dear paoaudit:I rarely come here.
Your project so beautiful. Blue and white tones. I like it..
Printable View
dear paoaudit:I rarely come here.
Your project so beautiful. Blue and white tones. I like it..
agreed, thats a gorgeous setup there pao.
GTX 580 Waterblock arrived + new Tygon 16/10 + new Feser Fittings :)
http://www.abload.de/img/127u00.jpg
http://www.abload.de/img/13kn7v.jpg
amazing colour scheme there mate :) love how it all matches up. imma gunna steal the placement of the rez tho, its rather hot.
Very impressive xFEARx3. What water additives use?
:up: Very nice, question....GPU before CPU? However guess on a single loop ultimately is doesn't make a difference temp wise correct? Also 16/10 in US terms is 3/8" ID x 5/8" OD? :shrug:
Water: Feser One Fluid - UV Blue
In a single loop it doesn't matter what's first.
16/10 is 3/8" x 5/8"
Good Job!!@deuketc
Yes, very nicly done....a neat and tidy. Just wise all cases did the "from right side" thing as one spends money to make sure the GPUs look sharp, but no-one ever see it! :shakes:
Keep an eye on PSP in the next few days when I get around to installing the rest of the lighting and hit it with the vac to get my calico cat's hair off the grills since I found the tripod and the holiday's are over.Quote:
Originally Posted by jedihobbit
I wanted to do the reveal on x-mas. Then pushed it to New Year's. Well both have come and gone because of being busy. It seems the same for many others since this thread has slowed down. LOL
Glad I'm not the only one who has been slammed busy.
Nice!
OMG so much red thought it was an ATI build....oh that's right they don't exsist anymore! :rofl: Nicely done!
@wermad how do you like the EK SLI bridge?? Serial or Parallel?? :shrug:
Very nice but, I hate artsy shots like that that don't show off the whole beauty of the build. . .give us a full shot too. :hammer: You can add one more pic of that build, make it a good one. ;):DQuote:
Originally Posted by Tcassius
BTW, HNY everyone!:party:
I agree with WL, I'd really like to see a full system shot of your build Tcassius :D. Also, nice case deuketc, it has a nice Murdermod vibe to it ^^.
And happy new year to you too WL, and everyone else here of course!
Quote:
Originally Posted by Waterlogged
Ok. Guys...Thx :up:Quote:
Originally Posted by Alexandr0s
http://img375.imageshack.us/img375/2396/dsc07798a.jpg
:shocked: WOWser.......makes it look even better!! :toast: :worship:
:yepp: That's the stuff. ;)Quote:
Originally Posted by jedihobbit
Thanks for the picture! :D
Very nice, TCassius.
hey guys i want to share my pics , what is the method to posting pics ? (i tried the add a image option but it didn't work) :( !
please help pm me please
thanks
You can always go to PhotobucketQuote:
Originally Posted by stevecrossfire
Create an account and upload your images there. Then use the [IMG] tags to post them. These will display under your images after you upload to photobucket.
thanks
http://i550.photobucket.com/albums/i...g/newpc029.jpg
http://i550.photobucket.com/albums/i...g/newpc032.jpg
http://i550.photobucket.com/albums/i...g/newpc040.jpg
one more dusty one lol with some changes
http://i550.photobucket.com/albums/i.../IMG_38394.jpg
these pics are a little old (i've changed my ram and did a few mods since) i will post newer pics soon and yes its a bit dusty
NPQuote:
Originally Posted by stevecrossfire
I'm really itching to post up one shot of mine tonight even though its not finished but I would violate the rules of the thread and fear Shazza would snip me. :shocked:
It just needs more lighting and a bit of dusting and it will be done. sigh:shakes:
Come to think of it after cleaning everything up from putting it together to get it off the dining room table since I was getting my fiancee a new table for x-mas. I don't know where I put the other 4 tube lights or the inverter. LOL
I love its looks and simple design (parallel). a bit challenging at first, though I would highly recommend read the instructions thoroughly and a few times. I messed up the first time w/ the screws and had a leak :doh:Quote:
Originally Posted by jedihobbit
Was going to mention that!!! :rofl: :ROTF: It is amazing how these things attract stuff isn't it! (Should see the cat hair in mine.) ;)Quote:
Originally Posted by stevecrossfire
Interesting and will look forward to the newer pix. :yepp:
@wermad, might be sending you a PM with some questions on that in the near future - thanks!
