Like the oil black. Though the intensity of the color concerns me a bit. How bad are the stains it leaves?
Printable View
Like the oil black. Though the intensity of the color concerns me a bit. How bad are the stains it leaves?
The stain is not to bad to be honest. Its like the UV deep purple and UV deep blue. If you change every 9 to 12 months you'll be fine as long as the PH balance is correct.
To mix your own with dye you will need the following.
8 drops of Deep Purple
10 to 15 drops of yellow
5 drops of UV clear Blue to 1 Ltr of fluid.
the only problem you will have is you'll only be able to order it though one of my re sellers as pre-mix now as we have problems sending things abroad in small shipments. We only send the dyes out world wide as the pre mixed liquids and Water costs to much. when your quote Ģ21.00 shipping for 3 bottles its time to say no.
If a re-seller doesn't have stock of that item ask them to get some in.
this is under testing atm. Had to change power supply out when photo was taken. New power supply should be here today.
http://i2.sqi.sh/s_1/3G3/dscf7591.jpg
as you can see there is a nice heat killer in there (thks http://www.specialtech.co.uk/ )
So we can test for brake down of this new fluid. Its slightly blue the fluid due to the fact of me previously testing blue dye in the rad and forgetting to flush it out pmsl. How ever it wont effect the performance of the fluid what so ever. :).
This is the new White HBN-70 High heat transfer fluid under testing. Other wise know as liquid white graphite that im developing.
Nice colour ! :clap:
i am digging the black and white. looking good man!
thks, tests are going very well with temps and ever thing but it going to need long term testing , lots of on and off testing and temp control testing ect ect
Couple more picture shots.
http://i2.sqi.sh/s_1/3Gy/dscf7602.jpg http://i2.sqi.sh/s_1/3Gy/xxx.jpg http://i2.sqi.sh/s_1/3Gy/dscf7613.jpg http://i2.sqi.sh/s_1/3Gy/dscf7626.jpg http://i2.sqi.sh/s_1/3Gy/dscf7615.jpg
This again is a cheap built test system for the new fluids.
HBN-70 White Graphite liquid get to go out for a few days
http://i2.sqi.sh/s_1/3J0/73693_10150..._6655069_n.jpg http://i2.sqi.sh/s_1/3J0/74890_10150...5_814314_n.jpg http://i2.sqi.sh/s_1/3J0/149690_1015..._1410519_n.jpg
Aqua Tuning testing the HBN-70 White Graphite Liquid to the max all so in there is the new unrealised Coke coloured dye ..... this is the first time HBN-70 White graphite has see the light of day and apparently its getting a good hammering by some hot chick.... down at the i41 lan party in the UK. Looking at the shot the hot chick aint phasing the liquids at all ;) .....
Allso here is a Vis of the liquid and how it looks after a few days of standing still and how well it mixes :) ..
http://www.youtube.com/watch?v=JWTDZK7Z9ow
Nice pics...lol
On another note, I remember a thread by you showing how to clean stains. I cant seem to find it anymore....
And how many drops of the dye do we need for a 1/2 liter loop. I tried with 4-5 drops, but the color was still a bit pink instead of red, since then have drained it to retry, although it still has a pinkish tint to it now..
Erm the guides are here mate - http://www.wcdyes.com/Shop/content/8-mixing-guideQuote:
Originally Posted by mav2000
I dont understand neither what colour are you making. If its UV red it will always have a Pinkish tone to it as UV red has UV pink in it. If its red alone then it should not be pink, if its UV pink well that again is a pink colour.
Guess what landed on my door step to day .. :) time to play ....
http://sphotos.ak.fbcdn.net/hphotos-..._4461606_n.jpg
http://sphotos.ak.fbcdn.net/hphotos-..._4437818_n.jpg
http://multimedia.3m.com/mws/mediawe...6EVs6E666666--
It will have to be put to the side for a few days though while i scrounge some extra cooling parts for the pc.
I have a stupid simple question.I already have primochill steel blue in my loop.And i want to add if posible some UV to my loop.So the questtion is easy:Can i add your colorants with no risk to the primochill?.thank you in advance.
to make it blue you can add UV clear blue into it with out any problems.
Boiling point is 49° Celsius. Isn't that a bit to low to use?Quote:
Originally Posted by mlwood37
Its fine for CPU usage depending on how well its can cope these are test samples to see how things goes. remember the thermal effect of these are very good in comparison to some products ..
