As the Reds are designed for NAS use head parking is disabled.Quote:
Originally Posted by NEOAethyr
Printable View
As the Reds are designed for NAS use head parking is disabled.Quote:
Originally Posted by NEOAethyr
I have a better cpu now, so Im back on track.
Guys, when benching PSC on Ivy-E what is a safe benching voltage for the rams? I really dont want to pop an IMC.
:)
New bios working well.
old
http://i.imgur.com/U1cmLEo.jpg
new
http://i.imgur.com/13Vf9RQ.jpg
some R11.5
http://i.imgur.com/BtE3ouL.jpg
Very nice gains there.
Nice very nice and thanks for sharing these pics Dumo
Damn, is that 4960x still alive Dumo. Very impressive though.
Hmm...ok everyone. I know this has been beaten to death, but I just want to check up and make sure.
I picked up a R4G and a 4960X a few days ago. Just got done installing everything in a new box, and went to power it up. It never boots, but the power / fans do start up. The Q LED stops on the CPU light, and the post code says "00".
Am I another in the boat of having a board with an old BIOS and thus need a SB-E to get this thing to boot? Or do I have a bad CPU/MoBo?
Halp! KTHX...
--Skrips
Use USB Flashback to flash to one of the newer IB-E compatible BIOS versions.
So you think I am right? Cus the bot cycle just stops at the CPU according to the q led strip. that suggests to me that it is hanging on the cpu verification. I just hope I don't have a dead CPU....though I cannot remember the last time that happened.Quote:
Originally Posted by Shiranui Gen-An
I will try flashing the bios when I get home from work.
--Skrips
3000 tights on black board
http://i.imgur.com/dmExYk1.png
Quad BBSE
http://i.imgur.com/Tl60Y4M.png
Got any quad hyk0 results?
Hi Dumo,Quote:
Originally Posted by Dumo
May I know the voltage range for the ram on that run? Thanks...
No hyk0 kit to test, but board is capable to run any high scaling quad ram with good imc cpuQuote:
Originally Posted by NEOAethyr
2.25VQuote:
Originally Posted by maxxx
Thanks Dumo. Just got the R4BE and another 4930k. Hope this one is good...Quote:
2.25V
So benched the R4BE under LN2 the last few nights testing some S1 4960X's, here are some results:
Windows 8.1 was not the optimal OS, will revisit with W7 x64
http://i.imgur.com/Nuqw79f.jpg
http://i.imgur.com/mOjW2yz.png
http://i.imgur.com/OEs4aAM.png
http://i.imgur.com/fpg3xDx.png
http://i.imgur.com/6oFwubs.png
http://i.imgur.com/khf6OUs.jpg
Will post pics of the session shortly:)
I've noticed that a lot of Xeon chips are being listed as supported on the Asus P9X79 Pro board (assuming others as well). Anyone here have a Xeon chip on their X79 board? I'm interested in picking up an 8, 10 or 12 core chip...
Running an E5-2620 on a P9X79 board. Using it as a test server for ESXi. Its 6c/12t though.Quote:
Originally Posted by t_ski
pics. . .
http://i.imgur.com/PsAt0NI.jpg
http://i.imgur.com/krQxLeS.jpg
http://i.imgur.com/0L88x2l.jpg
http://i.imgur.com/oFAwahJ.jpg
http://i.imgur.com/BwSIcS6.jpg
http://i.imgur.com/krSqOUs.jpg
Sooooooooo nice benching full pot :D
Are those the cl7 2000Mhz Flares? Nice clean bench desk always... :D
2000 c9 actually.Quote:
Originally Posted by maxxx
@l0ud: thanks man!Quote:
Originally Posted by l0ud_sil3nc3
I did managed to get a pair of the c7 2000mhz but dunno their capabilities yet. Searching for a 2nd pair.
Also noticed you've taken off the heatsink for the vrm. Is that safe? or they are getting chilled from all that ice in the pot?
Anybody else?Quote:
Originally Posted by maxxx
Mem. tests psc/sams and bald 290
http://i.imgur.com/mIadb7Q.png
http://i.imgur.com/rsfAStn.png
http://i.imgur.com/pZ5AXaS.png