You can't RMA? Im wondering if I actually get a new board or if they will just try to repair it
Printable View
You can't RMA? Im wondering if I actually get a new board or if they will just try to repair it
For 12GB ram clocking, there is no board like the Classified.Quote:
Originally Posted by Peen
Otherwise, i'd take a decent look @ Asus Workstation boards. They're about the only thing i'd touch with 12GB of ram that has Asus written on it...
If that board revision fixes all issues with d0's and offers compatiblity with the newer models coming later on, I might kill my board just to get one XDQuote:
Originally Posted by sjakie666
Man sounds like all the X58 boards suck. Shoulda just sat this Gen out my Q9550 + MSI worked 100% flawless
:rofl: good joke... and the MSI... very good... you're killing me :ROTF:Quote:
Originally Posted by Peen
Quote:
Originally Posted by sjakie666
board has rev.aB01 = Rev aB01? Never saw a 4 digit code for DFI revision code.
Ok. After a long session of tests i could see that with 6 gb it's stable @ 2.8ghz, but if i increase the cpu frequency it's not anymore. No problems with 4gb. Going to RMA, i have to kill it before :shakes:
its been sometimes since i posted here
the new 07 bios is good
solved running 205 dram at 2050 C7 and 210 dram at 2100 C7
good job.
Anyone have any suggestions for 4.0? Turbo, no turbo? 19x or 20x? I'm at 3.6 HT ON, 1.15-1.16v under load, 1.3vtt. I still havent had much time to work on 4.0. Any suggestions would be helpful.
Yes I'm happy with 07/24 BIOS too, it is used in this run:Quote:
Originally Posted by cstkl1
@2110MHZ 9-10-9-23 1T HypePi32M stable :)
http://img199.imageshack.us/img199/9...rpi32m2.th.jpg
You should try with turbo:off first. Otherwise, usually you shouldn't need more tweaks for @4GHZ, just add more Vcore and give a shot.Quote:
Originally Posted by batmang
Does the 20x multiplier still cause random issues? 20x200 should be the easiest 4.0 correct?Quote:
Originally Posted by Sam_oslo
I had issues at 19x211, and 20x200 where games would be in slow motion even when running 4ghz according to RealTemp and CPU-Z. Right when I put it back to 21x191 it was back up to speed.
Now just gotta wait for DFI to "Repair" my board so I can blow something else up. Gunna try for 4.6ghz HT!!!
I got this annoying small things...
first, when OC or changing volts or anything, and it fails...during bootup or whatever, when i kill it (turn off with holding in powerbutton) and then right after, resetting cmos with dubble pressing reset and power, then letting go and then powering up again, it ALLWAYS, code 26, and i mean every single time, it doesnt boot up, everyting is started but just a blank screen, then i press reset, and it goes down, and up again with no trouble.
This is every time i do this...
and another thing, when in bios, after a fail OC or something, i load the saved bank i had before, and then i will apply this and exit, it just gets stuck, then i have to reset, and it goes down and are working again, what is this?
this is so annoying i almost want to change board =)
That sucks infa :( . You might want to RMA it honestly, it shouldn't be THAT touchy.
Try the latest Official bios or the latest beta. I had similar issues but the new bios'es fixed it. And if it already is one of those Bioses just try to reflash it. Sometimes it gets buggered up...Quote:
Originally Posted by Infa
@RGONE sorry i ment rev. aB(0)1. the 0 is crossed and they wrote a 1 next to it :S ( i've had rev.A58, 2x A56 and now the AB(0)1 )
i think DFI made a good board if it works. But when i search the net i come across lots of ppl who have (compatibility) problems.:(
I hope that DFI will find some solution for the problems.
I got Win 7, so the latest beta is all i got, or else multiple will drop and get stuck.... so i HAVE to use this bios nomather if i want it or not :)
I Like playing with bios'es, change and try stuff, but all us win 7 users are restricted to one version only.
Will try to reflash....but 26 is a major code regarding lots of stuff, so there's no telling what it could be either.
Eva2000
why cant you answer my private PM i send to you about dfi motherboard i brought
For anyone who has RMA'ed, did you get a new board or did they just repair your old board? Kinda want a new board because when mine worked it squealed soooo bad all the time.
But they said send it for repairs......
i7 920 4.3ghz HT off @ 1.288v
Corsair Dominator GT 2k C7@ 2050 7-7-7-20 1N @ 1.638v
DFI UT X58
Asus Matrix GTX285 SLi 728/1638/2821 Bios burned. (Optimized Ram timing) VGPU 1.15v/2.07v SLIed
Love this gpu and love the new bios
http://i287.photobucket.com/albums/l...ntitled-45.jpg
Are you still here b1tching about the board? It's getting boring really. :down:Quote:
Originally Posted by Peen
Any advice to kill my cpu easily?
You spend $300 on a board and one thats $170 is better and then it dies for no reason, kinda upsetting don't you think? And if it bothers you so much why read it?Quote:
Originally Posted by v0dka
Watch the attitudes folks.
Just a suggestion from your friendly neighborhood staff member.
Hey guys I just got this motherboard,and the bios is CONFUSING AS F***, I can't seem to do anything right... My rams are running at 1066mhz when it should be at like 2000mhz.
I don't get it, why can't this mobo be like the other ones where you just set it.. Please help !
I want my rams to run at 2000mhz, my timings i got. I don't know what 80% of the words mean in the bios where on the other mobo's they are easy. My head hurts.
In the BIOS, Genie BIOS Settings - DRAM Frequency. Can't get much more self-explanatory. This board has quite a few faults but the common settings being complicated is not one of them.Quote:
Originally Posted by stevensl2