Pifast Benchmark

Printable View

Show 100 post(s) from this thread on one page

10-21-2003, 02:42 PM
CodeRed

Quote:

Originally posted by LORD
Just to illustrate a bit of good ol' socket A potency. It's a bit behind the FX's and others but what can ya do. :D

Nice going there buddy.
Keep that torch burning brightly :)
10-22-2003, 12:23 AM
LORD

mkleingeld,

My trusty Abit nForce2 +OCZ 3500 with special Barton XP. Of course R404 Vapor phase cooled. :)

CodeRed,

Thanks buddy. I'll try and turn up the brightness or is that voltages a little more. Still have a fair bit to play with actually. :D

LORD:)
10-22-2003, 12:38 AM
gabbax

Hehe

Do i dare to post my result here:rolleyes: 54 sec´s.....course not with my M2 just cooled with CircleFlow(Water) max is 3600+......Prommy will PiFast in 4040:D , just have to w8 to get it back from Denmark
10-22-2003, 04:55 PM
Caprid

Quote:

Originally posted by LORD
I'm still holding the torch for Socket A. :D

And holding it quite high I see!!
Outstanding job, thats most impressive :toast:

Now that I have my board and CPU both running at the same time:rolleyes: I should have a socket 940 score soon....just need to shave of a few more 1/100ths.
10-22-2003, 07:06 PM
Caprid

Not quite there yet...but getting closer :D

http://caprid.homestead.com/files/pi42.36.jpg

FX-51
13X226
2947Mhz
10-22-2003, 07:44 PM
LORD

1 Attachment(s)

Quote:

Not quite there yet...but getting closer :D

Same here....:D

Nicely done btw :toast:
10-23-2003, 01:36 AM
LORD

Quote:

Originally posted by MickeyMouse
still my 2590mhz A64 is more impressive that that guys ;)

nice CAP no wait outstanding and LORD well you know your the sh*t I dont have to rub your head every time you bench at 3040mhz do I? hehe :)

Yep those new Athlons sure work fast. After having a look I saw that your results were pretty impressive Mickey M. So I'll give you a nice rub on your head as well....;) :D

When 939 pin finally gets released it should make for very interesting times. :p:
10-23-2003, 04:42 AM
JCviggen

i doubt we're going to see 260 DC... its like with the NF2 boards you know...how many did you see bench at 260 ??
I think we can be lucky to bench DC 240-245...but that should be fast enough at 2-5-2-2 ! You've seen my 3D scores at 225 DC but timings were 2-6-3-2, if you can run RAS to CAS at 2 thats going to fly especially at another 20 MHz extra... 200 FPS lobby high anyone??
10-23-2003, 06:57 AM
faruquehabib

wow, those scores are super old school!!!
10-23-2003, 09:04 AM
LORD

Quote:

Originally posted by MickeyMouse
LORD I just noticed you ahve always been following me ;) hehe J/K thought this was funny as its so old :)
BTW Im qwerty57 ;)
[img]<SNIP>[/img]

What, you were Querty57!? No you couldn't be....... LOL J/K Jason. Actually, I knew you were. I remember about the time you changed your nic. :D

The screenie though, it's from another era as far as hardware goes. That 15.3K score was done on an 8K3A+v1.2 at a 220 fsb with Win XP and all the bloat services running. I remember because a format had been done and I just tested it out. I don't think I saved any of those old ones but I'll have a look. Because a short while later a score of 16947 had been done. ;)

BTW finally got the 3Dmark publishing probs solved with the Barton 3Ghz system.

Paul :D
10-23-2003, 12:41 PM
zakelwe

There is a AMD64 entry at position 15 at 2Ghz and 200FSB doing a 49.22 !

Jason, can you pifast at default 2Ghz and see what you get ???

This seems too high.

Regards

Andy
10-23-2003, 01:53 PM
PMM

Ok folks

Currently in middle of an update...

But Just to mention the next update will not be until Tueday
next week.

**Fugger can you please post a screenshot m8y :)

thx
PMM
10-23-2003, 02:00 PM
Fewture

Improved my score:

http://www.fewture.cistron.nl/nf7-s2/untitled.JPG

Barton 2500+ 0324 TPLV "9"
Plain watercooling
KHX3500 CH-5 @ 3.18V @ 11-2-2-2
Vdd @ 1.85
3.3V @ 3.40V
Vcore @ 2.2V
10-23-2003, 02:10 PM
Caprid

Quote:

Originally posted by zakelwe
There is a AMD64 entry at position 15 at 2Ghz and 200FSB doing a 49.22 !

That's way out of line :confused: It should be around 54.00-56.00. My FX-51 on air running @2450 - 223X11 goes about 49.50

What's up with that PMM???

