^^^
I have a similiar running Sandy... Does SuperPi1m at 1.44 - 1.45 vcore at 2803mhz (166 divider u.u) SuperPi times arent great, but the CPU has more potiential I think, the PO did 2750mhz on a BT with the slow fan, IHS removed btw. :)
Printable View
^^^
I have a similiar running Sandy... Does SuperPi1m at 1.44 - 1.45 vcore at 2803mhz (166 divider u.u) SuperPi times arent great, but the CPU has more potiential I think, the PO did 2750mhz on a BT with the slow fan, IHS removed btw. :)
Anyone out there have or seen any CABGE 0526FPAWs?? My brother just got one the other day, and just curious if anyone has seen any good results with this or similar stepping, thanks.
well i recieved my 4000+
DAA5BN KABYE-0538-GPMW... SH-E4
@ 2.933
1.56v
41c load
pi 28.797
voltage limited ....it wants some more volts, but im limited with the motherboard to 1.45+9.9% shows 1.55-57 in core cell and cpuz.
i believe this will do 2.95 with a little burning in.
Flash
VoodooProphetII
- Where'd you get that background from?
I wanna see the whole thing without the overclocking info screens spoiling the view.
Since this is the San Diego thread maybe someone has any information about this stepping:
KAB3E 0548BPMW
A search turned up nothing so therefore I ask... Any input appreciated. :)
http://www.forumdeluxx.de/forum/show...34&postcount=1Quote:
Originally Posted by koSmiQ
http://img.techpowerup.org/060111/3gig842.jpg
http://img.techpowerup.org/060111/cpu-clean569.jpg
not really optimized ... i think it will run 300x10 - 1,48-1,49
i just received my SD 3700+ (KAB2E 0549 EPAW). I read alot succesful SD OC stories, but i'm a little bit dissapointed in mine. I can't get it Prime stable @ 10x300 @ 1.7v. This is on WC. Load temps go in the 50s, so the chip runs rather hot. Also, i have massive problems with the 10x and 11x multiplier (BSODs, program crashes etc.). Alot of users have multiplier and divider problems. Is there a way around this?
3700+ San Diego, 1.54V 2860mhz @ Boxed
2*512 BH5-UTT
DFI Ultra-D
26min 38sek
http://img206.imageshack.us/img206/3...nter0048uz.gif
with no tweaks or realtime-priority.
OR
With some tweaks & realtime-priority:
http://img415.imageshack.us/img415/4...nter0059nf.gif
Time is: 25min 49sek :)
Jolli :)
3700+ San Diego
KACAE 0547RPBW
http://img297.imageshack.us/img297/4360/32m29150ud.jpg
http://img69.imageshack.us/img69/7343/prime22zq.th.jpg
Does anyone have any info about
KAB3E 0546GPAW
Google doesn't return anything useful..
Any help would be appreciated :)
stepping?
How do you Germans get the best CPU? Well good show :toast:
And what is it? I'm guessing the old week 47 KAB3E? I have 2 week 47 Opterons and they're both stable past 2.9 Ghz on the stock cooler, so week 47 SD cores obviously own.
(DIRECTED AT THE PERSON BELOW ME, FORUMS ARE SCREWING UP POST ORDER)
3 Ghz mit 1,296 Vcore:
http://img77.imageshack.us/img77/282/3ghz6qf.th.jpg
3,1 GHz mit 1,376 Vcore:
http://img64.imageshack.us/img64/5361/17ll1.th.jpg
3,25 GHz mit 1,52 Vcore:
http://img54.imageshack.us/img54/2716/5330ak.th.jpg
Go for Germany ;) Watercooled, but wait for Stonka his CPU, we will se 3,35GHz on Water soon...
Anyone here tested this stepping under phase change?
KAB2E 0547DPHW
Does it coldbug?
I was wondering whats the max safe voltage to use on a 3700+ on air.
depends on what aircooler you got. Personaly I wouldn't go higher as 1.55V 24/7 on air.Quote:
Originally Posted by GOTFrog
I've got a XP-120 with a med CFM panaflow
Quote:
Originally Posted by elh4jj4j
which stepping do you have? wow !!!!
KAB3E 0547GPMW and it's mine now :banana:Quote:
Originally Posted by kosmonova
Hi guys,
Does ~50'C meet the criteria as a high load temp with the Big Typhoon and San Diego 3700+ @ stock voltages? Yeah, I thought so too.
I’ve tried re-mounting the heat sink three or four times, I’ve tried different types of thermal grease and BIOS, I’ve even slaughtered/modified my Sonata case for maximum airflow.
Other temps in my system under full load (Prime95 20 hours) is as follows:
Motherboard – 30/32’C
Case – 30/32’C
GPU – 48’C
Hard-drive – 28/30’C
The CPU’s idle temp is 28-30’C, but at the very instant it’s put under stress it skyrockets to 48-50’C… and well, that sucks!
Wanna try out its OC potential, considering it runs stable on stock voltages (Prime95 20 hours) @ 2,8 GHz.
Ideas? Anyone else suffering from these annoying temp-variations?
i just ordered myself a 3700 from newegg for my birthday, gonna test it out con my xp-90 and 92mm panaflow. What stepping has been coming out of newegg recently
I'm looking to upgrade my system to finally go S939. For right now, the SD's are priced very nicely for the best performance/price point. I will be overclocking this cpu. On Newegg, they are showing 2 SD's. The "older" Rev. E4 and a newer Rev. E6. Besides running on less voltage and runing cooler, does the Rev. E6 overclock better than the E4 ?
I have tried searching, but everyone here seems to have the Rev. E4. I will be using air cooling (TT-BT).
Thanks.
I'm getting tired of this crappy 3700+, only does 2950 @ 1.71v barely 1m stable.
Do you think any more volts would help me getting 3G?
And btw, there is no way a computershop can find out that I have overclocked my cpu right? If I kill it :--)