Today's Numbers: Get 'Em While They're Hot!

Printable View

Show 100 post(s) from this thread on one page

06-29-2008, 06:31 PM
Movieman

XtremeSystems 5,140,918
:up: Over 5 mil for as Sunday..I'll take that..
06-29-2008, 06:39 PM
road-runner

Quote:

Originally Posted by Movieman

XtremeSystems 5,140,918
:up: Over 5 mil for as Sunday..I'll take that..

http://www.theraptorpit.com/forum/st...t/clapping.gif:up:
06-29-2008, 06:39 PM
sierra_bound

Someone is about to be passed.
06-29-2008, 06:48 PM
Movieman

Quote:

Originally Posted by sierra_bound

Someone is about to be passed.

That one I can smile at..
As much as what easynews does to get contributers is a good thing overall I never considered them as one of the teams.
Teams are volunteers, not paid workers.
06-29-2008, 06:49 PM
SiGfever

Quote:

Originally Posted by sierra_bound

Someone is about to be passed.

I smell Roadkill. :D
06-29-2008, 06:55 PM
Movieman

Quote:

Originally Posted by SiGfever

I smell Roadkill. :D

yup, get out the bleach and the scrub brush to clean up the mess..
Go team 2ch!:up:
06-29-2008, 07:07 PM
MotF Bane

Two 45nm cores, finally available. Going to try to push past 4.0 during the week. Damned hardware failures have kept me from crunching for a couple of months. Must make up for lost time.
06-29-2008, 07:08 PM
road-runner

Quote:

Originally Posted by Movieman

yup, get out the bleach and the scrub brush to clean up the mess..
Go team 2ch!:up:

Yea I dont think the tide tire track remover will work this time....
06-29-2008, 07:31 PM
[XC] junglemaster

Excellent day again everyone :D
06-29-2008, 07:41 PM
Movieman

Quote:

Originally Posted by JungleMaster

Excellent day again everyone :D

Hello Mr. Aussie.. Is it winter down there now?:D
06-29-2008, 07:45 PM
twilyth

Quote:

Originally Posted by road-runner

Yea I dont think the tide tire track remover will work this time....

But it's like watching someone else bust open a pinata - it's not the same.
06-29-2008, 07:56 PM
Movieman

Quote:

Originally Posted by twilyth

But it's like watching someone else bust open a pinata - it's not the same.

Yea, agreed, BUT you write this down in a place where you won't lose it.
There will come the day when you login to the WCG team page it will say XtremeSystems at #1.
That you can take to the bank.
It will happen with some new people, some older guys coming back and some new technology.
I don't think this, I know it.:up:
06-29-2008, 08:10 PM
[XC] serlv

Quote:

Originally Posted by Movieman

looking forward to seeing what a Q9550 does in your hands..:up:

And your my friend?:confused:
Why don't you just paint a bullseye on my back and hand out the guns and get it over with!:rofl:

I'm upset with you cause you're telling me not to get a Yorkie. Sure, its' easy to tell me that when you're running two Harrys. You got yours'... And, here I just want one measly 9550 to keep me occupied til Nehalem. :rofl:

Besides if they focus on you maybe they won't see me. Trust me, I know what it is like to have a big bullseye on your back. I have my friend from the north of me bearing down on me like a ton of bricks. And then there are others; some of whom I'll be able to hold off, one of whom I most definitely won't.

So don't think you're alone with a bullseye. About the only one who is safe from that, at least from other teammembers, is Victor. Unless we have people with some major ( I'm talking monstrous, here :) ) delusions of grandeur! ... :ROTF::shakes:

Anywhoo, luv ya Dave. :p:
06-29-2008, 08:16 PM
[XC] serlv

Quote:

Originally Posted by loonym

I wouldn't be to quick to blame the chipset. I have 2 x3360's and they both hit a fsb wall at around 475 on air no matter what board I try them in and it looks like that's about the same ceiling Oldguy932 is finding.

That's why I want a 9550. I'm thinking 8.5 times 450, maybe 460. Would 475 be possible?
06-29-2008, 08:16 PM
Movieman

Quote:

Originally Posted by [XC] serlv

I'm upset with you cause you're telling me not to get a Yorkie. Sure, its' easy to tell me that when you're running two Harrys. You got yours'... And, here I just want one measly 9550 to keep me occupied til Nehalem. :rofl:

Besides if they focus on you maybe they won't see me. Trust me, I know what it is like to have a big bullseye on your back. I have my friend from the north of me bearing down on me like a ton of bricks. And then there are others; some of whom I'll be able to hold off, one of whom I most definitely won't.

So don't think you're alone with a bullseye. About the only one who is safe from that, at least from other teammembers, is Victor. Unless we have people with some major ( I'm talking monstrous, here :) ) delusions of grandeur! ... :ROTF::shakes:

Anywhoo, luv ya Dave. :p:

Ok, Go buy a Yorkie, that 9550 from you know who..It's a good deal and you have the boards there to try it in.
You now have my permission..BUT just one..The rest you save for Nehalem in the fall,.,:p:

Quote:

Originally Posted by [XC] serlv

That's why I want a 9550. I'm thinking 8.5 times 450, maybe 460. Would 475 be possible?

