Im using F7
Printable View
Im using F7
Lol, I just tried FSB again with F8C on +18C ambient.
First boot straight 262FSB: http://ceemic.pri.ee/amd/262fsb.JPG
And with higher NB: http://ceemic.pri.ee/amd/252fsb.JPG
2 days ago I tried my rig with LN2 and I couldn't pass 213FSB.
http://ceemic.pri.ee/amd/965@6709.JPG
http://ceemic.pri.ee/amd/10.688.JPG
It can go higher than that ceemic ;)
I can boot 300MHz HTT easily :)
250FSB is enough for me :)
That didn't help lot in today:
http://ceemic.pri.ee/amd/965@6741.JPG
http://valid.canardpc.com/show_oc.php?id=867580
http://ceemic.pri.ee/amd/10.625.JPG
Max NB I could run 1M was ~4180MHz.
So i assume you like F8C bios:)
neo mike, seems better for me than F3L :)
http://www.upload.ee/thumb/290584/nb_4539_10.610.PNG
6408mhz
nb 4539mhz (H)
superpi 1m time 10.610
sick nb speed :P more to come...
good job. We need new WR in x64 CInebench and in wprime (in wprime is the best HT/NB 2200/2200MHZ! )
Wow 10.6 super pi is sweet.
Crazy stuff happening on Gigabyte 790FX-UD5P + G. Skill Ripjaws red 1600Mhz rated C9-9-9 24 1.5V
First of all, where did you guys noticed vmem droop on this mobo? Actually it overvoltage mine ram. Set 1.7V and u get 1.75V in DMM, 1.75 and I got an 1.81V!
About the RAM:
No way to get it stable working on Cas7 using 1333Mhz divider but what about Cas6 @ 1600Mhz when using 1066Mhz divider?
Even in this setting there is no way to match TRCD and TRP w/ the CAS there must be an 9 in TRCD to pass 1500Mhz, and unless an 7 for TRP.
Stability Gains can be observed when using higher voltage, anyway I only tested till 1.85V in bios wich actually gave me 1.90V (DMM). thats the only way to get it stable @1600Mhz 6-9-7. By the way I can use 1.75V and get 1600@ 6-9-8 1T.
Any hint of wich chips are them? I've paid like US$135 for 2x 2GB of them. Already in Brasil.
http://i47.tinypic.com/xapekz.jpg
http://i48.tinypic.com/6yz0d0.jpg
So i have read this ENTIRE thread, all i have to say is Chew, ur a very patient person with ppl, lol, anyway ty guys good read, BUT i am still left with this question....what damn ram should i buy (answer would have been hypers im assuming, not so much anymore because of all the deaths) so what sticks should i get for 2x2gb, i want to run the best timings i can (who doesn't lol) should i go for a 1600 7-7-7-23 kit or a 7-x-7-24 kit at 1.65 or lower, or should i go for a 2000 mhz kit at 8-8-8-xx or 9-9-9-xx at 1.65 or lower, seems most tests r on I7's....
Dragon
Chew is a great and paticent guy thats for sure. I would get Corsair GTS 2000 cas 8 4gig kit, about $210 they will do 1600 cas 6, there low voltage 1.65, or you cant Micron GTR, GTS they will run on 1.9 2.0 volts, good for benching, but not for 24/7, thats what i have learned from guys here and this thread.
I have a kit of OCZ 1866 cas 7 and they do 1600 cas 6 is a cake walk, but i want 1733 cas 6, im getting memory errors, so will keep testing them, and there hypers. Hope that helps you.
would this b the ram u speak of for the 2000mhz kit? http://www.newegg.com/Product/Produc...82E16820145266
Dragon
Thats it, if you can order off [url]www.microcenter.com website is only $209, but thats the memory. Well i just got 1700 cas 6 to pass memtest so im pretty happy :yepp:
So i take it these 2000mhz dominator kits use the same IC's as the 1600mhz version just binned a lot better? would something of the same speed by kingston or other b the same as they r a lot cheaper, jw
Dragon
Well i just ordered the 2000mhz Cas 8 Dominator kit from microcenter.com.....gonna b a little over budget now on my build, but meh they better perform :) , the rest of my parts should follow from newegg.com either tomorrow or Monday (gonna have to put some more cash in the bank that ram was 2x more then what i had planed on spending!!!)
Dragon
BUT i get a shiny fan!!! (and hopefully not a bunch of RMA's from them being hypers) So i am asking them now to play nice!! u hear that ram? no deaths for u!!
Is the Tmpin2 reading on AMD Overdrive closer to reality for the 955 CPU temp than the CORE cpu readings?
I hate that all cores read the same temp which I assume is completely stupid and impossible.
i was also wondering how all cores read the same temp (even my duel core @100% load shows temp fluctuations between them but they always avg about the same temps in the end, core 2 does run a little bit hotter), But i don't think i have EVER seen an AOD screen on idle or on load where the cores r at diff temps even by 1 deg, anyone else but me and Shaolin95 think this odd? or r the cores just loaded that evenly? one would think one core would still b hotter then another due to heatsink mounts and tim applications varying, or does each core not have its own probe? and it just reads the temp from one core and outputs that as all 4?
Dragon
In AOD all my cores are same temp all the time from what i have seen.
Doesn't matter of which program you use. Run Everest and you'll see the same = all cores at same temperature. That's because of one temp sensor in AMD CPUs which is placed in the middle of the cores and it read only one temperature. Programs are there just to read what the sensor "say".
Kind of lame I guess when you are trying to make sure your TIM and Heatsink setup is done right.
Oh well, guys do you know how much voltage is safe for a 955 on AIR.
Due to my air duct and my extreme Noctua NH-D14 (SanAce + Scythe + Delta) I get about 43-45C load temps...just wondering how far I can go.
Finally 4017Mhz OCCT Stable at NB 2678Mhz
Windows 7 64bit of course...
http://img6.imageshack.us/img6/2903/...9mbocctsta.jpg
http://valid.canardpc.com/cache/banner/889055.png
nice C2 chip man !
Thanks, just taking advantage of the winter temps and my air duct plus the Noctua NH-D14 with my 3 fan config. lol
I was able to run 64bit Cinebench at 4095 but OCCT bsod. I did not adjust any voltages from the previous 4017 run so I need to push a bit more later tonight.
http://img697.imageshack.us/img697/4884/d14a.jpg
Sorry for the bad pic...I was not in a very picture taking mood that day.
Looks like 2 of my DIMM slots died. 2 & 4. I tested all the slots with 3 different kits. I can run one or two dimms in 1&3 but nothing in 2 or 4. Anyone run into this issue? PSU? Board RMA time?