slowly working my way up.
http://www.abload.de/thumb/prime9tty.jpg
3720MHz@1.536v in cpu-z although it´s set to 1.4875v in bios. m3a79-t overvolts like crazy :eek:
cpu-z jumps between 1.52 and 1.536v
2640MHz NB
480MHz RAM
Printable View
slowly working my way up.
http://www.abload.de/thumb/prime9tty.jpg
3720MHz@1.536v in cpu-z although it´s set to 1.4875v in bios. m3a79-t overvolts like crazy :eek:
cpu-z jumps between 1.52 and 1.536v
2640MHz NB
480MHz RAM
Here is my first try, it would be nice if I could upload more than a 200kb file :shrug:
Cpuz
Thought I would do a OCCT stable test. Might not have needed some much V's but just thought I'd start there. Anyone know where the lil graph image that pops up is stored by default? I closed it and can't find it.
Edit: I found it, I am dumb.
*Phenom II x4 940 (CACVC AC 0850BPMW) @ 3.913/ 1800HT/ 1800NB/ 533 (1066)
*M3A79-T
*H20 220 Apogee Kit
*2x 2GB OCZ Reaper HPC 1066mhz
http://3800z24.info/Phenom/Deneb/XP3...17h30-CPU4.JPG
http://3800z24.info/Phenom/Deneb/XP3...17h30-CPU1.JPG
http://3800z24.info/Phenom/Deneb/XP3...17h30-CPU2.JPG
http://3800z24.info/Phenom/Deneb/XP3...17h30-CPU3.JPG
http://3800z24.info/Phenom/Deneb/XP3...cct_stable.JPG
I got some bad news....I REALY HATE Heatpipes :( , the work very very bad if the gets to cold. -20c did make them get hot after sometime so i could not bench and maek more scores with 3dmark and more.
Mainboard and cpu with coler gets to window with -20c outdoor temp... temps looks fine in bios +10c on core...geting in to windows around +20c core temp geting lower aftersome idling +16c, crash @ 4.3ghz super pi1m rebooting going into bios give some more vcore not much still lower than 1.63v..board booting and the crash before load into windows....and then no post.. reseting bios geting into bios temp is 50c?! with stock voltage... loading my 24/7 settings and save and repost and going into bios temps geting 50c+ on core...grrrr cant they make and good coler without the stupid heatpipes :(
This is screens from yesterday outdoor temp was about -9c that worked fine. I´m giving up max clocks now and waiting for my True Black so a can make a desents 3Dmark2006 runs.
4466mhz = windows looked and i took picture with Ixus.
http://www.bandwidth.se/imgs/nouser/446617ba6fc07.jpg
http://www.bandwidth.se/imgs/nouser/4263mhz8e3bdda8.jpg
Here my highest 920 OC: http://valid.canardpc.com/show_oc.php?id=496963 i only need to figure out how to get it bench stable. This validation was done with 1.55v.
Use IMAGEBAM to host your pics - http://www.imagebam.com/
Then post the thumbnails and people can click to see your full screenshot.
It free to use, needs no registration and doesn't fire gummo adverts at you like IMAGESHAT, sorry IMAGESHACK does :)
IMAGESHAT LOL good one.
@Lastviking
Nice Pi score on AIR :clap:
You beat me so quick!
Now I need to do most of 0C temperature outside and try to reclaim it back ...
You can add my name to the suicide group :) ......prime session comming soon
CPU - 940 BE
Stepping - 0849DPAW
CPU frequency - 4200MHz
CPU Vcore - 1,57
NB Frequency - 2043MHz
HT Link Frequency - 2043MHz
Memory Frequency - 908MHz
Memory Configuration - 2x2GB Ganged
Mainboard Model - DFI DK 790FXB-M2RSH
Cooling Type - Water cooling (cold water)
Windows Version - Vista32
CPU-Z to back it up - http://valid.canardpc.com/show_oc.php?id=484757
I see people post their SPi times here as well, here is my, not as quick as Lastviking, but close enought
Looks like everyone likes running superpi...........Maybe we should set up a list so we can post our scores. I mean everyone is throwing them in anyway and its one of the stronger reasons to push your cpu in this thread.......for a faster result right? Its especially useful with suicide runs......no holds barred.
Likewise Alot of people I am watching can't beat a time, so they up the clocks to beat someone else, that tosses the whole proportion out the window, a good thread to see performance optimizations would be a like a 3.6g challenge to see who can get the lowest when limited to a specific clock speed, Otherwise I will just go ln2 and mop the floor :D
I like 32m, that eliminates suiciders from the mix ;) I think I also hold one of the best times or the best on air so far. This was with shoddy D9 as well, Shoddy as in it died the next day, now i know why the timings weren't that great.
http://members.cox.net/nfridenti/performance2.jpg
well I like it its fun to run and relatively quick
no ln2 allowed.........water and air only......ln2 is extreme thats what the extreme overclocking section is for or even extreme benchmarking or extreme cooling:p: LN2 people like to come to the regular section when they cant hang with the -260c crowd :rofl::ROTF::D.........they dont have anyone to show off to except people on water and air lol
Suicide run I don't think I've posted, this was 3dmark stable as well.
940 BE cacvc ac 0850bpdw
Vapochill
http://img49.imageshack.us/img49/4152/43pilk3.jpg
No you can't see my crappy ram timings :shakes:
Uhmm interesting to see that all high oc's come from motherboards that are not from DFi :S. Looks like a bug ? Or whats going on ?
^^ indeed it was DFi
It cold-booted at -242c aswell :)
Guys.
It is possible to resize pictures. Please learn how to do it, or post links to various "spamsites" where you find it useful to store your pictures. :)
And "Krjalone", it is only one common sensor for "coretemp" for Phenom. No point in pos(t)ing 4 laaaarge images for the same thing.
Here is my latest status with my new X4 940. This will be my 24/7-setting.
Asus M3A78-EM
Phenom-II X4 940 @ 200x18
2x1GB Kingston HyperX DDR2-800
Club3D HD3870