Hey ben805 what stepping is your 3800? I would think that on phase that thing would scream. I am getting a Mach1 this week and am hoping to break 3ghz easy..
Printable View
Hey ben805 what stepping is your 3800? I would think that on phase that thing would scream. I am getting a Mach1 this week and am hoping to break 3ghz easy..
my X2 3800+:
ADA3800DAA5BV
CDBH 0527 TPBW
I suppose it's still not a bad chip as I'd gained 800mhz over stock speed, just that it sucks when compare to your 2.95 on air!! which bios you use to achieve that?
Yeah I lucked out with a decent chip! I have a CDBHE 0526UPBW I almost ended up with the same one as you but decided to take this one insted cuz of the week. I was using the 623-1 with my G.skill LE's but I just switched to the 704-2BT bios and put my OCZ CH-5's in. My chip seems to run much better with UTT CH BH-5 ram I dont know why. I tried sooo many different bios's but landed on this combo and it works great! I am getting a Mach1 this week so I am hoping to get over 3ghz~!Quote:
Originally Posted by ben805
Here is one i tested : http://sa3doc.co.za/article98
4400+ X2 Maybe E6???? YES! It is - SH9-E6 :D :D
http://benching.sa3doc.co.za/4400+x2/Cpu_Code.jpg
Check link above for more benches.
Will try with more volts over the weekend. But i'd rate it a dam good core for those kind of volts.
:cool:
I think the 704-2BT bios makes a big difference, on single core according to my testing there is an increased MB/s thruput shown in memtest 1.6, have you noticed this with your dual core njkid32 :)Quote:
Originally Posted by njkid32
I havent run memtest with the new bios but I will right now and see if there is any added bandwidth..Quote:
Originally Posted by alpha0ne
Edit: yeah its higher I was getting under 3000 at these speed before.
Glad it has helped :)Quote:
Originally Posted by njkid32
I get over 3200MB/s using my new G.Skill GH which is IMHO a VERY good number for ram that only costs $252AU :D
All the people with x2 amd ... please can you post your bios config ... all bios ... i am from portugal ... sorry my ingles ... i can do stabel oc ... on my x2 3800 ... step ccbwe 0525 xpmw ... if im not wrong ... on a dfi nf4 ultra-d ... gskill pc4400 LC 1gb ... with wc on cpu ... i can enter de windows ... with 280x10 ... not he even do de superpi 1m ... :S anyone can help me ? Im needing help ... iam going crazy ...
If anybody can help me in the msn iam thnaks ... --- leitao@hotmail.com
2.8ghz on water might not be possible on many X2s (especially 3800+)Quote:
Originally Posted by leita0
Lower it a tad bit to see where stabilities are at. Something like 2.7ghz might be prime stable.
jinu117 but i need help to stabalize him ... at 2.7 ghz ... and i don t know how ... i dont have my system stabel ... not even at 2400 mhz ... thats my problem ... if you have msn can u help me configurating my bios config ... ?? my mail is leitao@hotmail.com ...
P.S : i can oced him in win at 2.95 ghz ... i have a pic ... at 3 ghz he reboots ... :D i think this is in a certain away good ... i need help ...
Do you think i just got a bum chip? Or a config issue, i havent really played around in bios i guess that much. Ill try and run a divider and see what happens i guess.Quote:
Originally Posted by pentium777
People please post your bios config ... :S i can ` t config my bios well ... i have a 3800 x2 nf4 dfi ultra-d gskill pc4400 lc , and i can not pass prime even at 2200 mhz ... i think is something wrong with my bios config ... special in the memory zone ...