Man, what's up with all these ultra slick no-speck-of-dust-and-uber-clean mods? Good job on all of them! :D
They haven't been put in place yet, either that or in a clean room!! :rofl: :ROTF: ;)Quote:
Originally Posted by TJ Tom
. . .or to much time with a can or two of air.:p:;)Quote:
Originally Posted by jedihobbit
imaksi what's with the ghost cat in the second pic :D?
Reflection from glass or?
DSLR camera filmed with a high shutter speed, at which time the cat came out from behind the bodyQuote:
Originally Posted by s0lid
:up: very niceQuote:
Originally Posted by xFEARx3
:D thank U KrupQuote:
Originally Posted by meo95
Project continued offline.:p:
Very Cool!!@imaksi :up:
Excellent :up::up:Quote:
Originally Posted by paoaudit
Getting all kinds of nice stuff coming in!! :up: :welcome:
Here is mine, sorry about the bad pictures I didn't have enough time to play with the camera. Specs in sig
[IMG]http://i277.photobucket.com/albums/k...h/DSC_8572.jpg[/IMG]
[IMG]http://i277.photobucket.com/albums/k...h/DSC_8575.jpg[/IMG]
[IMG]http://i277.photobucket.com/albums/k...h/DSC_8580.jpg[/IMG]
[IMG]http://i277.photobucket.com/albums/k...h/DSC_8581.jpg[/IMG]
@Schmidtc89
this smiley is nice :eek2:
but you system too :eek2::eek2::eek2::eek2:
how well does the OCZ phase changer work. can it handle full OC'd loads?
It works but it has a low limit on holing any kinda load probably around 200W anymore it falls on its face. I do plan to do some modifications soon, so hopefully I'll get it to handle a higher load.Quote:
Originally Posted by hello im sean
:shocked::shocked::shocked:@dafeeessh
@ Schmidt
I definitely read Cameron Schmidt :banana::banana::banana::banana:ography, which in my opinion would have been way more appropriate! :D
took som better pics than the old ones :) sorry for the dust :P
http://www.sweclockers.com/image/gal...nal&k=97a39adc
http://www.sweclockers.com/image/gal...nal&k=01c948a7
http://www.sweclockers.com/image/gal...nal&k=4f3625a9
http://www.sweclockers.com/image/gal...nal&k=f334383e
Hellos, some pictures of my TJ07, forgive my bad English
http://www.abload.de/img/dsc049546el9.jpg
http://www.abload.de/img/dsc03548doa8.jpg
http://www.abload.de/img/dsc05019ygf3.jpg
http://www.abload.de/img/dsc048619gdj.jpg
:)
^ forgiven :)
Very Nice and the dust just indicates that it is a working system!! ;)
The red fan at bottom right for the HDDS? Also two loops, large up and small down? :shrug:
yepp. it cools the hotswap Hdds :)Quote:
Originally Posted by jedihobbit
it´s just a single loop with dual pumps
@ gogofr......nice and simple, one question, why such a large reservoir? It is my understanding that they are for refilling and they only need to be just large enough to keep the pump from cavitating?
Still looks good though! :D
Its all for the looks ;)Quote:
Originally Posted by jedihobbit
My first water cooled system.... Took me forever! ;-)
http://www.3dchipset.com/pc/mypc1.jpg
http://www.3dchipset.com/pc/mypc2.jpg
http://www.3dchipset.com/pc/mypc3.jpg
http://www.3dchipset.com/pc/mypc5.jpg
Great work, 3dchipset :up:
Quote:
Originally Posted by gogofr
lovely paperwall... ;)
Thanks Shazza, means a lot.
You have a buildlog 3dchipset? Is your case powdercoated or spraypainted? Nice system!
love the loop layout 3dchipset! TJ07s are a dream to watercool :yepp:
I can believe it as 33 - 50% of the reason I pick a component is bling! :shocked: :rofl:Quote:
Originally Posted by matt220
Quote:
Originally Posted by shazza
Quote:
Originally Posted by TJ Tom
@ 3dchipset......think all the big guns covered, so :clap:Quote:
Originally Posted by matt220
Actually I don't have a build log for this PC... I basically started in July and would work on it every few days until it was finished last week. The case is powdercoated.
