Printable View
I take it your cable has right angles on both ends? I am not sure if you could get the sleeve over the plug and still keep it from fraying....:shrug: All the cables I have used have had at least one end that was straight.Quote:
Originally Posted by Touge180SX
However if someone has a way it will turn up in this thread :yepp:
Yep, dual right angle connectors. I'm using the MDPC-X SATA sleeving but the problem really seems to be getting the heatshrink over. Thanks for the help though Dangals and quick response!Quote:
Originally Posted by Dangals
To keep your ends from fraying just use a hot knife to seal the ends. Then you can wiggle it all around and get it just how you want it and keep it nice and pretty. I couldn't have sleeved tubing without it.
Once I cut my sleeving, I hit both ends with a lighter really quick and that stops the fraying also (no hot knife :(). Now the problem is figuring out how to get SATA heatshrink over the 90 degree connector. :shrug:Quote:
Originally Posted by BlueAqua
you may need to shave the edges of the connectors a bit
on previous page elzhi asked how to cut heatshrinks of equal length, here is my solution:
I made the template for different (previously measured) lengths using flat piece of packaging foam and knife
http://img143.imageshack.us/img143/6820/img0896v.jpg
then put the heatshrink inside and just cut it with scissors snuggled to the foam
http://img59.imageshack.us/img59/7053/img0901s.jpg
the result is pretty good, but I would like to improve this "device". It can be some kind of this foam template made of plastic with cutted holes of different lengths (e.g. 5,6,7,8,9mm) and rotating blade, kinda like manual knifes for plate steel.
Anyway even in this state this thing really saves my time :D
Awesome idea! :up:
I just wanted to say that MDPC-X is probably the best retailer I have ever dealt with. I'm sure many of you already know this, but I just wanted to say it here again!
I placed an order at noon today and it has already been confirmed and hopefully shipped soon! Nils (aka dualbrain) even sent me a personal email thanking me for my purchase and welcoming me to the MDPC family!
Once again, you can't go wrong dealing with Nils from MDPC-X and I will continue to provide my business for years to come! Thanks Nils, your the man!! :up:
Has anyone sleeved any of the new Corsair Series? for the life of me, I cant get the pci-e pins out.... i've ruined 2 cables now because i've pulled out the wire, not the pin :S
Any advice?
oh yes, i know the problem ... :(
Corsair use bad Connectors they donīt fit 100%, so it can be that the pins canīt get out and if you pull the cable you have the cable without the pin in the hand.
i think here you use the screwdiver techniqe to get the pins out (the brooken too ;) ).
Yeah, just like fhantastic said, he helped me, thanks again fhantastic! I have an HX1000 and couldn't get some out. I took a small flathead jewelers screwdriver and twisted 180 degrees on one side, then did it again on the other side and they finally came out! To fhantastic's idea! :up:Quote:
Originally Posted by fhantastic
Thanks for the guide, i was able to do this because of it.
[IMG]http://img200.imageshack.us/img200/4...eving22226.jpg http://img230.imageshack.us/img230/9...g22233copy.jpg[/IMG]
If you want to use heatshrink over the right angle you'll have to use the larger black heatshrink which only comes with the MDPC-X Jumbo pack, it's not for individual sale but email Nils ;)Quote:
Originally Posted by Touge180SX
Yeah, I'll email Nils. I have an order just about to ship from him, I'll see if I can add some if possible! Thank dingdong!! :up:Quote:
Originally Posted by dingdong555
well,
I already distroyed 2 pcie cables doing it lol so I just went and picked up and Enermax psu.... a 620 instead of 750..... (the 750 was overkill anyways)
I'll take some pics when I can get favorable lighting
Quote:
Originally Posted by mattlef
Good Luck, mattlef.
You haven't really destroyed the Corsair. It's not hard to recrimp new pins on the ends where they've come out ...
a Shuttle PSU i did for a friend :)
http://i288.photobucket.com/albums/l...c/P9200942.jpg
http://i288.photobucket.com/albums/l...c/P9200938.jpg
http://i288.photobucket.com/albums/l...P9200948-1.jpg
Ya... that PSU is totally busted... ;) Ship it to me so I can properly dispose of it :up:Quote:
Originally Posted by mattlef
two original molex remover are better than one :rofl:
http://www.abload.de/img/dsc03355kow5.jpg
fhantastic man!!
:)
fhantastic, your photos are ridiculous! You need to fly to Japan and take some pictures of my rig for me! :up:
Fhantastic ... reveal the studio-setup you are using :D:D:D
Guys ... you will see that you can never afford such a setup :D:D:D
Yes, reveal dammit! :up:Quote:
Originally Posted by dualbrain
Oh, I cant' afford a setup like that because I like giving Nils all my money!
Nice work fhan!! Where do you get that big sleeve? I need to get some of this but I don't see any at the MDPC-X site.Quote:
Originally Posted by fhantastic
if you pay the ticket ... :DQuote:
Originally Posted by Touge180SX
:D:D:D:D:D:D:D:DQuote:
Originally Posted by dualbrain
I use white paper, a tripod and my wonderful windowsill.
Nothing else! :yepp::yepp:
Itīs this one :)Quote:
Originally Posted by dylskee
http://en.mdpc-x.com/mdpc-sleeve/sle...leeve-pack.htm
And here another Pic :D
http://www.abload.de/img/dsc0336076u6.jpg
http://i255.photobucket.com/albums/h...n/MDPC-XMe.jpg
http://i255.photobucket.com/albums/h...vingElevon.jpg
http://i255.photobucket.com/albums/h...vingTwelve.jpg
The Sun is hiding away behind clouds so thats it for now :).