8.5x475 is 4038mhz.. You planning on buying a water cooling setup for that or do you think that 4000mhz yorkie is going to run nicely in that sauna you call home?:ROTF:

Guys, Scott lives in Vegas, a freaking dessert and his idea of nice house temps is mid 80'sF
That system on air in those temps at that speed would melt a hole through your living room floor!:rofl:
06-29-2008, 08:19 PM
[XC] serlv

Quote:

Originally Posted by MotF Bane

Two 45nm cores, finally available. Going to try to push past 4.0 during the week. Damned hardware failures have kept me from crunching for a couple of months. Must make up for lost time.

Rock on! Welcome back. Whatcha got going on? 2 45nm... Is that in one or two systems? Show us the beef!
06-29-2008, 08:22 PM
[XC] serlv

Quote:

Originally Posted by Movieman

Ok, Go buy a Yorkie, that 9550 from you know who..It's a good deal and you have the boards there to try it in.
You now have my permission..BUT just one..The rest you save for Nehalem in the fall,.,:p:

Ok. Thanks. Kiss. Kiss. :rofl: :ROTF: :rofl:
Now, if they guy will get back to me. Then again, it is the weekend...
06-29-2008, 08:25 PM
Movieman

Quote:

Originally Posted by [XC] serlv

Ok. Thanks. Kiss. Kiss. :rofl: :ROTF: :rofl:
Now, if they guy will get back to me. Then again, it is the weekend...

He is on daily and usually at night, he's west coast..
06-29-2008, 08:31 PM
[XC] serlv

Quote:

Originally Posted by Movieman

He is on daily and usually at night, he's west coast..

Nah. I've already talked to him...
I emailed the other guy. He hasn't gotten back to me.
06-29-2008, 08:32 PM
karl_eller

Quote:

Originally Posted by [XC] serlv

Rock on! Welcome back. Whatcha got going on? 2 45nm... Is that in one or two systems? Show us the beef!

Two cores = 2 cores, IE E8x00 ;) E8400, if I remember correctly *checks his emails*

Eller
06-29-2008, 08:33 PM
Oldguy932

Quote:

Originally Posted by loonym

I wouldn't be to quick to blame the chipset. I have 2 x3360's and they both hit a fsb wall at around 475 on air no matter what board I try them in and it looks like that's about the same ceiling Oldguy932 is finding.

I have it at 472, I might be able be able to do 475-477 rock stable, but I can actually boot all the way up to 489 into windows and run benchmarks. Something limits it though because its impossible to get blend to run at that setting with increased voltages or anything. Its as annoying as getting a phenom small fft's stable at 3ghz and then its impossible to do blend because the motherboard hates you.
06-29-2008, 08:41 PM
[XC] serlv

Quote:

Originally Posted by Movieman

Ok, Go buy a Yorkie, that 9550 from you know who..It's a good deal and you have the boards there to try it in.
You now have my permission..BUT just one..The rest you save for Nehalem in the fall,.,:p:

8.5x475 is 4038mhz.. You planning on buying a water cooling setup for that or do you think that 4000mhz yorkie is going to run nicely in that sauna you call home?:ROTF:

Guys, Scott lives in Vegas, a freaking dessert and his idea of nice house temps is mid 80'sF
That system on air in those temps at that speed would melt a hole through your living room floor!:rofl:

Oh, like those 8 Clover cores, sitting 3' from my left hand, running at 75-80C won't? It is nice in here. Temp set at 80F, reading 82F. Just called the temperature phoneline. It is 9:32 PM and 98 degrees, still.... ( SoaB! It was a hot day here! )

Anywhoo, what is one more overclocked quad gonna do? Make life unbearable? ...?

A friend of mine was over yesterday.
He was like "why don't you get that ceiling fan fixed?"
I was like "It works, I just forget to turn it on". I probably haven't had it on in over a year.
Anywhoo, it has been on since. It is nice to have some air movement in here. Feels cooler. Plus, it helps if I have a "plume" moment... :ROTF:
06-29-2008, 08:45 PM
Movieman

Quote:

Originally Posted by [XC] serlv

Oh, like those 8 Clover cores, sitting 3' from my left hand, running at 75-80C won't? It is nice in here. Temp set at 80F, reading 82F. Just called the temperature phoneline. It is 9:32 PM and 98 degrees, still.... ( SoaB! It was a hot day here! )

Anywhoo, what is one more overclocked quad gonna do? Make life unbearable? ...?

A friend of mine was over yesterday.
He was like "why don't you get that ceiling fan fixed?"
I was like "It works, I just forget to turn it on". I probably haven't had it on in over a year.
Anywhoo, it has been on since. It is nice to have some air movement in here. Feels cooler. Plus, it helps if I have a "plume" moment... :ROTF:

Remind me to only visit you in the winter..or I would melt..:rofl:
Ok, time for sleep guys..
Catch up tomorrow..:up:
06-29-2008, 08:56 PM
[XC] serlv

Quote:

Originally Posted by karl_eller

Two cores = 2 cores, IE E8x00 ;) E8400, if I remember correctly *checks his emails*

Eller

Duh. Yeah. Gotcha. Sometimes I forget there are non-quad CPUs... Isn't everyone's universe like mine, dagnabbit? :ROTF:
06-29-2008, 09:08 PM
karl_eller

Speaking of quads, I'm FINALLY getting my old motherboard back from warranty after 4 bloody months (with a free "upgrade" from a 680i to a 780i), so I'll hopefully be getting another rig up and running within the next 2 weeks. Probably stick my B3 on the 780i and a G0 in my main rig.

Eller

Show 100 post(s) from this thread on one page