Asus P5E3 Premium Wi-fi-AP

I would like to know if there was a newer BIOS than the actual last 0505 available for This Premium Motherboard.

Not on the asus ftp download site neither on asus global.

Any other place to look at ?

Thx

Same here...a new BIOS with some FSB and RAM improvements would be great.

Quote:

---

Originally Posted by JohnnyV

isn't it the 1T CR that is acting up?
I think it's pretty nice to get 2ghz with 1T.

---

1T vs 2T makes little difference in the stability over 2000 MHz. The board just isn't tuned for 2000+ MHz, but it can be done, with the right ram and lots of voltage.

Here is my last Spi1m for tonight:
http://images4.hiboox.com/images/370...095defbe24.jpg

CPU under water, NB ->air and memories -> aircooling too. Some 1.69vnb if i do remenber correct :) I've been changing that value soo much in a short time, but only between 1.65v & 1,73v

say any off u guy's tested bios coldbugs ???
seems here that the board coldboot's my cpu @ -100°C and CB @ (dont know if its board or cpu) -120°C .
also the chipset kicks out @ -20°C :(, idd a new or beter sayed modded bios would be nice .

Quote:

---

Originally Posted by blind_ripper

say any off u guy's tested bios coldbugs ???
seems here that the board coldboot's my cpu @ -100°C and CB @ (dont know if its board or cpu) -120°C .
also the chipset kicks out @ -20°C :(, idd a new or beter sayed modded bios would be nice .

---

Hi Blind ;)

If you are motorized, I have one week off and if you want, you an come arround here. I can test temperature only till -60°C so I can't say at all. No probs for me atm. PM me if interested ;)

i have cascade at home and ln2 if i want to;) , testing is not a problem.
yesterday the board whase acting strange :s , think it slakking :(

Quote:

---

Originally Posted by blind_ripper

i have cascade at home and ln2 if i want to;) , testing is not a problem.
yesterday the board whase acting strange :s , think it slakking :(

---

oki, nice, maybe we will arrange a meeting or so :)

Arff, too bad mine went dead yesterday morning, 'have to RMA it. I ordered a second one in case of..., it is simply my favorite board among all.

Cheers

Best fsb Super Pi 1m at this time: cpu ->water(h²o@20°C/nb->air(12cm) )

http://images4.hiboox.com/images/380...2ddad6597d.jpg

Best Super Pi 32m same conditions. I could try to set less Vcore, I wanted to finish it :)

http://images4.hiboox.com/images/380...fee908bcbe.jpg

Notes that I use the strap400 which is completely bugged with X48 boards and ram frequency is at the 5/8 divider: 976 instead of that 1016.

My bad, 2x cpu nail :shakes: :D

Nice bro...very nice :)

Quote:

---

Originally Posted by Monstru

Nice bro...very nice :)

---

Thanks a lot, these results are worth the effort :)

I absloutely need the CPU skew at delay 300 and the BN skew at normal to achieve this. No boot without them.

I can't finish one at 618 fsb with setfsb... Not exact in round all the time, do you think tweaking more these skews or I don't know what else might help?

WE NEED A NEW BIOS :D

http://images4.hiboox.com/images/380...68b1696b2c.jpg


151. SuperPi 32m - 9min 31sec 360ms - ToyTen (JMax-Hardware) - (Core 2 E8600 (3.33G... @ 4901mhz on h2o) - 9.8 points

wOOOOOt :D

We need a new, better bios :D

monstru did u test (see) any strange coldbug behavior ?

Unfortunately I didn't have the chance yet to put this baby to real cold. When I start testing this rig with LN2 I will report the behaviour.

Quote:

---

Originally Posted by ToyTen

http://images4.hiboox.com/images/380...68b1696b2c.jpg


151. SuperPi 32m - 9min 31sec 360ms - ToyTen (JMax-Hardware) - (Core 2 E8600 (3.33G... @ 4901mhz on h2o) - 9.8 points

wOOOOOt :D

---

3:5 divider no good~
If you run everest bandwidth, you know that~
3:5 divider show clock higher than 5:8 divider~
But bandwidth is same both~
That also need same dimm voltage~ :D

http://cfs12.blog.daum.net/original/...me=480032M.jpg

It is in deed the misreading of cpu-z and also Everest. It is well the 2/3 divider that's in use here. Strap400 gives me that since I am on X48 boards (Evo and Premium).
what is your vddr ?
I love your 32m score man :up:

Quote:

---

Originally Posted by ToyTen

It is in deed the misreading of cpu-z and also Everest. It is well the 2/3 divider that's in use here. Strap400 gives me that since I am on X48 boards (Evo and Premium).
what is your vddr ?
I love your 32m score man :up:

---

Thx, I like 32M running~ :D
bios set vdimm 2.1v~
Mem was CSX Diablo3 DDR3-2000 kit (D9GTR)~

hmm, good memories you have there :)

I had to sell my Evo 'cuz it was way to bugged under al tested bioses :( Premium accepts allmost all I ask.
me likes 32m too :)

bye

I did some 2 hours benching with an auto-cascade@-50°C average.

Queen mobo :p:
E8600
Cell Shock 12800 7-6-6-18
MSI OC 3870x2

3DM05:
http://images4.hiboox.com/images/380...7f0bbaeec5.jpg

3DM01: (not too good)
http://images4.hiboox.com/images/380...ee311f4646.jpg

Spi32m:
http://images4.hiboox.com/images/380...5fe01aa558.jpg

Spi1m:
http://images4.hiboox.com/images/380...d950052dab.jpg

Aquamark @ 5,7Ghz ddr3 855 cas7-6-6-18-1T gpu's not oc as above :( :
http://images4.hiboox.com/images/380...db489196b2.jpg

cpu-z@ 1.77Vcore:
http://images4.hiboox.com/images/380...4cfe67b964.jpg
valid cpu-z 1.47: http://valid.x86-secret.com/show_oc.php?id=418463

That was fun :yepp:

Nice ones bro :)

Good results~ :D

http://images1.hiboox.com/images/390...c314e136fd.jpg

Full air cooling PL9 on my P5E3 premium for 1,85v NB (Nb @ 76°c lol)

My i ask you to post your Bios Settings ?:up:

I'm having a boot issue. Every time I change a BIOS setting the system hangs.