Deluxe OC discussion thread

Printable View

Show 100 post(s) from this thread on one page

03-17-2011, 03:29 PM
orion23

Rma

Quote:

Originally Posted by babalouj

I have already RMA'd mine and got the new one installed.

I submitted my RMA form with CC information about 2 weeks ago and I still don't have any news on my RMA status.
03-17-2011, 03:54 PM
Bullu$

Does anybody knows what that connector is for?

http://i82.photobucket.com/albums/j2...2600K/ws13.jpg
03-17-2011, 04:04 PM
chispy

Hi Bullu$ , thats for extra power when running crossfire or SLI , its a normal molex connector.
03-17-2011, 04:12 PM
Bullu$

Quote:

Originally Posted by chispy

Hi Bullu$ , thats for extra power when running crossfire or SLI , its a normal molex connector.

Hi Chispy,:up:

I already thought so, because without it I get several bsods/ 3dmarkload errors and so on.(tripple cfx) Yesterday I connect it and it's more stable now.
03-17-2011, 04:34 PM
Sauron_Vie

@unrealer: thx.. :) posted the screeni at the linx 5,+ghz thread

@asmola: will give u a screen tomorrow.. but did u use the right prime vers for SB ?
03-17-2011, 05:48 PM
KGB7

Quote:

Originally Posted by orion23

I submitted my RMA for with CC information about 2 weeks ago and I still don't have any news on my RMA status.

You need to call them. I got mine in 3 days.
03-17-2011, 06:35 PM
JohnMike

I received today my P8P67 Deluxe B3 (1305 bios) and i have a strange issue installing nvidia drivers 266.58 that never seen on my replaced P8P67 Deluxe.

Made a fresh W7 64bit installation and motherboard drivers every is fine until the installation of nvidia drivers, after reboot i can't get to the desktop and have instant reboot. I only can get to the desktop with windows safe mode or uninstalling nvidia drivers.

Is this a known issue?!..... :confused:
03-17-2011, 06:42 PM
Q56_Monster

Can I run sli in the 1st and 3rd pci-e slots? Doesn't seem to work P8P67 deluxe
03-17-2011, 07:30 PM
LeetMiniWheat

Quote:

Originally Posted by JohnMike

I received today my P8P67 Deluxe B3 (1305 bios) and i have a strange issue installing nvidia drivers 266.58 that never seen on my replaced P8P67 Deluxe.

Made a fresh W7 64bit installation and motherboard drivers every is fine until the installation of nvidia drivers, after reboot i can't get to the desktop and have instant reboot. I only can get to the desktop with windows safe mode or uninstalling nvidia drivers.

Is this a known issue?!..... :confused:

I already had 266.58 installed from my P67A-UD4, so no problems here. if there was an issue I'm sure we'd hear a lot more about it.

have you tried uninstalling from safe mode and then doing a clean install? (the checkbox during install)
03-17-2011, 07:43 PM
Sauron_Vie

also using 266.58.. no problems on the pro
03-18-2011, 02:43 AM
Bullu$

Wich voltage/setting do I need to raise for more stability with tripple cfx?

Cause each card (single test) can reach >1GHz core but in tripple cfx it's not working yet.Using 2 power suplies(1000W+750W)
03-18-2011, 05:10 AM
chispy

NEW BIOS for P8P67 (1401) - P8P67-Deluxe (1502) - P8P67-Evo (1502) - P8P67-Pro (1502) Download links here: http://hwbot.org/forum/showpost.php?...&postcount=379 Thanks to Massman at Hwbot for the heads up :up:
03-18-2011, 05:16 AM
chispy

Quote:

Originally Posted by Bullu$

Wich voltage/setting do I need to raise for more stability with tripple cfx?

Cause each card (single test) can reach >1GHz core but in tripple cfx it's not working yet.Using 2 power suplies(1000W+750W)

Try to raise IOH (North Bridge) and (South Bridge) , very important PCIexpress voltage.
Also disable everything that you are not using while benching in the Bios, example: disable Lan , Realtek onboard sound , USB-3 and Sata 3 , 1234 firewire port etc.. , sorry i cannot remember all my settings from my P8P67-Deluxe. Good Luck.
03-18-2011, 05:16 AM
stasio

Quote:

Originally Posted by chispy

NEW BIOS for P8P67 (1401) - P8P67-Deluxe (1502) - P8P67-Evo (1502) - P8P67-Pro (1502) Download links here: http://hwbot.org/forum/showpost.php?...&postcount=379 Thanks to Massman at Hwbot for the heads up :up:

Thanks Massman.:D
http://hwbot.org/forum/showthread.ph...870#post101870
03-18-2011, 05:37 AM
Asmola

Why cant they update support for Hyper-chip memory's?? Well, im going to get MIVE anyway..
03-18-2011, 05:54 AM
Sauron_Vie

1 Attachment(s)

@Asmola: :up:
03-18-2011, 06:35 AM
Brahmzy

Well, my week-old B3 Deluxe broke last night, dammit. I lost the PCIe x16_1 slot (top VGA slot).
I was getting a brief chirp the last few days whenever I'd power on the system or shut it down and it gave up the ghost last night.

I swapped vid cards and I get no action on that first PCIe slot - the second one works fine, although I still get a brief chirp. All power connections were/are fine.

If I have a card occupying that first slot, the VGA LED lights up red and I get no display.

Any idea what could've caused this?

Rig in Sig (top one)
03-18-2011, 06:41 AM
Asmola

Quote:

Originally Posted by Sauron_Vie

@Asmola: :up:

Very nice. I newer questioned that, but i just wanted to see how much voltage your sb needs.;):up:
03-18-2011, 07:32 AM
Sauron_Vie

1 Attachment(s)

thx mate ;) mine needs a tic more vcore for blend than linx. currently testing linx @5,2ghz :cool:

:edit and done : :cool:
03-18-2011, 09:27 AM
sunny7day

Hi, how to change multiplier in windows? I use 2500k
03-18-2011, 09:38 AM
LeetMiniWheat

BIOS 1502 changes:

1. fix the CPU/turbo ratio is wrong after clear CMOS
2. fix mouse cursor may be drift if there is a joystick plug in
3. fix that xhci legacy support function fail if there is another PCIE usb3.0 addon card on the system
4. Improve TPU's algorithm to bring better performance on some CPUs.

source
03-18-2011, 09:48 AM
Asmola

Quote:

Originally Posted by sunny7day

Hi, how to change multiplier in windows? I use 2500k

AI Suite II:welcome:
03-18-2011, 09:57 AM
danielkza

Quote:

Originally Posted by sunny7day

Hi, how to change multiplier in windows? I use 2500k

Open AI Suite II, select Turbo V EVO, expand More Settings, select CPU Ratio. It will ask you to reboot the first time you use it.
03-18-2011, 10:32 AM
Bullu$

Thanks again Chispy.
Will test it later on.

Quote:

Originally Posted by LeetMiniWheat

BIOS 1502 changes:

1. fix the CPU/turbo ratio is wrong after clear CMOS
2. fix mouse cursor may be drift if there is a joystick plug in
3. fix that xhci legacy support function fail if there is another PCIE usb3.0 addon card on the system
4. Improve TPU's algorithm to bring better performance on some CPUs.

source

1. fix the CPU/turbo ratio is wrong after clear CMOS
I have it with bios 1103 ,after clear cmos it does 103 x43 .
03-18-2011, 02:32 PM
chispy

Im going to try this new Bios 1502 for my P8P67-Deluxe and will post findings later , cpu is a 2600k

Show 100 post(s) from this thread on one page