info thread

Printable View

Show 100 post(s) from this thread on one page

08-01-2007, 11:50 PM
Klimpen

Quote:

Originally Posted by vld

I don't know why you people are having stability issues with F4B running 1230 mhz memory. Here as you see 40 minutes stable, until I stopped it.

(IMAGE REMOVED)

That is nice, how mych voltage on mem's and what mem's do you have?
I'm currently running Orthos blend to test my mem's at 1200 MHz. I'm on 32 minutes right now.
I'm running only FSB=400 right now because that is my 24/7 clock and I need to find out if my mem's can handle 1200 on a daily basis.
How come I get 8500 on READ and you get over 10000? What am I missing here. We have a very similar setup and using the same dividers (3.0).
We both have about 400 on FSB and I'm even using 9x for multiplier?
Do you have any ideas?
08-02-2007, 01:58 AM
zsamz_

love this new bios
i just got my motherboard back from rma lucky me too 6 days back n forth
on 450fsb i get 9700+ read
on 510fsb i get 10100 read the kicker is my memory only running 1000mhz lol
i'll do some 1200+ runs soon
08-02-2007, 03:45 AM
thezfunk

Does this board have 1T and 2T selectable in the bios? Can you chane between the two?
08-02-2007, 07:02 AM
Klimpen

Quote:

Originally Posted by thezfunk

Does this board have 1T and 2T selectable in the bios? Can you chane between the two?

THAT is a good question. I don't recall seeing the actual word 1T or 2T in BIOS.
It may be hidden under a different setting-name perhaps. Anyone know?
Maybe it can be set through Memset?
08-02-2007, 07:27 AM
lowfat

Quote:

Originally Posted by thezfunk

Does this board have 1T and 2T selectable in the bios? Can you chane between the two?

no i dont believe so. It doesn't even work with MemSet.
08-02-2007, 11:02 AM
zsamz_

funny my first board couldnt do 510fsb+ n my new board can do 560fsb
is this the new bios or just last board was deffective
loco we got the same board
08-02-2007, 02:31 PM
vld

whats the new bios you speak of? Do the voltages behave the same way? and what is the revision on it zsams?
08-02-2007, 02:41 PM
zsamz_

Quote:

Originally Posted by vld

whats the new bios you speak of? Do the voltages behave the same way? and what is the revision on it zsams?

its that f4g bios
my rev is 1.1
all i can say is i think my old board was deffective cause my old one never ran this fast
08-02-2007, 03:09 PM
vld

All I am saying is that I think you are bull:banana::banana::banana::banana:ting us or dreaming. Show me windows screenshots of that 560 FSB orthos stable... Also show the bios settings.
08-02-2007, 03:19 PM
zsamz_

1 Attachment(s)

Quote:

Originally Posted by vld

All I am saying is that I think you are bull:banana::banana::banana::banana:ting us or dreaming. Show me windows screenshots of that 560 FSB orthos stable... Also show the bios settings.

i did quikie for u lol i tried 600 no go
i gonna try my max n lol
08-02-2007, 03:25 PM
zsamz_

1 Attachment(s)

ok i will try more
08-02-2007, 05:01 PM
zsamz_

cant get past 577 need more volts:mad: :mad:
not worth it anyways performance not as good
how high can you get yours VLD?

i'm keepin mine @ 515 for now 10000+ read @ 1030mhz n 49.5 latency is fine with me
my old board would crap out @ 511fsb lol
08-02-2007, 05:11 PM
pokerezzet

Getting my GA P35 DQ6 tomorrow and would like to know what bios people are using with this board for best results.

TiA for your help
08-02-2007, 11:57 PM
Klimpen

Quote:

Originally Posted by pokerezzet

Getting my GA P35 DQ6 tomorrow and would like to know what bios people are using with this board for best results.

TiA for your help

Believe me, I have tried BIOS all week long and I say F5L is the best så far.
F4 came with the board and it was ok but many settings had no change since they were not implemented yet. Go for the F5L !
08-03-2007, 01:05 AM
Mysterfix

Quote:

Originally Posted by Klimpen

Believe me, I have tried BIOS all week long and I say F5L is the best så far.
F4 came with the board and it was ok but many settings had no change since they were not implemented yet. Go for the F5L !

