Maybe once the Nvidia driver is installed but I think 'safan80' is on about the ones u install the OS with with the F6 keyQuote:
Originally Posted by Scott C
Printable View
Maybe once the Nvidia driver is installed but I think 'safan80' is on about the ones u install the OS with with the F6 keyQuote:
Originally Posted by Scott C
Can someone with this board disabled all ide controllers and let me know if they show up in device manager?
Thanks to you guys I spent 2 days trying to find this board here in sweden... Guess what? Today I found one of the very few left. It was the last one they had in stock at Optimistic Solutions and they didn't think they would get anymore until february.... I haven't seen them in stock anywhere else either so I am pretty happy ATM.... :woot:
Without this thread I most likely would've gone for the A8N-Sli Premium... So thank you all... :D
There are still some bugs to work out on the board but congrats!! What's the weather like over there?Quote:
Originally Posted by koSmiQ
On a side note I just got my new 4400 X2 so we'll see if it will reach 3gig on the Mach II...
I can live with some minor bugs. I am not going to raid anything anyway so I will get past a few there...
Well right now there is about -7 degrees celcius outside, 10cm snow and today it rained (strange :banana::banana::banana::banana:, was about -4 when that happened, totaly wicked).
Now I only need my new X2 to get here and I will see what this baby can do for real... :D
Quote:
Originally Posted by koSmiQ
Brrrr.. Stick your pc out the window and overclock it.. :D New Orleans is still relatively warm. ~15C
When I lived in Alaska I piped in -50 air into my computer for supercooling. Pretty sweet. Could we say Mother Nature is the ultimate overclocker??
Anyone using the OCZ platinum 2 gig ddr 400 (2-3-2-5) kit on this board and if so does 1t work.
There looks to have been two new bios files uploaded to their FTP site, 1009 and 903.
No details that I can see, 903 is pretty well known now but first i've heard of 1009. Might have to give that a try and see if it fixes my raid problems!
Thanks,
Scott
...Quote:
Originally Posted by bigjohns97
I do, but I haven't pushed anything yet. Runs 1:1 at 220 just fine @ 1T with the 2-3-2-5 timings. There's an OCZ tech named Marcus that has this board too. There are a couple of posts by him at Bleedingedge. He has some other OCZ sticks running at 270.Quote:
Originally Posted by chew*
I also tried the recommended OCZ timings for this RAM on the SLI-Premium board ...2.5-3-2-8 as I remember...but like I said, no problems yet at 2-3-2-5.
U got a link for that ;)Quote:
Originally Posted by Scott C
Thx cisco greatly aprreciated as its cheaper for me to buy a board that supports this memory than take a chance on another 2 gig kit that will work on the abit at 1t or at all for that matterQuote:
Originally Posted by Cisco
Testing Bios 1009 right now, seems to be as stable as 703, no new features, just general default improvements. ECC is disabled, and the APM page isn't empty anymore. Prime testing @ 2.8Ghz right now.
No warm boot problems so far, at least it's on par with 703, testing higher speeds now.
Just found release notes for this and 903 posted on the ASUS boards...but NOT in the DL section. Posted by someone named "Doc"...trying to find out where he got it...probably translated from German--the German ASUS site always has it's :banana::banana::banana::banana: more together.Quote:
Originally Posted by HKPolice
Quote:
[1009 ]
----------------------
1. Fixed System MAC/UUID will sometimes lose when AC Power lost
2. Add AI tuner Option under AI Booster to set Auto or Standard
3. Support changing SATA/RAID mode individually in the Bios
4. Add new memory frequency of 216,233 or 250 MHz no matter memory SPD is(E series support only)
5. Hidden ECC DRAM Support option when DRAM Doesn't support ECC function
6. change OnBoard GLAN1 option "Auto" to "Enable"
7. Adjust PowerManagement Default/power on option
8. Show PowerManagement option at APM option
[ 0903 ]
----------------------
1- Support max CPU frequency to 500MHz
I just ordered this board from newegg.com and they still have some in stock Atm.
Just ordered mine too!
lol let me tell you that ive been trying to get this board for alittle bit now and i finally got one from the egg just 10min ago. i hope it works good with my tccd and fx55. well just have to see
Received my CPU from the US (Monarch) yesterday :)
http://img502.imageshack.us/img502/7...arge5sw.th.jpg
Stock cooling, auto memory timings and high 27 Seconds 1M Super Pi :banana:
http://img502.imageshack.us/img502/5...7sec0ff.th.jpg
Could anyone please inform me how I can make my Z503 Ballistix's memory timings better as it's not Super Pi 32M stable at the moment :slap: :(
I'll be playing with voltages soon and is this good for an Opteron? :stick:
Egg is out of stock now............
And I am signed for an In Stock Alert email, but none came. Thanks for nothing NewEgg.Quote:
Originally Posted by pcdoc1
Edit: In stock ATM @ Ajump.com for anyone looking still looking to score one. ~$20-25 more than NewEgg with free ground shipping, but $100-$300 less than eBay.
Geeez, I still don't know wtf is up with stock in the USA. Here in Toronto this board is in stock EVERYWHERE.
Yeah I don't understand why they can't keep a steady pace of stock. It's not like one component on there is not being produced or is really expensive to make. The A8N-SLI Del and Premium were both out in readily available quantities if I remember correctly.
And cheaper, eh? Can't remember last time a MB was cheaper up here...if it's ever happened.Quote:
Originally Posted by HKPolice
Here in Vancouver Netlink (NCIX.com) keeps selling out, but they ship to the US also--it's where I got mine... Anitec here also ships to US and usualy has it...
Demand is high but distribution for this thing is weird...like Fry's in the US had it first? What next, Best Buy? :rofl:
it took me 2 months to get the a8n-sli deluxe when it was first out a year ago.Quote:
Originally Posted by Nocturnal
whats you setup water or air? Also when kind of temps are you getting?Quote:
Originally Posted by Cybertronic