Pifast Benchmark

here is my score untill know , still burning in my new stuff ...



49.39sec


http://home.hetnet.nl/~froepie/Pifast%201.JPG



4068mhz @ 1.65v
mushkin level2 pc3500 @ 3v

My ranking seems ok but my new time hasn't been updated.
My new time is 54.48 sec instead of 54.72 sec.

corrected another lurgy induced mistake from last week :(

Good new i'm better now :)

However if you spot any others let us know i'll correct them
quick sharpish.

here is my updated score still burning in thath §§§§ everyday its going fast and faster....

49.19 sec

http://www.tutti-frutti.demon.nl/Pifast%202.JPG

I might as well post this one:

http://upl.mine.nu/uplfolders/upload1/pifast_59s.gif

This may or may not be the top air cooled result, Caprid I think had one better on an air cooled FX51 but he did not post it as he was onto bigger and better things :)

Shame I did not get below 50s but still I am happy with this

http://www.aocb77.dsl.pipex.com/pifastnew.jpg

that's 1:1 at 256 with the memory and the memory was at 2-5-2-2 !!!!!!!! It only did 220 in my 875i at 2.85v ..good old Corsair XMS PC3500 ..beats Mushkin level 2 into a :banana::banana::banana::banana:ed hat...

Regards

Andy

The new BIOS for K8V seemed to improve performance a bit, so far I've got 45.95sec at 263x10 1:1 2-2-2-6 1T

Yea ldt only makes difference in dragos =)

btw this junk 9800xt cant take AGP bus speed at all?? Wont even post at 235FSB on K8V

The highest I've been able to get 1M so far is 40s.
2.4c @ 3.42ghz

Quote:

---

Originally posted by zteve
Hi everybody,
this is using 2400+@2400(201*12)

edit: change a new picture, with better result

---

This has noting to do with nothing but why did ths person take my P4 picture and place it here (page 2) way back when?

Next issue, where do i find the Pifast benchie where the creen freezes so you can the snapshot?

http://alt.modlabs.net/pifast-4758.gif
Uploaded it at last... Hope Hexus will update me too...

im on the move again...1.70V and not quite good CPU contact

Ncie score JC, approaching half a second off your last score.

Have you topped 3Ghz yet at any point?


Regards

Andy

i can run 3Dmark car test at 3010 but not a whole run...1.70V just isnt enough hehe..CPU temp in BIOS was +3C which is not quite right...on the SK8V it should be -5 under load at least. It reads 10C higher than the SK8N :rolleyes:

I had a 41.48 which completed just fine but froze after that at 3006 MHz

http://users.pandora.be/JCviggen/pifast3009.JPG

Quote:

---

Originally posted by JCviggen
http://users.pandora.be/JCviggen/pifast3009.JPG

---

Damn JC..dat zijn zieke Mhzen!!

Pure Athlon power there! :toast: Whoah :slobber:

I need some tips on optimization for PiFast!!!!!!!!!!!!!!!
I should be doing better than this, right??

Thats great charlie, might as well stop there. ;)

You running dry ice again?

Quote:

---

Originally posted by FUGGER
You running dry ice again?

---

Yes, dry ice on the CPU and a new Baker18 R22 GPU rig....but 9800XT crashed and burned doing the green stripes and dots and dashes disease! SO I bench Pifast, lol

C

WAY TO GO JC............That's coooooolllll......... :D :toast:

charlie you're doing GOOD to M8.......Keep on.......... ;) :toast:

Quote:

---

Originally posted by charlie
I need some tips on optimization for PiFast!!!!!!!!!!!!!!!
I should be doing better than this, right??

---

When you run the pifast benchmark do you run at realtime priority or whatever it gives you ?

What happens of you run realtime ? You should knocks a couple of tenths off.

Regards

Andy

**** PIFAST ANNOUCEMENT ****

I ask this here before making my decision

I'm looking at taking a break from updating the PIfast
tables and I'm looking to see if anyone would be interested
in maintaining the PIFAST table?

When I started out it was Myself & M@TT for sometime now
it has been just me and i'm now at the stage where I'd like
to come home and not have to update the tables.

Plus I do not get the time to promote the Pifast Challenge as
I would like or even look into improving and converting over
to a more automated php system.

*The tables are just an MS-Excel file so you would need Excel

*Hexus supply the hosting for free as we use there Batch file as
the Standard settings for the PIfast Run as per how it was in the
days when Kain used to do the tables.

*You would Validate the submission prior to entry by making sure
it fits in the results allready received for the type of specs
supplied and to make sure the submission supplied is not created
with a newer version of PIfast I.e. 4.3 or incorrectly submitted
Series Computation time instead of Final Computation.

So anybody up for it?

I can understand that PMM :)

I hope someone can take over, not too many takers yet so far i see :(

To cheer you up, im finally getting close to 40s

http://users.pandora.be/JCviggen/pifast3032.JPG