thanks
needding help :S pm please :S
Hey leita0 try these settings cuz I was told to use them with my G.skill 4400 LE'sQuote:
Originally Posted by leita0
HTT= 275
VID= 1.4v
VID SPECIAL= 113%
CHIPSET= 1.7V
LDT= 1.3V
LDT= 3X
CPC = Enabled
CAS Latency(CL) = 2.5
RAS to CAS(Trcd) = 3
Min RAS# Active time(Tras) = 7
Row Precharge Time(Trp) = 3
Row Cycle Time(Trc) = 9
Row Refresh Cycle Time(Trfc) = 17
Row to Row Delay(Trrd) = 2
Write Recovery Time(Twr) = 2
Write to Read Delay(Twtr) = 2
Read to Write Delay(Trwt) = 2
Refresh Period (Tref) = 3072
Write CAS Latency(Twcl) = 1
DRAM Bank Interleave = Enabled
Skew = AUTO
Skew Value = 0
DRAM Drive Strength = Level 8
DRAM Data Drive Strength = Level 1
DDRAM Response Time= Normal
Max Async Latency = 8ns
Read Preamble Time = 5.5ns
Idle Cycle Limit = 256
Dynamic Counter = Enabled
R/W Queue Bypass = 16x
Bypass Max = 7x
32 byte Granularity = Disable(4burst)
Very hard to say what are the stepping numbers on your chip? Is it retail?Quote:
Originally Posted by dsumanik
thank you i will try this tonight ... but i think my memory is broken ... because i leave the prime runing and after 4h30min he gave me a error :S this in default ... with load optimal defaults ... :S i don`t konw what to do ... but tonight i will try somethings ... thank you ... he see us tonight here :D
thank you very much njkid32 ... do you think you can talk to me in the msn ? my mail is leitao@hotmail.com ... thank you and thank you all for this great internacional forum :D
Awww crap...same one I have :(Quote:
my X2 3800+:
ADA3800DAA5BV
CDBH 0527 TPBW
Think I should run it back to the shop and see if I can swap it? Still havn't opened the box :P
Where did you get it from? It may not be the stepping.. I could always be a setting that is holding some people back.Quote:
Originally Posted by OperativeSix
Computer Builder's Warehouse, it's a somewhat small computer chain, only a few states have them. I called in asking if I could swap for an E6 revision but the guy seemed kind of blank about how to check that.
He did say if it was still in it's original, unopened package i'd have 30 days to bring it back and swap it without any restocking fee, but said that they hadn't gotten in any new 3800+'s since I had purchased mine, so i'd imagine they only have more of the same.
Hey man dont think that way. The day I went to Fry's Electronics they had a little tag in the case saying coming soon next to the 3800. Thanks to Robert over at OCForums told me to go there. So I then asked them to see if they had any and the guy looked at the case and says "UH its says coming soon" not to bright there. LOL So I asked him to check the comp and see just for S&G's. And sure enough they had a couple of them. So when I was at the counter getting my chip I asked for them to bring out a few of them so I can see the stepping. And girl looked at me like I was from another planet. So when she brought them out 1 out of the 4 was a week 26 all the others were week 27 TPAW. What I have leared in the OC'in game is to always get the earlier weeks so I picked the 0526UPBW and lucked out.Quote:
Originally Posted by OperativeSix
So go back to the place you got it at and see what other steppings they have. Any earlier week would be good or even a stepping you havent seen before. Take a run through this thread and see what steppings people have...
Good LucK!!!
http://www.xtremesystems.org/forums/...ad.php?t=65524
Well, I headed back there, looked at the 3800+ X2's they had, and found this little beauty:
APA3800DAA5CD
CCBWE0529TPMW
Looks like i'll be testing out an E6 very shortly, just finishing up some sleeving on the new OCZ 520w PSU i'll be using, then putting the whole thing together and keeping it all under a TDX. I'll be sure to post screens as soon as I can!
NICE, hey why dont you post on this thread with your new chip. When you have it up and running.Quote:
Originally Posted by OperativeSix
http://www.xtremesystems.org/forums/...ad.php?t=71044
I'm posting this from a laptop right now actually. I'm tearing apart a few systems for this build; i'm about to start taking the old rig out of it's case...I should be up and POSTing in about an hour.
PS: Should I flash my DFI board to the 6/23 BIOS (from what I can tell, this is the best for mushkin redline) before the windows install, or after?
Use the 704-2BT bios cuz its the best so far for my CH-5's! I have gone through many bios's and this is by far the best. Here the last one on the list.Quote:
Originally Posted by OperativeSix
http://www.bleedinedge.com/forum/sho...53&postcount=1
I am thinking I lucked out with my 4400+ as well, got it around the same time a few people here got them, and since then I have seen a couple 4400+ with different steppings not doing so well.Quote:
Originally Posted by njkid32
I had a 4200+ CCBWE 0527RPMW on 704-BT bios.
apart from cl-2 ram setting, this babe don't like cl-2.5 at all. My XLPT are 300Mhz capable under winnie and 305Mhz under venice but only CL2 for this X2 only.
tried 8x300 , 9x300 , 10x275 and all no go for this chip....
shift from orange to yellow slot also same....now running at 11x245 cl2-3-3-6-1T but maxing out my TCCD over this range....
anyone had a clue or any experience on this ? cpu not max out yet, it climbs after dual priming every time and now at 11x245 @ 1.39v...
anyone ? or should i flash to other 623-1 to try it ?