thanks, what is a safe max voltage on this cpu if my max temp at load now is between 33-35c?
Printable View
thanks, what is a safe max voltage on this cpu if my max temp at load now is between 33-35c?
you can try up to 1.5v actual voltage...you might have to push the other voltages up to support higher FSB, like: MCH, CPU vtt, DDR, DDr2 vtt and ICHIO.
^Check temps on VRM, CPU, and NB
Agreed 1.36 is not much at all push 1.45-1.5 if temps are ok but i see custom wc in your sig so shouldnt be a problem = )
Quote:
Originally Posted by Ace-a-Rue
Just for infomation purposes:-
The links to the ftp servers for downloading the Bios ID: 11 (Latest Official Bios) have now all been fixed:- So basically if you go onto this website clicking on the Asia/Europe/US now works http://www2.abit.com.tw/page/uk/moth...pPRODINFO=BIOS I sent the webmaster a couple of e-mails.
The following directory on the ftp servers will hopefully be removed bios/qb9quadgt/ as that was the typo error directory it was created to in error.
Hope that makes sense.
any improve on the memory department with new bios? please tell me yes :)
None what-so-ever for me. I still can't pass around 530mhz and I KNOW my ram is capable of more. :(Quote:
Originally Posted by Ajfina
-Collin-
EDIT: They this bios adds "Enhanced overclocking" and I have found no such luck. Where as before on the beta bios, 450x8 was completely stable, it now freezes as my windows is loading. I am extremely frustrated with this board. Maybe I got a bad one? I see people hitting 500fsb no problem and I cannot, for the LIFE of me, get near that. I've tried upping all available voltage options in bios with no luck. I know damn well my ram can do 500fsb. I know damn well my processor can do 3.6ghz. It is just so frustrating that a motherboard is what ALWAYS holds back my overclock.
I'm buying the DFI. Enough with this piece of junk. At least I know DFI engineers are working hard to make overclocking motherboards, not boards that disappoint. Hell, my USB ports don't even work on this board. Thumbs up Abit.
-Collin-
Just installed my new G.Skill BHZ memory. Hope I can get over 480 now.
My result with QuadGT
E6600:
4275MHz watercooled
475X9 @ superpi1M
http://bbs.ocqq.com/attachments/foru...CD4VSWRhgp.jpg
500X8 @ superpi1M
http://bbs.ocqq.com/attachments/foru...TfnI2insYm.jpg
445X9 @ superpi32M
http://bbs.ocqq.com/attachments/foru...CJ4zq8EOeJ.jpg
500X8 @ Superpi32M
http://bbs.ocqq.com/attachments/foru...41EOuUjWXE.jpg
Quick Test of RAM stability,
DDR1000 CL4-4-4-4, 2.16V, memtest 100% passed
http://bbs.ocqq.com/attachments/foru...xaJlNrHglA.jpg
DDR1100 CL4-4-4-4, 2.44V, memtest 100% passed
http://bbs.ocqq.com/attachments/foru...kMhrUCqbo3.jpg
Stability and temp. test of 24/7 setting, 400X9
http://bbs.ocqq.com/attachments/foru...Dxgt9qsImQ.jpg
FSB topped out at around 510MHz for benching only :)
seemed a lil slow maybe unstable :( the suicide run did
grwwww:mad: still can't get past 480fsb! vcore 1.475 mch 1.7 ichio 1.7 I should have stuck with Asus.
hey guys figured i would post my stable (so far) setting using the B08 bios, havnt tried the new released version yet
http://<a href="http://img135.images...ablell7.th.jpg[/IMG]
Shouldn't need but 1.65V at the most to go reach 500fsb.Quote:
Originally Posted by 426hemi
http://img139.imageshack.us/img139/9156/aqua10abp9.jpg
426hemi: I have problems passing 500MHz so you are not alone... :( When setting 500MHz I usually get bluescreen after 5-10 seconds, 498MHz FSB is very stable though:
http://www.myllan.nu/foto/albums/use...mal_236854.JPG
Also, I cannot read temps lower than zero. How do I solve that? Guess waiting for a new BIOS...
im able to do 515FSB and some times i can do 525 (depending on mobo mood :) )
here
My problem exactly. Frustrating.Quote:
Originally Posted by 426hemi
-Collin-
Well, I tried the Noctua and the HR-05 chipset coolers now. They gave me maybe 15-20MHz stable higher FSB. 498MHz is still max. :( With stock cooler I was limited @ ~480-485MHz stable.
520fsb
What NB-cooling do you use? (you might have written it before but my internet is slow I do not have petience to search. ;) )
U asking me?Quote:
Originally Posted by blossa
i use stock heatsink but changed the thermals paste for AS5 and removed the plastic also have a coolermaster tiny fan attach to it , i think AS5 helps a lot and removing all the crap in between NB and heatsink and same with PWM
which beta bios are you referring to?Quote:
Originally Posted by NinjaZX6R
does anyone's bios still say v1.x(10) in cpuz when using the new official bios?
MAX FSB Abit Quad GT Single Channel
[URL=http://imageshack.us]http://img518.imageshack.us/img518/1...ngleramrm3.jpg[/UR
http://valid.x86-secret.com/show_oc?id=183517
MAX FSB Dual Channel 1mb Pi
http://img510.imageshack.us/img510/4...b565mhzfj3.jpg
11m 40,219s / SPLMANN / Intel Core 2 Duo E6700ES B1 @ 4509 MHz / VCore @ 1.71V / FSB 501MHz / 2*1024MB Balistix 667 MHz 4/4/3/4/ Kokü
http://img399.imageshack.us/img399/7...bildlc9.th.jpg
nVIDIA + Dualcore + non SLi
splmann - 237188, - E6700ES@4509Mhz- 2x1 GB Crucial Balistix 4-4-3-6 -2T-501Mhz - Leadtek 8800GTX @ 671/1105 - FW97.92
http://img468.imageshack.us/img468/8...7188ax9.th.jpg
Regards
SPLMANN
Wow!:eek:
My CPU is holding me back now. I looking for a Retail CPU because a ES CPU is not so fast as a Retail .