My reults with a 146 CABNE 0530APMW, on an unmodded Mach II GT.
http://members.aol.com/jonpaletta/clocks/25secpi.gif
http://members.aol.com/jonpaletta/clocks/8mpi.gif
http://members.aol.com/jonpaletta/clocks/32mpi.gif
Printable View
My reults with a 146 CABNE 0530APMW, on an unmodded Mach II GT.
http://members.aol.com/jonpaletta/clocks/25secpi.gif
http://members.aol.com/jonpaletta/clocks/8mpi.gif
http://members.aol.com/jonpaletta/clocks/32mpi.gif
This chip is stable at 2.9Ghz with 1.48v. The picture is at 2.8Ghz however with the exact same voltages it is stable at 2.9Ghz.
The chip is not stable at 3Ghz even with 1.55v. It will boot and crash in windows.
CABNE 0545 2.9Ghz 1.48v STABLE
http://img424.imageshack.us/img424/446/dd5ph.th.jpg
CAB2E 0545
Ok straight away i noticed this chip wasnt as good as the CABNE. It failed to boot at 2.9Ghz with 1.55v.
At the moment i am running prime with it at 2.8Ghz 1.55v. Its been running for the last 30min and is ok.
Ill try lower voltages and then see if its stable at 2.8Ghz.
*EDITED*
STABLE at 2.8Ghz with 1.48v :D
:toast:
This is the highest clock it can acheive with this voltage and cooling.
http://img204.imageshack.us/img204/8...31186dl.th.jpg
Opteron 146 CABYE 0540 APMW / Max Stable -> 3118 MHz @ 1.70V / Watercooling -> Full load @ 54°C
i hate you!Quote:
Originally Posted by Kesnel
nice clocks! :toast:
Guys I'm really confused and I have quite a few problems... bear with with me:
1) Neither CPU-Z nor Clockgen can read my memory clock when using the 140 divider... is this a bug? MemTest86 seems to think it's running 1:1 at 280Mhz (it's definately not!) Only 3DM'01 gets it right!
2) Related to this, it seems using the 140 divider automatically disables 1T for me and bandwidtch takes a massive hit (see Sandra). Is this a BIOS bug?
3) Apparently my memory is running at 194Mhz, but how is this possible?? 2800/194 = 14.43 and I thought A64 could only use integers as dividers... shouldn't it be using 2800/14 = 200Mhz?!
http://www.gandham.f2s.com/problemo1.JPG
Cheers,
Suman
Just loosened some subsidiary timings, twtr, etc. Not sure exactly what did it, though. Two days ago I couldn't run essentially the same settings, even at 2.5-3-3-7. Hell, it wouldn't even boot into Windows at 2.5-3-3-7 at a 2/3 multi, but would at 7/10. Basically, I just played around out of frustration and suddenly it worked -- wish I could tell you more, but there it is. Apparently Opterons are picky as hell about mem timings, not necessarily in normal ways.Quote:
Originally Posted by Martin Cracauer
Yep. Something that did at least 250 would be nice. But looking at those timings (now that I've got a stable config and can -- hopefully -- go back) do you see anything that you'd change?Quote:
Originally Posted by dogsx2
http://www.theinquirer.net/?article=28250 AMD stops production of Socket 939 Opterons OMFG:slapass:
Only the 14x and 16x models. The higher clocked variants don't seem to be affected.Quote:
Originally Posted by sponge bob
It says the 14x and 16x were quickly sold out, but when it comes to discontinued cpus it mentions:Quote:
Originally Posted by Martin Cracauer
It's time to save a few for the winter ;)Code:Stopped items from AMD for Q4
SDA2500BXBOX
SDA3100BXBOX
ADA3000BPBOX
ADA3200BPBOX
ADA3500BPBOX
939pin Opterons
Yep :)
Unless I am offered an obscene amount of money for my awesome 146 I will be keeping it in the family, same as my P4 1.8GHz @ 2.8GHz default Vcore :D
http://img265.imageshack.us/img265/573/319tj.th.jpg
AMD Opteron 148 0543FPMW
greets from Germany ;)
http://img489.imageshack.us/img489/3...06887jc.th.jpg
http://img31.imageshack.us/img31/3217/img06898ke.th.jpg
http://img462.imageshack.us/img462/3...06921tk.th.jpg
http://img190.imageshack.us/img190/3...06916ln.th.jpg
http://img500.imageshack.us/img500/3...06931up.th.jpg
http://img500.imageshack.us/img500/7...06947ar.th.jpg
:D
BIG THANKS TO HAMPUS :D
Remind me what your address is? :)Quote:
Originally Posted by TEDY
Quote:
Originally Posted by sponge bob
You know what? I bet AMD did this to clear out all the failed FX57 cores. They got rid of a bunch of "defective" chips and to us they are gold!