Of course. It's made in Belgium. :DQuote:
Originally Posted by mlwood37
Yes it certainly is :) ...
www.wcdyes.com will no longer be selling the dyes or liquids though our shop you will need to use our resellers.
Our web page will soon be changing as well .
Our reseller page is here - http://www.wcdyes.com/Shop/content/6-resellers
If any other shops are interested in stocking our line of products please contacts us using the contact us form. We have only 1 more slot left for the UK.
I broke down my loop prior to installing a GPU and second rad. Inspection of the CPU block showed nothing but normal oxidation. Primochill tubes all seemed fine, with no difference between old and new tubes just added. Some minor residue at the water line of the res was the only thing I saw, and was probably not related to the biocide or UV clear blue dye. Good stuff!
Hey Mick Any new News about Nano Fluids ?
Hi guys just some new i know i haven't been around alot.
Im currently working now full time all over the Uk for a company (im spending alot if time in hotels) but have now taken on a employee whom im teaching every thing about water that i know. Any way Nano fluids are still under test and wont be out until testing is complete (white fluids any way) there are a few others as well under test. This all takes time and the tests we use are not simple 5 min jobs it takes me months to properly test them.
Ill no longer be supplying the public only resellers as i dont have the time to do small batch runs as such and am looking at having the web site changed when i can afford it. unless some one know so one who can do its cheaper and better lol ...
I cannot answer questions about free samples or making new colours as i dont have the time to do this. Most of the info can all ready be found in this treat or the tuts on my site.
Reviews well come on guys the most you'll pay is Ģ4.50 for a retail one ..... ive handed out enough in the past for free to supply 1/2 the community with hardly any feed back :0. I know the product works so does the public :) ... need i say more ....
Al lso just because the VAT in the UK has risen ill be keeping the prices the same but its upto the re seller to adjust there prices to match not me.
Any way happy new year guys and i wish you all the best for this new year.
If your local stockers doesn't have products get them to contact me though my site and get it in stock .. this is not a expensive product and wont cost them a arm and a leg. All so its not a item that will change every 5 min :) ...
Hey guys, i was wondering why there is nothing new in this thread and so i visit Micks Website and saw this:
Important announcement : 30/01/2011
Michael has been in a car crash and is in hospital at the moment. Mayhems dye will be closed until he is out. Sorry for any inconvenience this may cause.
http://www.wcdyes.com/Shop/
:( :eek:
All best wishes to Michael from here to the UK and i hope that he gets better very soon !!
is your keyboard defective ? just to write: thanks for the info, but there is already a thread informing about this :rolleyes:
*sigh*Quote:
Originally Posted by bundymania
I think I did just that without having to type a single thing. I didn't want anything to be taken "out of context" yet it was anyway.:shakes: Bundy, I don't hate you, just your review process. Can't we get along otherwise?
Like i said, itīs ok for me when you donīt like the way iīm testing, 98% of the users like the way how i and other testers in the EU make their reviews and so all is good ! For myself i donīt like some reviews from other testers, which are sure nice for some "freaks", but not readable for many "normal" users - i release my reviews in 20+ forums worldwide and there are always users which have some constructive comments and suggestions, or critics, which is ok and good ! But the difference between you and them is: they are typing in a friendly positive way and in a CONSTRUCTIVE style and not like a 6 year old kid, which has lost his teddybear. Just try to accept, that there are many testers, that are not testing the way you like it, but always typing the same comments is just boring and donīt needed. Other example: The product presentation (Res.) from cartago2202. He spent a lot of time in making the pics, to show some different type of backgrounds and watercolors. The only Reaction from you was a "rolleyes smiley" Why not typing "thanks for your work but i hate all from phobya" lol ....or just typing NOTHING at all !? " and that your favorite brands came from the US and youīre a brave patriotic us guy. Always a good tip is: make a test for yourself, or just some proper photos (not like the ones from your little Res. "review") and you will recognize, how many work and time it needs. And: We got it, that you prefer reviews with spectacular looking resultcharts which "surprisingly mostly came to the same results like other tests with "simple" charts. The other thing is, always when you see products from Phobya, or some other companies, which are based in Germany, it must be a red flag for you and we always can see comments from you where one is like the other...always in the same style. Thatīs nothing but spam and the companies donīt care about it, they are just amused. Nowadys even your favorite tester skinnee will test products from Phobya, he already has the Nova 1080 Extreme radiator and other products from Phobya for testing.
I want to send this via PN, but you donīt accept private mails :rolleyes: