ATI 4850/4870 voltmod thread

Printable View

Show 100 post(s) from this thread on one page

09-09-2008, 09:27 PM
Vatos_locos

Quote:

Originally Posted by eddieobscurant

I've got my reference sapphire at 820Mhz with 1.44vcore 24/7 for several months without a problem. I have tried up to 1.6 vcore for benches without a problem. I couldn't get it 100% stable at 840Mhz no matter what voltage i used, even at 1.6 it wasn't 100% stable. The only problem that i have found is that at high voltage during furmark, when i'm not stable (for example when i was trying for 840) and i got artifacts, these artifacts wouldn't leave until i shut down my computer. After that everything was normal. With just a reboot the issue wasn't resolving and i don't know why.

mine was not reference sapphire but the core just destroyed at 1.5V artifacts even at stock the mems was stock then unmodded duno yesterday i got it buck from rma this time they gave me reference but with 1Gb mem i was using ati tool for testing do you think furmark is better ?
09-09-2008, 10:29 PM
Viilutaja

Quote:

Originally Posted by Barr3l Rid3r

30ºC IDLE / 39ºC Load @ Furmark
@840Mhz/2000Mhz

WOW. And without any voltmod? Have to try myself that core speed :D Maybe there is a mhz wall like there was with the HD3800 series :P
09-10-2008, 03:04 AM
eddieobscurant

Quote:

Originally Posted by Vatos_locos

mine was not reference sapphire but the core just destroyed at 1.5V artifacts even at stock the mems was stock then unmodded duno yesterday i got it buck from rma this time they gave me reference but with 1Gb mem i was using ati tool for testing do you think furmark is better ?

I think you were unlucky and you got a bad sample. I hope your new is ok. Yeah, i think furmark streesses the gpu way more than atitool, specially if you set it above 1024*1024 or fullscreen, and it will also test the cooling solution of your card as after a while it gets really hot , way above you 'll ever experience in games and specially the mosfets.
09-10-2008, 11:20 AM
dejanh

Well, after a full day of gaming on the Palit card it started artifacting in Turbo mode...ATITool, 3DMark06, Vantage, games, everywhere...bah! I was so happy with this card too. It was the first 4870 that seemed to work properly right out of the box.

Anyway, took it to NCIX, they tested it and pronounced it DOA and gave me a refund. I did not even get an opportunity to mod it :( I think I am done with 4870s. My opinion about these cards has gone way downhill. I would not mind getting HD 4850s but I do not have a CF board so no point.

It really is too bad. I truly wanted to get back to ATI :(
09-10-2008, 01:01 PM
Vatos_locos

Quote:

Originally Posted by eddieobscurant

I think you were unlucky and you got a bad sample. I hope your new is ok. Yeah, i think furmark streesses the gpu way more than atitool, specially if you set it above 1024*1024 or fullscreen, and it will also test the cooling solution of your card as after a while it gets really hot , way above you 'll ever experience in games and specially the mosfets.

ok i will give it a try now :p
thanks man :)
09-10-2008, 04:21 PM
Barr3l Rid3r

Quote:

Originally Posted by Viilutaja

WOW. And without any voltmod? Have to try myself that core speed :D Maybe there is a mhz wall like there was with the HD3800 series :P

Wrong, it is @ 1.34v -vGPU-
09-10-2008, 09:08 PM
ARH

Quote:

Originally Posted by Vatos_locos

someone how much voltage the 4850 Core can handle ? i got one and in 1.5 she got sic forever :p

every thing above 1.4v will hurt the GPU. I have also tested 1.6v but my card died in the 3D mode.
09-10-2008, 11:38 PM
Vatos_locos

sure i am not talking 1.5 for 24/7 use :)
my card died in about 2 minutes with 1.5 :/
09-11-2008, 12:39 PM
Vatos_locos

Quote:

Originally Posted by eddieobscurant

I think you were unlucky and you got a bad sample. I hope your new is ok. Yeah, i think furmark streesses the gpu way more than atitool, specially if you set it above 1024*1024 or fullscreen, and it will also test the cooling solution of your card as after a while it gets really hot , way above you 'll ever experience in games and specially the mosfets.

just as for furmark the card was realy cold at the mosfets the core is under water so 40*C on load i used 1680x1050 full screen but ati tool finds some artifacts on very high frequencys that furmark does not :)
09-13-2008, 12:03 AM
Deanzo

Has anyone tried the 4870 (512Mb) mods on the 1GB card ?