Agreed :up:
08-03-2007, 09:52 AM
philgood

For GA-P35-DS3P users, I would recommend staying with F4 at the moment. I tried F5H for a week and it's not as stable as F4.
08-03-2007, 06:09 PM
xgodxicex

hey guys which ram slots are you using (color) when your overclocking your ram? I have mine in slots 1 and 2 (based on the 1-4 counting scheme) and i cant overclock my ram for the life of me....nothing at all...cant tighten timings, cant push to 900 with suggested timings from mushkin (that are supposed to give me clocks of 1000mhz) or anything
08-03-2007, 07:48 PM
zsamz_

Quote:

Originally Posted by xgodxicex

hey guys which ram slots are you using (color) when your overclocking your ram? I have mine in slots 1 and 2 (based on the 1-4 counting scheme) and i cant overclock my ram for the life of me....nothing at all...cant tighten timings, cant push to 900 with suggested timings from mushkin (that are supposed to give me clocks of 1000mhz) or anything

make sure you giving enough volts carefull gigabyte boards are overvolting
you should be able to do 4-4-4-12 @ 1000mhz
you better be active coolin the ram
your ram is warrantied upto 2.1v
08-03-2007, 07:53 PM
idiotekniQues

Quote:

Originally Posted by zsamz_

make sure you giving enough volts carefull gigabyte boards are overvolting
you should be able to do 4-4-4-12 @ 1000mhz

:rofl:

not the dq6 rev 2. p965

i get about a .1v droop under load with my quad. bios f11.
08-03-2007, 08:42 PM
xgodxicex

Quote:

Originally Posted by zsamz_

make sure you giving enough volts carefull gigabyte boards are overvolting
you should be able to do 4-4-4-12 @ 1000mhz
you better be active coolin the ram
your ram is warrantied upto 2.1v

see i get so discouraged, because even the guys at mushkin say i should be getting 5-4-4-12 @ 1000mhz @ 2.1-2.2v

im currently running my cpu at 400*9, and using the 2.5 divider to crank the ram to 1000mhz. I have my fsb at +.1 for my cpu overclock, and tried the mch volts from +.1 to +.3 with no difference. I boot to windows, run memtest and get a bunch of errors.

i even tried going 8*450 and tried running my ram 1:1 to get 900mhz, and this time couldn't even boot into windows....

i really dont get whats goin on
08-03-2007, 10:23 PM
vld

zsamz mine craps out at 500 I dont know whats up. I have a side vent fan blowing directly on to it almost. Maybe it's the CPU? It is hitting somekind of FSB wall. Even at multi 6, I cant get a stable 500 mhz FSB. I think it's the cpu. my cpu craps out at 3.4 ghz.
08-04-2007, 04:04 AM
Mysterfix

Quote:

Originally Posted by idiotekniQues

:rofl:

not the dq6 rev 2. p965

i get about a .1v droop under load with my quad. bios f11.

Hey bud, your in the wrong thread, this thread is for P35 chipset only.:) There is a thread for the P965 boards also, I would suggest looking in there because what we tell you may not be true for your board.:shrug:
08-04-2007, 04:09 AM
Mysterfix

Quote:

Originally Posted by xgodxicex

see i get so discouraged, because even the guys at mushkin say i should be getting 5-4-4-12 @ 1000mhz @ 2.1-2.2v

im currently running my cpu at 400*9, and using the 2.5 divider to crank the ram to 1000mhz. I have my fsb at +.1 for my cpu overclock, and tried the mch volts from +.1 to +.3 with no difference. I boot to windows, run memtest and get a bunch of errors.

i even tried going 8*450 and tried running my ram 1:1 to get 900mhz, and this time couldn't even boot into windows....

i really dont get whats goin on

Give your vcore a little more juice and see if that helps, as strange as it sounds it worked for me.
08-04-2007, 04:49 AM
xgodxicex

sounds good, ill give it a shot when i get back from work
08-04-2007, 04:54 AM
zsamz_

Quote:

Originally Posted by idiotekniQues

:rofl:

not the dq6 rev 2. p965

i get about a .1v droop under load with my quad. bios f11.

you not in the 965 chipset thread :rofl:

Show 100 post(s) from this thread on one page