What about the dual cores? But that you say about the single cores may be right!Quote:
Originally Posted by dnottis
Anyone know what steppings Monarch is putting out for an OEM 170(or 165 or 175). I want to try to get a better clocker than the one I have. Just going to order another combo with a cheap mobo and keep the other processor for an encoder rig.
UK, today. CPUCity have 146 CACJE 0546 at 125 quid plus tax. One of them is mine. :)
I did have it on order at 97 plus tax... 25% increase, someone's sussed us out.
You´re quite welcome TEDY ;)
Ups yeah hampus is hich nick on MSN ;)
Guys : Wiker is a great guy he helped me getting 4 CABYE's from komplett.se ;)
A true XS fella :)
Mine 144 Opteron CABYE 0536GPMW results under a Prometeia Mach I:
http://valid.x86-secret.com/ccpuz.php?id=50852 http://img275.imageshack.us/img275/5...e4595ki.th.jpg
http://img456.imageshack.us/img456/1...titled49lc.jpg
And I have another one......... :D :D
http://img45.imageshack.us/img45/354...e4476ah.th.jpg
I never thought you would buy one and then you go and get four. You will have a lot of fun playing with them.:DQuote:
Originally Posted by TEDY
[QUOTE=ThorLite]Mine 144 Opteron CABYE 0536GPMW results under a Prometeia Mach I:
Looks good. Can you bench spi at that speed?
If i have time, work tomorrow + friend's party celebrating his 1st baby...geeze :)
[QUOTE=dogsx2]I can up to 3.28GHz run 1M but the cpu has coldbug and the memory controller doesnt want to play.So the max superpi with TCCD for now is this:Quote:
Originally Posted by ThorLite
http://img478.imageshack.us/img478/6...tled1mb7vp.jpg
And its not very good,the imc doesnt like cold ........ :banana: :slapass:
One day old, but I am liking what I am seeing so far :banana:
CPU: Opteron 146
Stepping: CAB2E 0540 FPMW
Overclocked speed: 2870 mhz
CPU voltage: 1.328 cpuz, 1.375 actual
Idle temp: 37C
Load temp: 50C
Cooling: Thermalright XP-90
Motherboard: DFI nF4 Ultra-D
Ram: G.Skill 2GBZX
Ram size: 2 x 1024 meg
Ram timings: 2.5-3-2-5-1T
Ram divider: 8:10, DDR478
Ram voltage: 2.7v
Pi32m: http://members.cox.net/mucker/GSkill/CAB2E3.jpg
OCCT: http://members.cox.net/mucker/GSkill/OCCTCAB2E1.jpg
m :)
my new opty 146, i received it three days ago:
I had bad temps with HS at stock vcore watercooled:
31° IDLE
45° FULL
naked now:
25° IDLE
30° FULL
mem dual 2*512 sync at 300MHz 2.5-4-3-5 1T at 2.85V
http://membres.lycos.fr/starostise/O...0mhz_1.45v.jpg
Just ordered a 148 OEM from monarch, what are my chances for what steppings? Think I'll hit 3.0 on my big typhoon? I did on my 146 CABYE 0540, but I sold that. Thanks.
Well I received my 148 from monarch today. It is a Cabye 0540fpbw, I received this from one that I had to RMA. So I dont know if you bought one today, you'd get this week. I was expecting a 0543 or so but this is what I got.