I haven't got my hands on one of these cards yet, but would like to know if they are the same.
09-13-2008, 04:15 AM
Vatos_locos

on my sapphire 1Gb the mods are the same :)
09-13-2008, 04:28 AM
|Oc|REvO_HsArC

these cards make crazy noises under serious heavy load... overclocked to 850mhz is even worse. Its like its about to blow up
09-13-2008, 04:31 AM
cowie

well one of my card was wezing like a heavy smoker at 1.25 then let go and went boom.
the other all fine at 1.55(benches only)
09-14-2008, 04:17 AM
Martin.v.r

1 Attachment(s)

I flash to ASUS 4870 TOP bios,whit stock Cooling
3D-mark
01 860/4100
03 860/4100
05 860/4052
06 840/4052

best driver is 8.7 i try 8.9:down:
09-14-2008, 11:29 AM
JameCa

hi.. im bit new in the whole voltmod

can any1 show me with a picture the place where i can pencilmod both the gpu and the GDDR on a 4870.

orginal pcb

im sorry i dont have time to search the whole tread
09-14-2008, 11:40 AM
SNiiPE_DoGG

Quote:

Originally Posted by JameCa

hi.. im bit new in the whole voltmod

can any1 show me with a picture the place where i can pencilmod both the gpu and the GDDR on a 4870.

orginal pcb

im sorry i dont have time to search the whole tread

there is no pencil mod for gpu on the 4870
09-14-2008, 01:12 PM
ceemic

HD4850 Sapphire users: in what Vcore OVP kicks in? :D
09-14-2008, 01:43 PM
Vatos_locos

1.6 V
09-14-2008, 02:05 PM
jimmyz

Quote:

Originally Posted by M-XXXX

http://forums.techpowerup.com/showthread.php?p=879319

This VMOD is for red PCB, but I have blue one. Two pictures of the problem:

http://shrani.si/t/39/10u/kg0SaKK/vddcsolder.jpg http://shrani.si/t/37/1n/4yNWBI53/img5012.jpg

Is there VMOD for blue PCB? Or does anyone know the bios who would raise GPU voltage?

use an exacto knife or razor blade to carefully scrape away the coating. you should see the pad then and use the multi to verify it is the same resistance measured earlier for the red cards. if it is you should be fine. also verify the other parts of the card are the same like the 1165MF etc.
09-15-2008, 03:47 AM
funkflix

Quote:

Originally Posted by dnottis

Here is a few mins at 900mhz, again no vmod just flashed to Asus TOP bios. That is the max of the CCC with this bios.

http://3dxtreme.net/other/ASUS%20HD4870/900core.jpg

Did you guys testing with Furmark, renamed the *.exe to f.exe for example? Frames looks a bit low for that clocks. If you rename the *.exe you will have a great increase in power draw, temperature, FPS and instability. ;)

Here is my card running the standard benchmark of Fur with renamed *.exe, stock volts:

http://img158.imageshack.us/img158/3347/furhi1.jpg

Will do the mod this weekend, let's see what clocks it can do then.
09-16-2008, 05:41 AM
mauronow25

Hello , from Argentina.....sorry off-Topic :-(

I^flashed my sapphire 4850hd.....
I edited with the latest version RBE the bios of my 4850, use the method 1 but selected bios 4870. :-( (128k)

I^am Flashed with atiwinflash and my 4850 now is not recognized by atiflash, atiwinflash, xp :-(
I do not flashing in any way because it is not recognized.
It xp works, the pc BOOT ok but is not recognized.
you can erase the bios bypassing pins some integrated?
Not that I could do please help?

10000000000 Thanks friends !!!

MAuro
09-16-2008, 06:00 AM
Caveman787

holy crap 81 amps thats a big power draw....so at that point it'll take a 1000 watt psu to keep it running?
09-16-2008, 06:40 AM
r4st4m4n

Quote:

Originally Posted by Caveman787

holy crap 81 amps thats a big power draw....so at that point it'll take a 1000 watt psu to keep it running?

It depends of the voltage ... At 1.3V it draws "only" 105W ;)
09-16-2008, 09:38 AM
Barr3l Rid3r

Had anyone tried to use h4870 hash method 1 in a 4850?
09-16-2008, 10:08 AM
mauronow25

Quote:

Originally Posted by Barr3l Rid3r

Had anyone tried to use h4870 hash method 1 in a 4850?

noooooooooooooooooooooooooo :(:(:(:(:
That method was the one I use now and is not detected :-(
my 4850 is dead ......... Please read my post #921 ..and could help?

Show 100 post(s) from this thread on one page