correct
a couple of other settings didn't stay fixed for me....i've already updated the sticky at Abit USA Forum
Quote:
Originally Posted by Dark_templar
Printable View
correct
a couple of other settings didn't stay fixed for me....i've already updated the sticky at Abit USA Forum
Quote:
Originally Posted by Dark_templar
well i think there is a problem with cpuid and cbi with my my detecting the right voltage for the cpy cause teh uguru software detects it as overvolting close to 1.5vcore.
Hope they finish up their new bios soon.Quote:
Originally Posted by dinos22
I have a question looking for a mb for mild oc and stable beside dfi? Is this board stable enough and also capable of running 1T mem? what about temperature reading is it correct?
Woot i just received this email today from my ISP. My current connection was 5mbps down 1mbps up and this came in the mail today.
Dear Cox Premier Internet Customer,
We are pleased to announce that we are now providing you more of what matters when choosing a High Speed Internet provider – SPEED! In order to provide you with the best value in High Speed Internet, Cox is INCREASING the speed of your PREMIER High Speed Internet Service. You now are enjoying up to 15Mbps download and 2Mbps upload speeds! That is triple the speed at the same low price!
nice one
if optus changed our cable speeds in Arsetralia we would probably have to pay double......i have lack of competitions.......2Mbps upload w00t......cable here is bloody 128Kbps upload:( and 11Mbps download i think
Quote:
Originally Posted by chew*
yah unfortunatley the premier service i have comes at a premier price.
3mbps down and 768 kbps up is 39.99 a month my service is 79.99 a month for 15 mbps down 2mbps up however I use the upload to the fullest extent as i run a enemy territory server for TWL.
well I'm paying about us$50 for a cable connection at 10Mb/128Kb and that only comes with 12GB peak and 24GB off peak with speeds shaped to 64KbQuote:
Originally Posted by chew*
so it isn't that bad
us$80 gets me on the same plan with with 20GB peak and 40GB off peak
that 10Mb is shared so rarely do you ever get full speeds
broadband sucks arse in australia
Thanks for the modded bios 13 with the 366 divider tictac :woot:
and I'm on iinet DSLAM ADSL 12000kbps down / 1000kbps up / 20gb / AU$50 per month :p:
DAMN YOU DSLAM people....we are supposed to get it first in Sydney arn't we... :D
Quote:
Originally Posted by aussie7
hopefully I'll be able to get adsl soon in my street though it's about 5km from the exchangeQuote:
Originally Posted by dinos22
hey guys AN8 SLi is $134 @ newegg.. $30 off
Heyz
I've just bought an Abit AN8 Fatal1ty SLI and I have finally reached 2700Mhz with my winnie :D
http://img186.imageshack.us/img186/4238/27003op.th.jpg
It was with 2T because I can't get it running stable with 1T enable :(
Anyone else with this problem?
I'm using the last bios. 16
I've also done a suicide shot :D
http://valid.x86-secret.com/show_oc.php?id=29573
(I didn't read all thread because it's just too long for me :D )
nice 356 htt
how well does the abit an8-ultra OC?
i might get one of htese
Well.... what can I say?? Thank You, Very Much. It got delayed as my cousin had to stay over there in NY and so I got Lucky with Newegg's Month End sale... $140 Shipped man I appriciate it :clap:
As People in Mumbai are still paying Rs.11250 ($250) for Asus A8N-SLI :fact:
God I really hate custom duties and asus/msi :slap: for keeping prices so damn high for locals who are not as lucky as me.
nice winchester man
my week 17 venice is similar in low vcore to this Winchester...are you sure that's a winnie....hehhehhee
1T instability is a problem with Venices and I've also seen people have issues with SDs...not sure whether Winchesters have the problem...first time i hear about that...did i say that's a nice winchester
Quote:
Originally Posted by FoxaS
It's a nice one :D but I would prefer a week 44 Winnie :D :D
What kind of problems do you have with your Venice at 1T? ;)
visit my thread in the sig
also visit Abit USA Forum.....you'll find the first sticky on top which i manage which lists some of the issues with these boards
Quote:
Originally Posted by FoxaS
you need an account to visit
sign up it's my favourite forum apart from i4memory and XS
Quote:
Originally Posted by calcal
That's a nice thread :DQuote:
Originally Posted by dinos22
Are you sure that Clawhammers don't have the 1T issue? I might buy a 3500+ CAA2C :D
This board is a POS AND IS REALLY PISSING ME OFF!!!
An8 Ultra, was good for 1t no problems then all of a sudden BAM! totally fux0red no more 1t onlu 2t now i dont know what happened but it is rooted , time to sell it/smash it and get a new board , If it is a bios issue it wouldnt be that hard to fix would it , or dont they have no clue as to WTF is up with it??
Anyone else have the same thoughts as me?? :D
hehehehe get a DFI again and let's see how long will that affair last :hehe: :hehe: :hehe: ....some people are hard to please:rolleyes:
Quote:
Originally Posted by Kenetixx
I am very hard to please :D
Not real keen on the DFI atm i am just going to put up with what i have and then wait till Grouper or similar and burn this POS Abit board film it and post it to Abit :D
Hi all --
After reading this whole thread, One issue I am uncertain about is with the passive cooling heat pipe on the Chipset with these non-Fatal1ty AN8's: will this pose a problem with a water cooling set up? Also, for those running this OC'ed 24/7 on water, does the chipset seem to get very hot with this passive set up and no CPU fan?
If I read the information right, then I believe that this passive cooling solution makes use of the CPU fan to move air through the fins. Therefore, are there other chipset cooling solutions that will fit and work for this if one does not use air cooling? It does not look like a water block will work on this -- at least not the SLI version. Considering that I do not plan to go SLI, I suppose that the AN8 Ultra would be a better choice for chipset cooling options. I kind of wanted to get the AN8 - SLI version just for the extra room and also the option of using SLI latter on.
Which brings up another question: if one only plans to run one video card, does it matter which PCI-E 16x slot is used (i.e. can I use the second slot for a single card)?
I suppose I could shell out the extry cash for the Fatal1ty SLI version -- which has the OTES fans and copper Abit chipset cooler. But I just don't feel right with it .. not at all.. Plus, I just can't stand the look on that kid's face .. Makes me want to place a thumbnail picture of that mug @ Abit’s site on the bulls-eye of a target next time I go to the range... a .45 round should just about cover it, lol (j/k ;) ) :toast: