
http://img389.imageshack.us/img389/3...2medium3zj.jpg
your unit is in good place here, looking forward to the next one ;)
Thanks Jort :up:
WOW Ssilencer!!! You've done an amazing job! That is the most awesome case I've ever seen!! damn!!
Thats a really beautiful case! ;) :banana:
Keep it up like this! :D
We are in the next stage, we are designing an entire phase change Computer case, with our single unit+ G-Froster controller inside obviously, there would be a limited edition, so the guys that buy them, will have an unique unit in the world... more info on this later.
cool rig ssilencer
Nothing special, just Vapo LS+Chieftech Case (im going to buy a new one, blue&silver colors dont match as you can see :( Lian Li PC-V1100 is my next choise )
config in my sig
http://www.xtremesystems.org/forums/...id=37226&stc=1
Just a simple Mach II GT with no mods other than wire sleeving. This was my first rig with anything but air and it was a challenge! The next one will definitely by some sort of custom phase change but one step at a time.
More here
http://www.hypernexussolutions.com/cinoxen/pc/23.jpg
http://www.hypernexussolutions.com/cinoxen/pc/18.jpg
http://www.hypernexussolutions.com/cinoxen/pc/24.jpg
are those integrated speakers?
are those integrated speakers?
cool Rig!!
i think it's fans behind some dust mesh filters