http://service.futuremark.com/compare?3dm05=1633876
VGPU 1.73v
VDD Stock
Watercooling CPU + GPU
Catalyst 5.13
http://users.skynet.be/pt1t/x800/3dmar05_8128.PNG
Printable View
http://service.futuremark.com/compare?3dm05=1633876
VGPU 1.73v
VDD Stock
Watercooling CPU + GPU
Catalyst 5.13
http://users.skynet.be/pt1t/x800/3dmar05_8128.PNG
these cards still unlocking?
Very nice score Pt1t :clap:
Bah, I need better memory on my GTO.
Its a pitty that My GTO craps out at 660. does 660 at 1.6VGPU, but even 1.75 VGPU doesnt help it one bit.
Whats safe 24/7 on water? I'm assuming 1.7 v should be fine (after droop)....
I'd stick with 1.6v. 1.7 will decrease the life of the chip to levels in which it might die/reduce overclock by the time you want to get a new video card.
Also the gains from 1.6v to 1.7v are superficial at best and will NOT be noticed in every day use.
TBH, I run at 1.49v everyday to keep the temps and wattage down. No sense in pushing it to the max for every day use. Infact, in windows I underclock the gpu significicantly to reduce power usage.
so... are they still unlocking? :stick: or should I get something like this:
http://www.newegg.com/Product/Produc...82E16814102613
next week i hope to get my card back en get go , withe the card on ln² aiming @ 9k 3d05:p:
That is an amazing score, ceep up the god work!Quote:
Originally Posted by Pt1t
Have you flashed your GTO2 with a X850Xt Bios?
I still use the moded GTO2 Bios, and I run it @ 648/648
but still "only'' score 7600 in 3D2005. I wonder what
you have done wright or I have done wrong, any ideas?
Little update .
Vgpu 1.75v
Vddr stock (i can bench @ 651mhz for the ddr3 but not with timming tweak , and it does only ~8030pts )
http://users.skynet.be/pt1t/3d2k5/system.jpg
http://users.skynet.be/pt1t/3d2k5/2k5_8191.PNG
http://service.futuremark.com/compare?3dm05=1647501
No it s an X800 gto² 16pp bios.Quote:
Originally Posted by jackea
nice score Pt1t , vryday my card is back from modding .
hope it will do beter now , if i can get the rdx200 working
My C3D GTO flashed no problems...
God a weird thing going on though, this thing i have had up to 525 core so far no problems, stock cooler was holding me back at like 60c though.
So i put on my zalmann VF700, and temps go WAY up, like 120c loaded, but core still clocks fine, ive checked contact twice, its perfect, the core leaves an imprint on my zalmann. Now, i would just ignore the high temps and keep clocking, but i think the cards got a saftey mechanism of some sort and it shuts off my pc if it runs that hot for over a minute.
is there something i dont know?
Full Air (inside 2/3° ) , no vmod , cooling stock :)
http://www.membres.lycos.fr/boblemag...05/7282pts.jpg
Well ive found my stock max's in ATItool 0.24. Core:627 and Mem:634 i have the ati silencer by the way and my temps are 50/38 in artifact testing at 600/600 for 60min no errors found..is this long enough to get a good idea on the stablility of these settings?.
When i say stock i mean it hasnt been flashed to 16p yet. Im not to sure as to what i should run my vid card at 24/7 i wanna keep it for atleast!! 1 1/2 years.
Do you guys thnk 600/600 is safe? and will my max OC/temps get higher after the flash to 16p?
Just out of curiosity, did anyone's die yet? :D
that doesnt impress me, i get 7650ish at 610/640 on the stock cooler (lemme add a smily as to not offend) :)Quote:
Originally Posted by The Stilt
hey guys,
anywone did a vmod on a connect 3d gto? i didn´t find one...
3D Gto is a regualr X800 PCIE. go to www.techpowerup for the guide.
hi, i allready looked there....
now i saw my gto has the pcbs & chips like x800xl & x850
Yes, u need the same guide, as for the X850 PCI-E. :)
yes, i did the pencil vdd mod yet, now with only 2,04v 570 is possible instead of 550
2,2V on Vdd and Vddq shot be the sweet spot. :)
with 2,13 i can run 3d mark @ 600 / 600
the vgpu mod doestn´t work, it gives me no more mhz :(
U messured the Vgpu?