Building a Sossaman rig?

Printable View

Show 100 post(s) from this thread on one page

03-18-2009, 04:05 PM
Lu523

I have a backplate that came with my Rocketfish case. It is labled as a Nocona mounting plate. It looks like the one from Performance PC's. If so looks like I am set for that.
03-18-2009, 05:57 PM
Bail_w

So i need CPU and Ram then i am all set. Anyone have the ram link in handy? Thanks
03-18-2009, 05:59 PM
Movieman

Quote:

Originally Posted by Bail_w

So i need CPU and Ram then i am all set. Anyone have the ram link in handy? Thanks

http://www.newegg.com/Product/Produc...82E16820134272

Quote:

Originally Posted by Lu523

I have a backplate that came with my Rocketfish case. It is labled as a Nocona mounting plate. It looks like the one from Performance PC's. If so looks like I am set for that.

yes, Rocketfish is Lian Li and their plate works fine. I have one in my Lian Li PC62 that came with my G70 case..

Quote:

Originally Posted by Jaco

Those X5270's are nowhere near 80w , I'm sure .
More around 65-70w

My E5450's are also rated 80w and that's quadcore.

And the X5482's are 150w..
Can't compare E's and X's..
I really do have to try those chips though..
10.5 multi..times say 440?..:)
03-18-2009, 06:42 PM
CaptMorgan

So here is my board,it's backend:D. Anyways my questions being- do I remove the plastic white strip and the existing metal brackets and insert the new backplate? Thus using the new backplate to attach the new heatsinks?

http://i30.photobucket.com/albums/c3.../random008.jpg

Thanks guys:cool:
03-18-2009, 06:47 PM
Movieman

Quote:

Originally Posted by CaptMorgan

So here is my board,it's backend:D. Anyways my questions being- do I remove the plastic white strip and the existing metal brackets and insert the new backplate? Thus using the new backplate to attach the new heatsinks?

http://i30.photobucket.com/albums/c3.../random008.jpg

Thanks guys:cool:

no..you got PM..
03-18-2009, 07:07 PM
Bail_w

Quote:

Originally Posted by CaptMorgan

So here is my board,it's backend:D. Anyways my questions being- do I remove the plastic white strip and the existing metal brackets and insert the new backplate? Thus using the new backplate to attach the new heatsinks?
Thanks guys:cool:

What i did was remove the orginal backplate then insert the white strip (from original backplate) on the new backplate.
03-18-2009, 07:09 PM
Movieman

Quote:

Originally Posted by Bail_w

What i did was remove the orginal backplate then insert the white strip (from original backplate) on the new backplate. Pretty sure this should be okay.

no//:D
03-18-2009, 07:10 PM
Bail_w

Quote:

Originally Posted by Movieman

no//:D

Why no? Or i should just attach the new backplate behind the original backplate?
03-18-2009, 07:50 PM
Movieman

Quote:

Originally Posted by gongo

Listen to Dave, the CEK springs are there for a reason. It keeps the pressure even across the socket ensuring proper contact between the heatsink and the cpu die. Leave the paper and the springs there, then screw down the heatsinks to the backplate.

In my case I didn't need a backplate because I'm using an Intel chassis that has stand offs in the right place.

Oh yeah, and it seems that the IO shield for the SE7520BD2 ought to work for this board, though I'm double-checking before I buy.

QFT^^^^
Let me know on the I/O plates as to how they work..
03-18-2009, 07:56 PM
Movieman

Quote:

Originally Posted by Bail_w

Why no? Or i should just attach the new backplate behind the original backplate?

Sorry, was on the phone.
Leave the board as it comes.
Leave the paper, it won't harm anything and these are low temp cpu's.. No fire hazzard.
I had one in a case with that paper there for months and no issues..
Now as to the Lian Li back plate two ways to go, easy or hard..
1) easy, put in behind board before putting board in case and just screw the heatsinks into it.
2) hard:
find and properly place that back plate to the motherboard tray and then mount with 4 tiny screws to motherboard tray using the two top and bottom offset holes..
I did this, takes time to properly set that piece.
Now way #1 is fine because the HS in question are light aluminum and when screwed to that backing plate distribute the weight so no issues.
Your choice on this.
03-19-2009, 03:09 AM
CaptMorgan

Quote:

Originally Posted by gongo

Just ordered the IO shield and some compatible memory. Now I'll have to sell off my old memory on eBay, what a pain...

Gongo you said you were having trouble with your memory-it was not the 2gb sticks was it?
03-19-2009, 05:32 AM
CaptMorgan

Good luck Gongo,hopefully the 2gb and 1gb sticks I got will not be a problem- I grabbed the ones you suggested from the selller on eBay. I am sure they will be oK and I have not taken them out of there bags yet. I am sure the Kingstons you ordered will work; and I understand the shedding situation- I have an always shedding German shepherd!!!
03-19-2009, 08:41 AM
Bail_w

Quote:

Originally Posted by gongo

Yeah, my 2gb single rank Elpidas... of the 8 sticks, only 2 work in this board. They worked fine with the Supermicro board, so I don't know what's going on.

