Printable View
has anyone flash the maximus extreme with the rampage extreme bios?
maximus formula with the rampage formula works fine but maximus extreme with rampage extreme?
the 1102 bios is for q6600 very bad. back to 1007. that was the best bios for me. but i have probs with my g15 with this bios in games.
with the 1007 i can run my q6600 @ 8x450 an my corsair dominator 1800@ 7-7-7-20 24/7 prime stable @watercooling.
Yes you can flash maximus extreme with rampage extreme bios but you can not change volts.Quote:
Originally Posted by kowa1981
@simri
thanks! ! !
i canīt change any volts with this bios or only cpu or board volts?
but the rampage extreme bios works on the maximus extreme?
2 completely differant boards in this case , voltage regulation is not even remotely related , due to the 12 phase cpu 3 phase NB and 3V Fujitsu chips on the Extreme. Not worth the effort in my book i doubt you would see any gains even if you could adjust the voltages due to the huge variations in the 2 boards.Quote:
Originally Posted by kowa1981
New Bios out guess its just for E8600 support bios version 1104
http://support.asus.com/download/dow...Language=en-us
thanks REVHAD ! ! ! :up:
asus seem to have pulled the 1104 beta bios , i have it installed and it seem ok on here
wow how long was it up? I check asus daily and have not seen it.
ahh its still there but on another link http://www.xtremesystems.org/forums/...&postcount=850 i think it just has an update to the micro code to support the e8600
have anyone on his maximus extreme a ati 4870x2?
ich have big problems with this card. the system hangs in bios after 1min. furmark hangs on after 1min....
please help
been running 2gb of ocz pc3-16000 oc73p2000eb2gk @ 1761 with q6600 @3.97
but by adding another 2gb it wont post @3.6
tried 1004/1102/1104 bios
tried upping nb voltage to 1.71v
have you tried raising dram voltage
yes upto 1.94 (2v) actual
the evp on this mem is 1.85v
result
got it post @
440 fsb x9
3.97
1408 ddr3 @ 8.8.8.24
static readand trans boost disabled relax lev3
row refresh 110
nb 1.65v
been on ocz support forum
and its a ram limitation of 1500mhz with 4 sticks of ram with this board which is a bit disapointing
wonder if we'll get any newer bioses for maximus to improve fsb as the rampage seem to do 600fsb pretty easily with the e8600s whereas the maximus struggles at much more than 500 fsb
I wish I still had my screenshots of my E8500 (R.I.P.) had that sucker up just past 550 fsbX9.5 on my extreme, it's all in the GTL's and your nb volts should always be just a tad higher than your FSB termination volts and she'll fly up. Or are you talking about just on the E8600?
the max i ever had was on phase cooling which was 540fsb see the cpuz in my sig but anything above 520 and its flakey, wheras the rampage board is getting 600+ fsb virtually on auto settings and the rampage is x48 which is just a higher binned x38 so hopefully a new bios will unlock some extra fsb
Thats wierd but it dont surprise me much, at least with this board we dont have to deal the the p5q3dlx issues they have like 100 pages of problems and it's only a few months old. BTW can anyone tell me where the damn bios chip on this board is? maybe it's right in front of my face and I'm just not seeing it, but it is pissing me off trying to find it.Quote:
Originally Posted by GLENBOY
I've currently got BIOS 1001; and have been running my system with a 24/7 clock of 3.6G with a Q6600.
Later this year I hope to get hold of a QX9770; not sure if I'd need to update my bios for that, or will it run happily under 1001?
Hi all,
Bare with me on this as this is the 1st upgrade i’ve had in 3 years
Last week i bought.
Asus Maximus Extreme Intel X38
Arctic Cooling Freezer 7 Pro CPU Cooler
Intel Core 2 Quad Pro Q6600 2.40GHz (Meant to be able to OC at 3.30GHZ
Corsair 2GB DDR3 DHX 1333C9DHX Twin3
I have never overclocked before i want to try and achieve 3.20GHZ if i can as some games need it (according to Steam anyway)
Could someone tell me step by step how to do this!
Thanks Mp4
hey guys,
My friend just bought this motherboard.... it posts fine and boots up windows but when it goes through the "found new hardware" stage but then it locks up when it reaches "usb controller" Any help would be much appreciated!!
found this new bios out http://www.xtremesystems.org/forums/...76&postcount=1
installed on mine can't tell any difference still same max fsb , i thought some of the rampage extreme max fsb would have rubbed off but alas not but works ok at all same votages speeds as 1104
have anyone test 4x1gb corsair dominator 1800 cl7 on this board?
i have 2x1gb and i want to buy 2x1gb again to run 4x1gb on this board.
NB is sick....maybe you run 2x2gb if possibleQuote:
Originally Posted by kowa1981
I got 4 x 1 GB Cellshocks @ 1700 @ 7-6-6-15 for 24/7 standard.
If you want to get to 1800 u need "much" more Vnb.
And I realised that with the tighter timings the RAM-performance is even better than @ 1800 @ 8-7-6-18.