The system contains,
ek Supreme HF CU block
ek Rage III Extreme Northbridge/Southbridge Full block
ek 580 GTX Nickel Back plate
ek 580 GTX Nicke/Acetal GPU block
XSPC Quad 120 Radiator
4 x Gentle Typhoon's 1500RPM fans
White 1/2" x 3/4" tubing (Primochill brand)
IandH StealthRes 225 reservoir
Bitspower Shiny Silver & Matte Black 1/2" x 3/4" compression fittings
Intel 980x Core i7 @ 4.2GHz
Asus GeForce 580GTX
Asus Rampage III Extreme
Corsair 6gig memory
Corsair AX1200 Modular powersupply
Swiftech MCP655 Pump with Bitspower Matte black shrouding
Silverstone TJ07 with Murdermod backplate & Powdercoated throughout
Took about 5 months to save up for all the goodies.
Lanboy Air ... i7-950 running at 3.9G
http://www.treasure-cove.net/LA8.jpg
I was going to install the Swiftech Edge 240 Kit, ... but I would have had to do some majjor re-work of hte case to get that one to fit, .. so I opted for the Coolit ECO C240.
http://www.treasure-cove.net/LA9.jpg
http://www.treasure-cove.net/LA10.jpg
Still have a few more things I want to do.. right now, under load, the temps are running 67-68,... so I'm going to install 4 Sythe Kraze's Push-Pull and see if that will get the temps down in teh low 60s.
Your case reminds me of the ASUS Ares... go get one haha
http://www.hardwareheaven.com/review...res_5870x2.jpg
Very Nice@3dchipset
Hello Boys,
this is my new PC with Efi-X with operating system Mac Os-X 10.6.
Lian-Li TYR 900 Red Edition | Gigabyte UD5 | Xeon WS 3520 | Corsair Dominator GT 12 GB | Tubing 19/13
Fabiostory cool system :up:
My 1st post here on XS,
My Square1 system:
http://img59.imageshack.us/img59/110...491024x768.jpg
http://img708.imageshack.us/img708/5...451024x768.jpg
http://img24.imageshack.us/img24/580...361024x768.jpg
http://img180.imageshack.us/img180/8...591024x768.jpg
Hope you like :)
P.s: sorry for the watermarks, but a long ago i had some photos "stoled" so, don't give another chance :mad:
You should just do an embedded and encrypted watermark instead.. that way it doesn't ruin your photo, and if you want to take someone to court you'll win when you present your encryption key which unlocks your watermark on the lower bit layers.
Second incarnation of Black&White in my small Cosmos:
http://g.imagehost.org/0675/B_W_000114.jpg
http://j.imagehost.org/0576/B_W_000117.jpg
http://j.imagehost.org/0186/B_W_000119.jpg
http://j.imagehost.org/0111/B_W_000120.jpg
I have to change my signature :p:
that is SsssTunning!
if only i had the coins :)
Thanks but You never know what would happen tomorrow. Be optimist and you will get enough coins to start build your own stunning project :cool:Quote:
Originally Posted by Spazloy
That's worth the wait, cuz it looks fabulous.Quote:
Originally Posted by 3dchipset
That and with the new Adobe PhotoShop it is not very hard to erase a watermark and make it look like it was never even there to begin with anymore. :)Quote:
Originally Posted by wiretap
tadzik1231 your watercooling liquid is white?
What brand is that?:up:
tadzik1231 ive seen every page of this thread and that's one of the sickest setups yett. i'd love to see more pics, maybe one of the whole case?
Yeah, it's white like a snow/milk/lime:Quote:
Originally Posted by Raiden
http://j.imagehost.org/t/0924/B_W_000103.jpg
You can find it here (and probably only here): Click. I saw somewhere Mayhem's approach to white nano but it's not ready yet.
Look here: Click, and it's not my last word :) have got some new ideas (double B&W GTX 570 + double pumps + double rez). I'm just anxiously waiting for a few parcels.Quote:
Originally Posted by hello im sean
What kind of lights are used in this case to bring out the white Primochill? Are those just white leds?Quote:
Originally Posted by paoaudit
No quoting pics. :up:Quote:
Originally Posted by pikkashoe
Thanks, scgt1. About time for another REMINDER ...
