*HOT* | Corsair DOMINATOR GT | 6GB (3x2GB) | DDR3-2000 7-8-7-20 @ 1.65V | *HOT*

Quote:

---

Originally Posted by websmile

Definitely Elpida, but no Hyper- could be BBSE, maybe something else- testing on high frequencies may require to raise TRCD(second clock value) one or two numbers above TCL- for example 7-9-7 or 9-10/11-9, good luck and much fun at testing:)

---

Okay thanks

Quote:

---

Originally Posted by Zeus

Sorry man. :(

The sticks will do nice frequencies but at rather lousy timings.

If you want tight timings get the Dominator GT 2000C8 or the 1600C6 kits, these contain Hyper chips.

You'll need to hurry though, Elpida Hyper chips are EOL. :(

---

I assume that CMG6GX3M3A2000C8 (ver 2.1) are Hypers, right?
How far could they go at 6-6-6-20(18)? I stopped at 800 (1.65v) Any suggestions about RTL at speed? Thanks. :)

Is there a way how to tell whether the memory or the IMC is the culprit when prime crashes?
I can't seem to hit 2000 7-8-7. Setting CR to 2T helps with stability, but not completely.

It's an i5, guess it might be weak IMC :(

Quote:

---

Originally Posted by Gorki

I assume that CMG6GX3M3A2000C8 (ver 2.1) are Hypers, right?
How far could they go at 6-6-6-20(18)? I stopped at 800 (1.65v) Any suggestions about RTL at speed? Thanks. :)

---

It depends how the chips behave, you have the following types according to eva:

• some are high 8-8-8-x not so good for cas7

• some are low vdimm (1.5-1.6v) 7-7-6-x capable at DDR3-2000Mhz but don't scale with vdimm or looser timings past DDR3-2000/2050mhz

• some are needed no less than 1.65v for 7-8-7-x but don't handle 7-7-x-x timings well at DDR3-2000Mhz but scale at 7-8-7-x to well over DDR3-2100-2200. Not much different in max frequency for cas8

In my opinion you might be able to hit 1750-1800 with up to 1.7 vDimm. :yepp:

I have a set of 3x2 CMG6GX3M3A2000C7 for sale ... can i do a price check here ? nevermind i already did >_<

just bought these: TR3X6G2000C8GTf rev 2.1

will be showing results soon with MIVE...

anyone know if these are hypers mnh-e? mgh-e?

got some pics of it...
http://i53.tinypic.com/minhbr.jpg
http://i56.tinypic.com/1zed15c.jpg
http://i52.tinypic.com/2hs68mu.jpg
can't wait to try these babies out :)

Is this helpful?You just have to translate it to understand,but it is not necessarily you may see.

Greets Patrick
http://lab501.ro/memorii-stocare/cor...8-the-red-fury

But you have too look one Site 31,someone explained.......Saw it at first on the second look.


Ohh my English.:shrug:

This`re TR3X too and i couldn`t resist to set those voltages....and they`re still alive or got worse.But nevertheless be careful.

http://www.abload.de/img/1101btems.png

Quote:

---

Originally Posted by K.Machine

Is this helpful?You just have to translate it to understand,but it is not necessarily you may see.

Greets Patrick
http://lab501.ro/memorii-stocare/cor...8-the-red-fury

But you have too look one Site 31,someone explained.......Saw it at first on the second look.


Ohh my English.:shrug:

---

hahahaha.. i understood your English just fine :) and thanks for the link! :up:

Quote:

---

Originally Posted by badatgames18

just bought these: TR3X6G2000C8GTf rev 2.1

will be showing results soon with MIVE...

anyone know if these are hypers mnh-e? mgh-e?

---

Same ram here...Did 1070 7-8-7-24 1T on SB platform

Quote:

---

Originally Posted by Dumo

Same ram here...Did 1070 7-8-7-24 1T on SB platform

---

stock volts? what vdimm?

1.76 and kinda high VTT...UD7-B3 F5 bios

Yep TRX is MNH-E, CMG is MGH-E.

Quote:

---

Originally Posted by CryptiK

Yep TRX is MNH-E, CMG is MGH-E.

---

TRX is MGH-E
CMG is MNH-E

No...

CryptiK is right.

Quote:

---

Originally Posted by Don_Dan

No...

CryptiK is right.

---

Yap, i´m wrong.. sorry

Look at what i just bought for 34 dollars :D
http://i1099.photobucket.com/albums/...es18/asdfa.png

ver 2.1 is always hyper?

i wouldnt count on it :<.

not with those 1600 c8 sticks i think

i think those are Samsung ICs

aaw :(

darn it! (hopefully they're ok and i didn't waste 34 bucks)

well time to go hunting again :(

Quote:

---

Originally Posted by dinos22

i think those are Samsung ICs

---

but according to yellowbeard's version table.. samsung is 4.x and elpida is 2.x where 2.1 is usually hyper and 2.2 is bbse

http://forum.corsair.com/forums/showthread.php?t=68811

what do you guys think it is? i've tried before, but corsair hs are really hard to take off, and hard to put back on... pointers? should i have extra thermal pads lying around?

As far as I'm concerned, if a Corsair representative says ver. 2.1 is Hyper, then it is. I see no reason why there would be two different IC's used in "Ver. 2.1" If the IC is different, then they change the Ver. number.

yeah it might be hyper man, test it :D

but yeah read yellowbeards comments it might not be

Quote:

---

Originally Posted by dinos22

yeah it might be hyper man, test it :D

but yeah read yellowbeards comments it might not be

---

yea i guess... just actually read his comments

will test them and post pics. Can i reuse the thermal pads or will i need to buy new ones when i take of the hs?

EDIT: just tried taking off some hs from dominator gts lying around... it's superglued or soldered on :( hair drying work?

Its a bad idea, some peeps ripped dominator GT ics when trying to open it up

do not take it off, you will :banana::banana::banana::banana: up the sticks for sure man

i remember josh collins had that same kit 2.1 and it was samsungs..

easy way 7-7-7 1000 does it boot? if it does, hypers more than likely or perhaps very good bbse..