I do have a cat (she's shedding and there's hair everywhere in my room because she likes to sleep on my bed) and the weekend that I was building Sammy2 I was sick so I was shuffling around the house in my thick socks... maybe I shocked some of the sticks in the process? :shrug:

I noticed on the Intel tested memory list that nearly all of the 2gb modules they tested are dual rank, which is kind of surprising seeing that the SE7520BD2 was tested with single ranked 2gb dimms. Maybe the OEMs didn't need it or care?

Anyway, once I get my memory (I ordered 4 sticks of KVR400D2S8R3/1GI, just to be safe) I'll ship my old sticks out to my brother to test in Sammy1 to make sure I didn't fry them. If they work, he'll keep them and if not then I guess I'll make keychains or something.

Just a little bummed that these sticks worked great in the X6DLP-EG2, but the SE7520BB2 doesn't like them. Maybe I'll try the freezer trick, see if it actually works...

I thought you said as long as the ram are label as "single rank" or 1rx4" then it should work with the intel board... Am i missing something here?
03-19-2009, 10:22 AM
WesM63

This is the stuff i'm using in sammy.2 and sammy.3. Works like a champ. Not 100% sure what the original Sammy has in it.

KVR800D2D8P5/1G

Yes, people say DDR2-800 stuff isn't supposed to work (or work correctly), but it does and I've not had any problems.
03-19-2009, 11:29 AM
Movieman

Quote:

Originally Posted by WesM63

This is the stuff i'm using in sammy.2 and sammy.3. Works like a champ. Not 100% sure what the original Sammy has in it.

KVR800D2D8P5/1G

Yes, people say DDR2-800 stuff isn't supposed to work (or work correctly), but it does and I've not had any problems.

When you get back to home this weekend can you toss up a cpuz shot of that showing the memory tabs?
03-19-2009, 11:49 AM
WesM63

Quote:

Originally Posted by Movieman

When you get back to home this weekend can you toss up a cpuz shot of that showing the memory tabs?

Yep, Will do.
03-19-2009, 12:02 PM
Movieman

Quote:

Originally Posted by WesM63

Yep, Will do.

Thanks pal!:up:
i've been out making inquiries on these unseen Merom MP's and it seems they did or do exist but no one and I mean no one has ever seen one..
It's a mental exercise for me at this point to try and track down a pair..
03-19-2009, 01:15 PM
WesM63

Here you go...

http://www.needmoreboost.com/wes/sammy800.jpg
03-19-2009, 01:23 PM
CaptMorgan

Micron 4GB (2 x 2GB) DDR2 REG ECC 1Rx4 PC2-3200R Memory

MICRON

2 x 2GB DIMMs (4GB Total)

DDR2-400

240 pins

Registered with ECC

1Rx4 PC2-3200R

Excellent Condition/Matched Pair/ Server / Workstation Memory
__________________________________________________ ___
Micron 2GB (2 x 1GB) DDR2 REG ECC 1Rx4 PC2-3200R Memory

MICRON

2 x 1GB DIMMs (2GB Total)

DDR2-400

240 pins

Registered with ECC

1Rx4 PC2-3200R

Excellent Condition/Matched Pair/Server / Workstation Memory

This is the memory I grabbed for my sosssaman's- got 8 of each
03-19-2009, 02:08 PM
Jaco

Quote:

Originally Posted by WesM63

Here you go...

http://www.needmoreboost.com/wes/sammy800.jpg

Weird , SPD says 3-3-3-8.

But the board decides to use 4-3-3-13
03-19-2009, 03:49 PM
CaptMorgan

I figured it was ECC so it it would work- of course that train of thought might bite me in the face!!

Gongo I remember you said before that you had updated the bios- did you do that on top of what you did above. I plan on using linux and I am afraid to admit some of this will be uncharted territory for me :eek:
03-19-2009, 03:55 PM
Movieman

Quote:

Originally Posted by gongo

Yeah, but where do you get the microcode for them?

I find someone with a working system and buy the darned thing from them!:rofl: be back, fooood calling..
03-20-2009, 03:09 AM
Jaco

Does the Intel board work with only 1 cpu installed?

Most serverboards do , just asking to be sure.
03-20-2009, 03:11 AM
s0lid

Quote:

Originally Posted by Jaco

Does the Intel board work with only 1 cpu installed?

Most serverboards do , just asking to be sure.

If i remember correctly, Dave did test this with acceptable success. So i'd say yes it works.
03-20-2009, 08:55 AM
Bail_w

This ram will work right? :D

http://cgi.ebay.com/ws/eBayISAPI.dll...m=250389037351

Show 100 post(s) from this thread on one page