Also - please keep questions and discussions to a minimum ... feel free to PM or check out worklogs. This is not meant to discourage communication, just trying to keep the thread manageable as an archive of finished water cooled systems.Quote:
Four Simple Rules:
1) No larger than 1280 x 1024 pixel (but 1024 x 768 pixel is preferred),
2) The limit on the number of pictures is 4 per case (if you want to post more than 4 pictures, use thumbnails or post links without using the IMG tags),
3) Do not quote images,
4) Finished cases only, no worklogs.
Blackstare...very nice, are you planning on painting the inside black?
"New Blocks on the Kids".... Gigabyte GTX 580's:
http://img717.imageshack.us/img717/7567/dsc1026q.jpg
http://img839.imageshack.us/img839/9111/dsc1027f.jpg
http://img28.imageshack.us/img28/8621/dsc1029m.jpg
http://img694.imageshack.us/img694/9121/dsc1030x.jpg
2 weeks ago i upgraded my old Q6600 setup to a i7 setup. Today i finished the last details.
http://tweakers.net/ext/f/meSZazwOa8...okS4h/full.jpg
Hi Everybody
any photos about mine (sorry for my english, french people inside), this is my first built :p:
http://img607.imageshack.us/img607/3452/p1110358.jpg
http://img51.imageshack.us/img51/6978/p1110359o.jpg
http://img819.imageshack.us/img819/1...itier12.th.gif http://img210.imageshack.us/img210/6...itier32.th.gif http://img109.imageshack.us/img109/9...itier42.th.gif http://img823.imageshack.us/img823/1...itier82.th.gif http://img21.imageshack.us/img21/7983/boitier92.th.gif
http://img714.imageshack.us/img714/1...tier102.th.gif http://img717.imageshack.us/img717/4...tier122.th.gif http://img834.imageshack.us/img834/7078/cg2.th.gif
thanks to XTrem's members for all pleasure and ideas you give me with your systems :up:
@ snipeangle :shocked: :up:
did u paint the fittings and the part of the card block white? also what store u guys buy all ur tubing/water/waterblocks from online? is it frozencpu? and also the sleeving kits...im duying to do thatdo u guys use a special tool to pull te pins out from the connectors? cuz i tried it to a mini screwdriver but it ended up ruining the pins inside the connectorQuote:
Originally Posted by tadzik1231
i did some sleeving on my system, still not finished yet though. i still have to do the 24-pin power. i bought all the sleeving and pin removal tool from performance-pcs.comQuote:
Originally Posted by MasterSe7en
i got this sleeving
and this pin extraction tool
i had a bunch of heat shrink at work so i didnt need to buy any, but i used 1/4" 3:1(1/4" before shrink, 1/12" after shrink) black heat shrink and it worked out real well
snipeangel: what CPU waterblock is used in your build?
@ jedihobbit, I don't know if it's for me but if it is, thanks a lot ;)
@ churchy, it's an old Enzotech Luna, it works fine IDLE 36°C and 64°CMax with 1.38V for VCore :D
Don't quote pictures, ask questions on PM :) I've just mailed you the answer.Quote:
Originally Posted by MasterSe7en
Thanks! Actually I want to paint the interior white :DQuote:
Originally Posted by mpower1001
@PilatuS, that's some epic insulation you got there :eek: :rofl:!
What kind of paint did you use on those compression fittings?Quote:
Originally Posted by tadzik1231
I don't use it anywhere in the case but where you can see it. I think it looks good that's why i use it. Don't like to see the allu of the case, don't want to paint that black either, that's why i use this stuff.Quote:
Originally Posted by Alexandr0s
No offence but:Quote:
Originally Posted by junkun13
"I said it before
I'll say it again
If you could just listen
Then it might make sense"
Offspring - All I want
No quoting pic. :up:
- compressions (Feser) powder coated RAL 9016, threds have to be protected
- rotary (Bitspower) aluminium grey primer + "sleek" Motip RAL9016
- GPU block powder coated RAL 9016, surfaces resposible for heat conduction, threds and spots under standoffs have to be protected
That is my watercooled striker II extreme .......and I think to go for Chilled cooling soon:D
kids lighting small tweaks you like?
http://img262.imageshack.us/i/11012011067.jpg/
http://img130.imageshack.us/i/11012011066.jpg/
http://img98.imageshack.us/i/11012011065.jpg/
My monster :) still want to change my motherboard sometime or another :) but it,s fine for now :)