thats a nice cpu you got thereQuote:
Originally Posted by yankee
Printable View
thats a nice cpu you got thereQuote:
Originally Posted by yankee
Thanks, zsamz_
Heres a few more, the first is 32m@2.35, the second is 1m @ 2.5.
http://www.hwbot.org/signature.img?iid=111348
http://www.hwbot.org/signature.img?iid=111345
This ram is teh awesome! :up:
nice
better than some e8400s lol
hellpp me :confused:
why my ballistix tracer can't get 1200 with cl 4-4-4-12 :(....i even give it max vdimm in my board....somehow its hard to enter windows..
is it my ram is already damaged ??
thx
well 1200mhz @cas 4 was hard for the old sticks and not possible with the new single sided revision.Quote:
Originally Posted by anubis_is_evil
you need to post more info, like what kind/how much of ballistix you have, MB, & what your max vdimm is, etc.
i used double sided Gen, :) i have 2x1gb 8500 ballistix tracer...Quote:
Originally Posted by Gen
cause i can get no satisfied with cl4 so i tried cl3, here you go..
http://valid.x86-secret.com/show_oc.php?id=356364
with 2.95 vdimm...:)
dang... 2.95v! *squints eyes* 1000mhz cas 3 looks good!Quote:
Originally Posted by anubis_is_evil
maybe you can reach 1400mhz can 5 :D
Nice results you got out of that kit! Though 2.95volts is really asking for trouble, but I guess you know that. Then it's even more impressive to use that vdimm. ;)Quote:
Originally Posted by anubis_is_evil
What revision are they? 16FDx?
haha, crazy enough huh :D, agreed to the people that said "god bless the ballistix" :DQuote:
Originally Posted by Gen
for cl5, this what i can get meanwhile
http://valid.x86-secret.com/show_oc.php?id=356825
with vdimm 2.49
thx Don_Dan :) the revision is 16FD3...Quote:
Originally Posted by Don_Dan
yup, i know 2.95 vdimm maybe can sre* this sticks up, it's always a first time...
with dfi lp lt x38 only have max vdimm 2.95 thats why i stop, perhaps if i can get higher freq i'll pushed it further.... :yepp:
here the ss..
http://i10.photobucket.com/albums/a1.../Capture_7.jpg
Hell Yeah,515 3-3-3-8, 675 4-4-4-15.Voltage is the max that could be given through BIOS,and that is 3.0v.On my Lanparty LT P35-T2R.
damm ! :D alex-Ro how you do that ???Quote:
Originally Posted by Alex-Ro
i even can get 600 Cl4 stable in maximum vdimm ...:( poor sticks..
my sticks dont like cas 4 i tested all 4 of themQuote:
Originally Posted by anubis_is_evil
but they go crazy on cas5 me i've only pumped 2.24 in them lol not as brave as you
mine can do 1240 2.09v /1300 2.24v
i hope you got a fan on those ;) micron not makin those chips no more
see if you can run pi at that speed, alex. Also, what does memtest report for bandwidth at those timings?
Either way, that's a great result! My board only goes up to 2.55 vDimm, and no NB vCore adjustment.
What did you set nb vCore to?
My RMA just got back to me today. I sent off 2x1Gb 8000's and 2x1Gb Tracer 8500's, both old double sided D9 kits, which until they died, worked well as a 4Gb kit at 4-4-4-12 1000+.
What I got back: A double sided set of 8500's, and a single sided set of Tracer 8500's. :( I'm just about to put 'em in, but I know it's not going to work how I'd hoped.
Just RMA'ed my second kit of 8500's and they said they are sending me single sided... we'll see how they fair but I am already very tired of how often these things die, might just put them up for sale as soon as I get them.
Ive just put all 4 sticks in together, and already it's not looking too promising. I finally got a boot at 5-5-5-15 @ 945, 2.1v.
lol i havent pushed my ballistix past 2.24 yet
i can do 1200+ with 2.03v:D
965 chipset is before my time, is the mobo a limiting factor?Quote:
Originally Posted by zarathrustra
I have 1 single sided set and 1 double sided set in a rig atm and they do 1000mhz @44415 2.0-2.05v depending on trfc.
Well, im posting again because one of my sticks just died on me. I was running them at 1028mhz, at 2.15v. The system gave a pinstriped output on the screens, and stopped responding. I hard rebooted, and it refused to post. Long story short, I got 1 stick to work in slot #1, then tried adding sticks into slot 3. 1 stick failed, and the other two worked fine. So I guess Ill be doing another RMA. This will make the third set I have had to RMA. Im with the guy who posted a little way back.. I might just sell the sets as soon as I get whatever I get back. Im tired of RMAing parts every couple months.
finallly ! after i switch my board into DFI LP LT X48, my sticks can easyly trough 1200 CL 4 with 2.6V, :D but in again i try pushed it harder into 1240 CL4 and went stabil on 2.73V with SPI 1mb..
heres the SS
http://i10.photobucket.com/albums/a1...Capture_15.jpg
the validate http://valid.x86-secret.com/show_oc.php?id=361200
thinks my ram gone stupid but it's still rocks ! :D damm i loved my sticks !:D
Very nice :up: Congrats on the 1200mhz cas4. Scary vdimm though :D
Ballistix pc8500, double-side, no clip rev.
SPI 32M@600 4-4-4-4
Vmem 2,52V bios set
Really nice ram, not so good at cas5, but fantastic at cas4
http://www.pctunerup.com/up/results/...01150314_1.jpg
They go very well on Cas 5,but there is a lot to tweak in the Dfi board to be able to:
710 mhz 5-5-5-15 Validation:
http://valid.x86-secret.com/show_oc.php?id=341992
And of course they go very, very good with CAS 4 too :)
http://www.xtremesystems.org/forums/...1&d=1207688552
and my sig too ;)
Nice Monstru, vdimm ?