excellent news :)Quote:
just found out how to get past this 232Mhz Abit limit
can you use 1/7 divider now?
Printable View
excellent news :)Quote:
just found out how to get past this 232Mhz Abit limit
can you use 1/7 divider now?
Macci,Quote:
Originally posted by macci
excellent news :)
can you use 1/7 divider now?
I will try tonight. You menitoned clockgen shows the divisor, but when it ran it did not show this, just the cpu multiplier .. is there another version or am I misunderstanding you ?
Without having something to show the divider and because i am using an nvidia card which will do 100Mhz AGP the only way I will be able to tell is to see if the hard disk corrupts. It is a Western Digitial 8MB 7200rpm .. what sort of Mhz do these go to before having problems ? 40? 43 ? 46 ?
As I have just managed to get it stable at 240x10 I will try tonight to see how far the FSB will do at x8 multiplier and also with memory at 5:6.
I'll have OS CD to hand just in case it is a 6 dividier max and my files all disappear :)
Regards
Andy
http://fugger.netfirms.com/pi5.jpg
4.352Ghz 272FSB 5:4 2522
WOW fugger ..
4.352GHZ... This must be the fastest pc on earth :-D
anyway nice PI!
he put 4.352 not 4,352 ... american notation you knowQuote:
Originally posted by bias_hjorth
4.352GHZ... This must be the fastest pc on earth :-D
ahh sry then...
Still can't seem to test this .. UGURU puts up the speed as much as you want perfectly until your cpu reaches it's limit at 10x but then changing multiplier with clockgen UGURU then allows the speed to be changed but CPU-Z shows the cpu is running at what it was before, so it is a catch 22 situation.Quote:
Originally posted by macci
excellent news :)
can you use 1/7 divider now?
Nice 310FSB speed by the way, what board was that on ?
Regards
Andy
Took 0.38 sec off this week. Pretty happy with my time now :)
http://www.fewture.cistron.nl/pifast/53.42pifast.JPG
NF7-S
Barton 2500+ (0324 TPLV)
KHX3500 CH-5 (2x 256)
CWT 380W
Vdimm mod / 3.3V mod
Watercooled (custom Maze3, custom chipset block, blackice xtreme 2)
Ok, another one for Holland :)
Just installed my new 3.2c
Still testing and the Arctic Silver 5 still needs to settle but it's very promising so far.
a 49.22.
Finally broke the 50s barrier.
mem 209mhz 2.2.2.5 turbo
More to come...
From Holland too :D :
http://home.planet.nl/~verbe635/pifast6.png
AMD Athlon XP 1800+ @ 2620 MHz
Vdd modded Epox 8RDA+ (rev 1.1) @ 227 MHz fsb
2x 256 MB Twinmos/Winbond CH-5 @ 2-2-2-11 @ 2.9v
Sorry to bore you people, just have to post again an update :)
I'm getting more and more happy with this new cpu.
so far 4250mhz pifast stable with 1.75v. Mind you, run with a just started up prommie so nice and cool, which makes a difference of I guess some 6 degrees on cpu temp compared to after an hour or so running.
Just the fsb is higher, the rest same as before.
mem 5:4 2.2.2.5 GAT turbo
more to come....
looking great... btw. very nice bike!
Thanx
I like my hobbies
Well, otherwise they wouldn't be hobbies I guess :)
Noone else posting here in this thead?
Ok, I'll do it then :)
As far as I know the fastest published pifast time for Holland.
See above for specs, just 1mhz more fsb and .025 more vcore although I doubt that made a difference.
Update done, soz for update delay me has lurgy :(
47.58
P4EE @ 4230 (302x14), 5:4 2-5-2-2, P4P800
Sorry no screenshot for now - pic is left on benching rig;) If somebody need a proof then i'll post it tomorrow.
FUGGER
Hmmm. I think that ~200 MHz have to give you more than 0.5 second... Strange... Maybe due to your lower FSB?
lol... Just checked - it is #10 in Hexus ranking... Maybe now i HAVE to upload that pic tomorrow:)
ALT-F13, you need a Canterwood mobo with that EE I think.
Because I think there is much more in that proc of yours. Either that or the extra cache doesn't make too much a difference in Pifast.
:( sorry lads not sure when next update will be
made a bit of a home goal, installing latest
Nforce drives on my shuttle (Developement machine)
the one I use for PIfast.
New drivers have borked it :( even safemode re-boots after
a few seconds :(
P.s ALT-F13 if you could post a screen shot it will save me
time Emailing you for one ;)
PMM:
I'm on the list, but no ranking..? Should be 42nd.. :rolleyes:
If it's the pifast version.. It is the same, only a different name of the bat file. We use it on another dutch pifast contest here: http://pifast.tweakers.net/ :)
It is the hexus bat, only renamed..
Hmmm, there goes my 2nd place now you revealed that :(
:)
with what kind or cpu and what kind or volt's ?Quote:
and what are your prommy r507 temps ?
LOL sorry flu induced c0[kup on the last upload I forgot toQuote:
Originally posted by Fewture
I'm on the list, but no ranking..? Should be 42nd.. :rolleyes:.. [/B]
regenerate the ranking numbers in the spreadsheet.
It will correct itself once I sort out my PC problem:(
Again sorry to all for the lack of updating, but I have only
1 machine with the MS-software on and its that one I
borked installing new NVidia drivers.
Business as normal
Updated :)
Was not drivers after all :banana: turned out to be faulty solder
joints on my ATI card for power connector, just happen to occur
same time as installing latest Nforce drivers spotted by chance
bit of soldering all good again thx god :toast:
PMM, glad it's ok again.
But no reason to say sorry. You are doing a great job and noone is paying for it so noone can give bad comments either :)