Your a luck person then.....:slapass:Quote:
Originally Posted by Exa.bit
:toast:
I kinda like my new cpu, dont know why :p:
http://www.onbegrijpeloos.nl/william...6-VoltCore.png
http://www.onbegrijpeloos.nl/william...6-CPUGraph.png
http://www.onbegrijpeloos.nl/william...e/cpu-3000.bmp
http://www.onbegrijpeloos.nl/william...098_xtreme.JPG
:toast: :clap: ChkDsk
Is that with Vcore set @ auto in bios ??
http://img204.imageshack.us/img204/1208/320ps.th.jpg
3DMark05 Results, but bad 2GB Ram...
http://img224.imageshack.us/img224/8033/3255ot.th.jpg
Link:
http://service.futuremark.com/compare?3dm05=1542466
Watercooled ;)
No, set to 1.425 in BIOS. But I don't really care :p: :toast: :banana:Quote:
Originally Posted by alpha0ne
Which is better, a CABYE 0540FPBW or a CABYE 0543FPBW? :stick:
Is your 7800 wc also? What kind of ram are you using?Quote:
Originally Posted by elh4jj4j
My opti cooled with a TT BT + 2800rpm fan. Cpu is a 146 0530APMW 0092.
http://i6.photobucket.com/albums/y237/BvK/Primeop2.jpg
http://i6.photobucket.com/albums/y237/BvK/1.jpg
http://i6.photobucket.com/albums/y237/BvK/blaat321.jpg
http://i6.photobucket.com/albums/y23...erpi32Mop3.jpg
I have that same cpu and it is a good one. Maybe the best I have.Quote:
Originally Posted by Exa.bit
Screw Opterons, where the heck do you get these background photos?
Digicam shots of your girlfriends?
Nice Clocks BvK and nice Bunnies too.lol
Ordered a 148 CACJE 0544 EPAW today,dont know how well it'll overclock,it's a replacement for my 144 BPMW (which is at 2.6)..the purpose being that i hope to get 3ghz out of her.Quote:
Originally Posted by szukalski
Cant find much info on these at all, but i'll post the results whether to see if she's a good un...or one to be avoided :) :p:
What's the AMD SP8M WR with AIR COOLING:confused:
Here is my Opt 146 CABYE 0540FPBW and lapped TT BT, it was semi cold out side (-3ºC):rolleyes:
http://koti.mbnet.fi/dani69/DFI%20nF...Nokia_9300.JPG
http://koti.mbnet.fi/dani69/DFI%20nF...BigTyphoon.JPG
http://koti.mbnet.fi/dani69/DFI%20nF..._1.64V_AIR.gif
CABYE 0540 FPBW :toast:Quote:
Originally Posted by Cybertronic
The wr is just a ss and what you showed isn't going to beat it. That said, you have a very good chip.Quote:
Originally Posted by Dani
Yes OCed to 540/1720, Ram is MT Micron 5BC, running 2T only, very bad Ram..Quote:
Originally Posted by dogsx2
You really need some good ram.:slap: :)Quote:
Originally Posted by elh4jj4j
I have tweaked an Opteron 144 CABNE 0540BPMW today and results are really poor.
OCCT max stable was 2588MHz at 1.78V :slobber: . The only good point is the temp which was 34°C in idle and only 48°C in full load! Anyway, I have tried to give it more volts but it failed to load windows with 1.80V.
http://img279.imageshack.us/img279/1...25883fr.th.jpg
That's too bad, I feel for you. 0540CABYE is good and 0540CABNE isn't.:(Quote:
Originally Posted by before
Week 40 is a shadow of week 30.
[QUOTE=overcrash86]my new CABNE 0530 APMW aircooled :
That chip looks familar, seem like I've seen it before.:D It's a good one.
Yes, I have one of those (and I bent 2 pins on it somehow). It is equally poor as yours; I have spent all afternoon trying to get stability at 2.5GHz on stock HSF; I've tweaked the RAM until it's sick of me and given vcore 1.52v so far but it still isn't happy. I thought it needed more volts, but 1.78?? :eek:Quote:
Originally Posted by before
Should have a 146 CACJE 0546 next week... hope it's better than this!
Where are the latest good steppings coming from? ZZF, Monarch, or Newegg? Retail or OEM?