Nice clock Fewture :cool:
10-23-2003, 02:20 PM
PMM

Think that was one of the earlier results rec!!!
I'll strip it and look through my Email for the Database
submission.

Prob is lads at this early stage until I get lots of results from
the trusted ones I do not have a clear STD to compare against.

However if you trusted chaps could do some comparisons at
different clock speeds it would be a big help for validating
future A64 results :)

esp those below yourselves ;)
10-23-2003, 02:51 PM
PMM

Updated :)
10-23-2003, 03:42 PM
zakelwe

Quote:

Originally posted by PMM
Think that was one of the earlier results rec!!!
I'll strip it and look through my Email for the Database
submission.

Prob is lads at this early stage until I get lots of results from
the trusted ones I do not have a clear STD to compare against.

However if you trusted chaps could do some comparisons at
different clock speeds it would be a big help for validating
future A64 results :)

esp those below yourselves ;)

Yeah, the bogus ones will get weaseled out as we are too competitive to let dodgy ones not be questioned :)

This is me at the moment at 2300Mhz with an AMD64 3200

http://www.aocb77.dsl.pipex.com/screen.jpg

I'll put the details on hexus for you to fill in the details.

Regards

Andy

PS How is Bowman doing with youe AMD Jason ?
10-23-2003, 11:35 PM
LORD

1 Attachment(s)

Quote:

Originally posted by MickeyMouse
yum lets see 3040mhz 2k1 action :)

Sort of off topic but this one was done the other day.. Once going higher the Car bug seemed to rear it's ugly head.. Then to make up for it we'd have to find out how to do the nature 200fps bug..;)
10-24-2003, 07:37 AM
LORD

1 Attachment(s)

Quote:

Originally posted by MickeyMouse
you know BOWMAN he got the stuff wend mornig but he's a busy man and has to adapt a evap mont for the mobo so he said by the weekend sat/sun... I might also send a VIA K8V his way if the chaintech is too much mobo for him, hehe.. J/K benches soon IM sure.

He should do really well. If only there was a way to unlock the higher multi's on these A64's. I would have already had one. :)

Seeing as you found some old stuff from MO here's one for you. Does it jog the memory....
10-24-2003, 01:07 PM
zakelwe

Quote:

Originally posted by MickeyMouse
you know BOWMAN he got the stuff wend mornig but he's a busy man and has to adapt a evap mont for the mobo so he said by the weekend sat/sun... I might also send a VIA K8V his way if the chaintech is too much mobo for him, hehe.. J/K benches soon IM sure.

LOL :) I'm sure he'll manage. Just blown the gentlemans class GF4 4400 score apart with this AMD. You know it's too easy when instead of sweating over watching it thjrough the tests you are in the kitchen doing the washing up ;)

It's not even that cold in England at present for us air cooled boys.

How did I doubt yours and quads words in the AMD64 Jason ? :)

Regards

Andy
10-25-2003, 01:12 PM
Dagalidis

1 Attachment(s)

Ok here is my updated Scores with AMD STOCK COOLING YET.....

FAST PI at 2410 MHZ
10-25-2003, 01:14 PM
Dagalidis

1 Attachment(s)

Also here is my new Super PI.......

I Cant wait to Watercool this baby with MY EXOS......
Still waiting the new Waterblock clip for A64 Socket.....
10-26-2003, 03:17 AM
NoStra

Here a pifast bench of my Duron1400 (l2 modded)

http://129.125.103.64/pifastduron.jpg
10-26-2003, 09:53 AM
IamAnoobieCheez

Quote:

Originally posted by JCviggen
i doubt we're going to see 260 DC... its like with the NF2 boards you know...how many did you see bench at 260 ??
I think we can be lucky to bench DC 240-245...but that should be fast enough at 2-5-2-2 ! You've seen my 3D scores at 225 DC but timings were 2-6-3-2, if you can run RAS to CAS at 2 thats going to fly especially at another 20 MHz extra... 200 FPS lobby high anyone??

yep.. that's what I love.. tight timings at high FSBs. I used to do 230mhzFSB DC FastCPU decode, Ram timing at 5-2-2-2.0 for 3dmark and gaming. CorsairXMS3500, good sticks..
10-26-2003, 01:30 PM
zakelwe

Quote:

Originally posted by MickeyMouse
the same way i million others did, lol.. I know I sold some serious A64 setups with the bragging I did over the many 100 forums on the net, lmao :)

:)

Just did a 51.42s pifast at 240x10 1:1 2-6-3-3 on air .. not bad at all, still some to go, just found out how to get past this 232Mhz Abit limit.

Regards

Andy

Show 100 post(s) from this thread on one page

All times are GMT -8. The time now is 12:44 PM.

XtremeSystems