Intel 4.5GHz & 5GHz LinX Stable Club

Printable View

Show 100 post(s) from this thread on one page

08-20-2010, 01:52 PM
andressergio

Quote:

Originally Posted by OC Nub

I gave this a try today, last night it failed at 1.408vcore after 15 passes. Think I can still get vcore a notch lower. 8 threads is giving me a hard time, the chip just runs hot so this is with ht disabled. I could have used more memory I guess.

i7-930 #3004B176, Gigabyte X58A UD7 bios F7j
http://img69.imageshack.us/img69/3784/4620930chip.png

Uploaded with ImageShack.us
http://img42.imageshack.us/img42/6955/4620pass.png

Uploaded with ImageShack.us

just awesome my friend :up:
08-20-2010, 01:55 PM
OC Nub

Thank you Sergio.
08-20-2010, 01:57 PM
radaja

OC Nub,another great run:up:
08-20-2010, 02:00 PM
OC Nub

Thanks radaja, very happy with this newer batch 930
08-20-2010, 02:03 PM
radaja

looks like a great batch
08-20-2010, 07:54 PM
CryptiK

Kickass run there OC NUb, nice job :up:
08-20-2010, 08:04 PM
kill_a_wat

Yes nice run OC NUB :D
08-20-2010, 10:37 PM
l0ud_sil3nc3

OC Nub killing it as usual that is probably one of the nicer 930's I have seen, very leet:cool:

What is the VID of that chip and the batch number?
Also is that on the UD7 or the R3E?
08-20-2010, 11:54 PM
Commander_HK47

Quote:

Originally Posted by l0ud_sil3nc3

OC Nub killing it as usual that is probably one of the nicer 930's I have seen, very leet:cool:

What is the VID of that chip and the batch number?
Also is that on the UD7 or the R3E?

Post quote says its his UD7.
08-21-2010, 12:36 AM
SimpleTECH

Hope this counts. Can't get past 195 BCLK. It's either the board or the chip. :shakes:

Core i3 540 [2C 4T] @ 4496.9MHz | 1.376 | MSI P55-GD85 | Water | 3944B043

http://img826.imageshack.us/img826/7...044971376v.jpg
08-21-2010, 03:38 AM
Daddyjaxx

Yippee...I'm in and it only took a 1000.00 CPU to do it. :).

http://img441.imageshack.us/img441/9221/42690295.jpg
08-21-2010, 04:49 AM
tool_462

@SimpleTECH: Try another BIOS or try to skip a bunch of bclk and go to something like 205 or 210 x 20 just to see, some bad BIOS have bclk "holes"

@Daddyjaxx: Nice temps!
08-21-2010, 09:28 AM
Daddyjaxx

Methinks my one side of the block isn't as tight as the other since the last three cores are 10c hotter. When I get around to it, I'll take the top off and screw them down a little better.
08-21-2010, 11:00 AM
OC Nub

Quote:

Originally Posted by CryptiK

Kickass run there OC NUb, nice job :up:

Quote:

Originally Posted by kill_a_wat

Yes nice run OC NUB :D

Quote:

Originally Posted by l0ud_sil3nc3

OC Nub killing it as usual that is probably one of the nicer 930's I have seen, very leet:cool:

What is the VID of that chip and the batch number?
Also is that on the UD7 or the R3E?

Thanks guys.

This was with the UD7, and batch# is 3004B176, VID is 1.1875

@SimpleTECH and Daddyjaxx, very nice run guys :up:
08-21-2010, 11:07 AM
puunakki

My i7 960 totally sucks :( Trying to get to 4.5ghz but i think it's impossible for me, now testing this:

http://pakka.dy.fi/~puunakki/index.p...Y2U3YThlODg4Zg
08-21-2010, 11:19 AM
OC Nub

Quote:

Originally Posted by puunakki

My i7 960 totally sucks :( Trying to get to 4.5ghz but i think it's impossible for me, now testing this:

http://pakka.dy.fi/~puunakki/index.p...Y2U3YThlODg4Zg

My 960 sucks also, havent seen many good ones at all, IDK what intel did with these but most of them oc like $hit.
08-21-2010, 11:33 AM
puunakki

Quote:

Originally Posted by OC Nub

My 960 sucks also, havent seen many good ones at all, IDK what intel did with these but most of them oc like $hit.