Thanks
@BvK nice chip indeed :toast: Slowly working my way up [IMG]http://img470.imageshack.us/img470/8103/256606nf.th.jpg[/IMG] [IMG]http://img470.imageshack.us/img470/4...23138ve.th.jpg[/IMG]
As for now CABNE 0540BPMW is the worst stepp I've ever seen... CABGE chips are better :eek:Quote:
Originally Posted by stone_cold_Jimi
I hope CACJE 0546 will give better results. ;)
Quote:
Originally Posted by FlyBoyGeo
would like to know too. thinking about selling my 146 cabye fpaw, tops at 2.9
148 from ZZF is on the way, estimated delivery 12/12...
Hoping for a good stepping.
@overcrash86: Wow nice man. Where did you buy that stepping, must be pre-owned isn't it? :cool:
Your Ram is runnig awesome too man :slobber:
What memory is it @ what Volt?
Quote:
Originally Posted by gjwild
I ordered two, I fired the one that I was building for someone and it did 3gighz no problem w/ 1.55vcore. The 2nd one I will prolly have to ebay since the 2nd guy i was going to build a system for decided to go dual-core.
CAB2E 0545CPAW opteron 148 from ZZF.
Not bad for the price!
I've had a few people ask the specs-
It was just on a asus a8n-e that I built for a coworker. I tested it for 5 minutes before giving it to him, seemed stable, but you never know. The point of my post is that the 0545 CPAW doesnt seem like a bad chip.
it's an CABNE 0530 APMW from team japan :toast:Quote:
Originally Posted by UTF Nightmare
memory are 256Mo of Kingston BH5 and 256Mo Mushkin BH5 too at 3.8v so super PI can "only" bench at 289Mhz max with 15-16°C ambiant temp and same timings...
Told you I seen it before.:D You really got a good one!Quote:
Originally Posted by overcrash86
Hey all, going to be offering a trade in classifieds for an Opteron and/or X2 would like to know if anyone has a head's up on the stock at Newegg?
These are what I'm considering need your help. I really shy away from OEM, for obvious reasons, but if the chip's a dog at least I can exhange for another.
148 Venus 2.2/1MB Retail $249
150 Venus 2.4/1MB Retail $338
170 DC Denmark 2.0/2x1MB OEM $420
175 DC Denmark 2.2/2x1MB OEM $475
or
Athlon 64 X2 3800 2.0/2x512kb Retail $323
Athlon 64 X2 4200 2.2/2x512kb Retail $400
TIA
Hi, please I need help choosing the correct Opteron CPU and Memory, which would yee reccomend, would cab2e 0545 be any good, Thx
has anyone seen any results with a CABNE 0545 BPMW code?
From what I've read, we can expect them to be rubbish. I've got one :(
Unsure whether to RMA it to Scan(since they sent me OEM, after me paying for retail) in the hopes that it'll clock better or not, can't test it yet as I don't have the mobo to.
What 'You've read' was obviously about CABNE 0540BPMW. Yes they were very poor 144s, but 0545 146s do around 2900.Quote:
Originally Posted by specofdust
Oh, very sorry for the mistake. Sorry, I'm terribly newby to be posting here, anyway, great news for me, thanks for the info :D
any info about steppings of 148 OEMs from monarch?
No need to apologise so much. Easy mistake to make if you think that certain steppings perform the same regardless of week. Yeah, I've seen several CABNE 0545s do around 2900 stable. You have a pretty good chip, did you buy it from RL supplies by any chance?Quote:
Originally Posted by specofdust
Nope, Scan. They aparently had to hunt the country to find them, and paid £50 over selling price, but decided to do it to fullfill christmass orders. No testing till my mobo and graphics card arrive though. I shouldn't say this, but they're getting another batch of retail ones in mid-january, if anyone in the UK is intrested(that comes from their customer support person I spoke to).
Quote:
Originally Posted by ZX7891
148 OEM CAB2E 0545CPBW
got it yesterday... OEM from monarch ordered on 11/30/05
any results?