Yeah, I think I'll stick with this poor 4ghz. It's more than enough for me anyway.
08-21-2010, 12:36 PM
Hornetcup

980X@4567MHz 1.475V 6C/12T

【CPU】Intel i7-980X 3013A531
【M/B】Asus Rampage3
【Mem】Kingston KHX2000C8D3T1K3/6GX PC16000 Elpida Hyper MGH-E
【SSD】Crucial C300 Raid0

water-cooled

CPU： HK 3.0
2 rads

http://images4.hiboox.com/images/331...d4c84a9048.jpg
08-21-2010, 12:43 PM
Ccaution

Grats Hornetcup, but what's with the gFlops? I think I could do 54ish with my old q9550 and some d9 ddr2...
08-21-2010, 01:18 PM
donmarkoni

Quote:

Originally Posted by Ccaution

Grats Hornetcup, but what's with the gFlops? I think I could do 54ish with my old q9550 and some d9 ddr2...

It's a good thing someone else noticed it, as I don't want to be the only one to spoil the fun. :(
I don't want to underestimate others effort, but old linpack doesn't adequately stresses Gulftowns and passing 20 with those doesn't prove stability.
Today I did a quick test and running old linpack proved to be 8-12 deg.C cooler then new linpack. With old one I get 61-62 GFLOPS and with the new one 81-82 GFLOPF @ 4.2GHz.
So, 50 some GFLOPS is very strange... :shrug:
08-21-2010, 03:02 PM
facboy

on one of my tests at least (4.1 at 1.325 VCore) low gflops indicated instability...normally at 4.1 it should hit around 75 or so for me, but when it was unstable it would only hit 52-53 and the temps were very low (like 48-49), normally should hit 56-58. same binaries, i've been using the march 2010 one since the beginning. imo (and probably controversially), i don't consider 20-25 runs a proper test for 24/7 any more, i've had several bomb out on run 30+. i run 100 runs now, but i'm not going for glory runs, i'm after 24/7. i keep volts low (< 1.35) and temps are well in check (never more than 60). tbh ultimately 100 is prolly not enough either, if it passes 100 runs of linx plus 15+ hours of prime small FFTs, then i run it through pc mark and 3d mark, and after all that then i'd consider it 24/7 usable at about 50-100Mhz lower than that. this mobo/cpu/ram is warrantied (through shop) to run at 4.2, seems stable at that so i plan to run it at 4.1, maybe even 4.0.
08-21-2010, 03:34 PM
boldenc

Quote:

Originally Posted by facboy

on one of my tests at least (4.1 at 1.325 VCore) low gflops indicated instability...normally at 4.1 it should hit around 75 or so for me, but when it was unstable it would only hit 52-53 and the temps were very low (like 48-49), normally should hit 56-58. same binaries, i've been using the march 2010 one since the beginning. imo (and probably controversially), i don't consider 20-25 runs a proper test for 24/7 any more, i've had several bomb out on run 30+. i run 100 runs now, but i'm not going for glory runs, i'm after 24/7..

Not always low gflops indicates instability, sometimes you'll get low gflops just close and reopen program till you get correct gflops. To many have reported this issue and seems to be a program bug.
08-21-2010, 09:32 PM
l0ud_sil3nc3

here is a friend's i5 655k in a Gigabyte H55N USB3 cooled by a Venomous X w/ a single San Ace 120X30mm fan:up:

batch #: L009B514

http://i37.tinypic.com/rlgfav.png

once again tight timings on the memory FTW:up:
08-21-2010, 09:53 PM
l0ud_sil3nc3

also just found an error with my 920 submission

"l0ud_sil3nc3 | Core i7 920 [4C 4T] @ 4514.7MHz | 1.424 | Gigabyte X58A-UD7 | Water | 3949A372"

I had HT on:D
08-22-2010, 05:19 AM
andressergio

Quote:

Originally Posted by l0ud_sil3nc3

also just found an error with my 920 submission

"l0ud_sil3nc3 | Core i7 920 [4C 4T] @ 4514.7MHz | 1.424 | Gigabyte X58A-UD7 | Water | 3949A372"

I had HT on:D

A batch just like mine :) hope i can join soon :D

grats G :up:

Show 100 post(s) from this thread on one page