Get 'em while you can... http://www.theinquirer.net/?article=28250
7 hours of prime so far at 2893. Got it over 3 ghz and completed superpi 32m but couldn't pass occt. Air cooling. I am a novice at overclocking though.Quote:
Originally Posted by ZX7891
Well done :clap:Quote:
Originally Posted by Spring2188
Nothing to sneeze at
I could really use some help here please?Quote:
Originally Posted by Liquid3D
Either DC Opteron would be my choice, actually just ordered a retail 175 from Newegg lastnite.Quote:
Originally Posted by Liquid3D
Anyone have any experience of the CAB2E 0545 CPMW steppings?
i would like to know too because tomorrowi would have one to install on my rid since my X2 fry.
mine 0530 didn't like volts :slap:
http://wowgame.free.fr/Opteron%20144...02900Mhz-2.jpg
fully aircooled
The 0540 BPMW is what i have in my sys now,i still got a 850mhz overclock out of her,but in comparison to the 'FX silicon' ones it's quite poor,i've also ordered one from Scan and this time round it's a more obscure stepping OSA148DAA5BN CACJE 0544 EPAW,i think a few aussies and Kiwi's have these,and a member here ,szulaski (?),got 2850 from his 146,so if your 0545 doesnt cut it ,just send it back saying you paid for retail,and you could end up with the CACJE stepping with the replacement...which could be better worse.Cpu city have some more opty's in,these are the CACJE steppings,according to the admin there,these are getting 3.0-3.1 into windows,and 100% stable at 2.8-2.9.Quote:
Originally Posted by Theo404
Matt.:)
what about the CAB2E 0545 CPMW stepping? they any good?
On par with the CACJE's it seems,i dont think there will be any more 3gigs 144/146's with the ones that are in retail at the mo in the UK.
2950 tops with the 146's ,less with the 144's.
You could try Monarch or Tank guys,i think they'll send to the UK,and they still have good steppings. :)
EDIT: sorry,CAB2E's are slightly better i think,i misread the stepping you gave.
Well, as long as i get 2.8 GHz I'll be happy. Better than the ol' venice anyway :D. the venice i have right now cost £60 inc p&p of eBay and had 5 bent pins does 2.61 GHz at 1.53 V 24 hour prime stable as well. :p:
so I should go ahead with the CAB2E 0545 CPMW then it seems. What do you have yours at right now thebeast?
Read the above posts :)
i wont get my CACJE till mon/tues,but i'll give her a good going over. :D
WR opteron 144 :banana: :
http://valid.x86-secret.com/show_oc.php?id=56160
http://wowgame.free.fr/Opteron%20144...Z/cpu-3616.jpg
Impressive... but what's the maximum primestable and @ what voltage?Quote:
Originally Posted by overcrash86
No cold bug at all on your CPU? BTW - Congatulations! :up:Quote:
Originally Posted by overcrash86
What a clock! :toast:
thanks
no cold bug for the moment CPU is only at 11-12°c with a chiller :banana:
didn't tested the stability, but i think around 3300-3350Mhz with 1.5-1.52v...
Quote:
Originally Posted by K.I.T.T.
I got my 146 from RL Supplies exact same stepping does ....
2.8 @ 1.4v
2.9 @ 1.45v
3.06 @ 1.55 :toast:
EDITED... it must of been to hot last night because now at 305 - 3060 :woot:
Hi, please I need help choosing the correct Opteron CPU and Memory, which would yee reccomend, would cab2e 0545 be any good, Thx:confused: :confused:
as i posted above mine is running sweet and its on stock cooler :woot: :clap:Quote:
Originally Posted by killer_pav
Edit forgot using 2x512mb Corsair TwinX PC3200XLPT v1.2
WHICH ONE SHOULD I KEEP ?Quote:
Originally Posted by TEDY
Good question, but I have a better one. What are you going to do with the ones you don't keep? :p:
themeatfrog: you got good stepping ;)
3 of them already sold :)
Just got a CAB2E 0545 CPMW for £136 shipped!! :D :woot:
Hope its a good one :cool:
£129 picked up myself hope its like mine or better :toast:Quote:
Originally Posted by K.I.T.T.
Let's know! ;)Quote:
Originally Posted by K.I.T.T.
Quote:
Originally Posted by overcrash86
omg, thats nice ! :D
But 1.6V is still quite low, innit? ;)
Right... well,erm,never heard of that supplier before so i cancelled the CACJE from Scan and went with those guys,got me a 148 on the way,thanks for the heads up !!! :) :DQuote:
Originally Posted by stestan