XS HWBot Team

Printable View

Show 100 post(s) from this thread on one page

03-14-2011, 01:21 PM
Don_Dan

http://img190.imageshack.us/img190/3...ch14th2011.jpg

Nice runs zeneffect and chew*! :up:
NameGT, what's up with all those runs at default speed? :p:
03-14-2011, 02:10 PM
SteveRo

Yes, Gentlemen, job well done! :clap::clap:
03-14-2011, 02:30 PM
chew*

My scores suck, more or less just feeling one of the ref cards out while I had the chance. CB was about -135's without pll , test pll next and maybe ram if my choke mod works then move on to next card.
03-14-2011, 02:37 PM
Don_Dan

Bad scores are better than no scores! :p:

You're also the first person to contribute 2000 points to the team, that's a great achievement in my opinion. :)
03-14-2011, 04:15 PM
chew*

I stand corrected, make that 3 more cards to test before I get to the direct CU II.

After 2 hours under the knife tonight the card that fed ex owned on it's trip back from CES is alive again.
03-14-2011, 06:32 PM
Linuxfan

Quote:

Originally Posted by chew*

My scores suck, more or less just feeling one of the ref cards out while I had the chance. CB was about -135's without pll , test pll next and maybe ram if my choke mod works then move on to next card.

Word. Can't wait for real scores... those runs are nice though for now! :)

Quote:

Originally Posted by Don_Dan

You're also the first person to contribute 2000 points to the team, that's a great achievement in my opinion. :)

+1 to that! :up:
Sorry I'm not up there with ya yet! :D
03-15-2011, 06:32 AM
Aerou

Quote:

Originally Posted by chew*

After 2 hours under the knife tonight the card that fed ex owned on it's trip back from CES is alive again.

Please, explain more!
03-15-2011, 09:17 AM
chew*

Quote:

Originally Posted by Aerou

Please, explain more!

Some resistors caps got crushed in shipping.
03-15-2011, 09:36 AM
l0ud_sil3nc3

anybody got an optimized copy of XP for superpi they wanna share?
03-15-2011, 10:34 AM
chew*

Quote:

Originally Posted by l0ud_sil3nc3

anybody got an optimized copy of XP for superpi they wanna share?

I'm just using full install SP3 atm. To be honest OS is worth the least for pi.........
03-15-2011, 11:11 AM
l0ud_sil3nc3

Quote:

Originally Posted by chew*

I'm just using full install SP3 atm. To be honest OS is worth the least for pi.........

32 bit I assume?

so if the os is worth the least for pi, then what would you consider the most important? proper tweaks i.e setting afinitty, lsc, themes, wazaa. . .
03-15-2011, 11:25 AM
chew*

Quote:

Originally Posted by l0ud_sil3nc3

32 bit I assume?

so if the os is worth the least for pi, then what would you consider the most important? proper tweaks i.e setting afinitty, lsc, themes, wazaa. . .

Timings. hardware tuning > software
03-15-2011, 11:28 AM
Linuxfan

Quote:

Originally Posted by chew*

Timings. hardware tuning > software

:up:
Running 32M as we speak... seems like this G.Skill 2200C7 kit doesn't go very far as far as timings go unfortunately... :(
03-15-2011, 11:44 AM
l0ud_sil3nc3

Quote:

Originally Posted by chew*

Timings. hardware tuning > software

well that's what I wanted to hear:up:

I have a M4E coming at the end of this week so hopefully it plays well with my hypers
03-15-2011, 11:47 AM
Linuxfan

Quote:

Originally Posted by l0ud_sil3nc3

well that's what I wanted to hear:up:

I have a M4E coming at the end of this week so hopefully it plays well with my hypers

Going to try hypers here in a minute on my M4E... Might be able to get a better 32M with my hypers if they'll run on the 2133 divider. :up:
You'll like the board. I've been enjoying it.
03-15-2011, 11:54 AM
l0ud_sil3nc3

Quote:

Originally Posted by Linuxfan

:up:
Running 32M as we speak... seems like this G.Skill 2200C7 kit doesn't go very far as far as timings go unfortunately... :(

what timings are you currently running?

my 2133 8-9-8 kit can run 2133 7-9-7 at less than stock volts and up to 2300 8-9-8 at 1.67

hoping I can use my hypers when the new board gets here
03-15-2011, 11:59 AM
Linuxfan

Quote:

Originally Posted by l0ud_sil3nc3

what timings are you currently running?

my 2133 8-9-8 kit can run 2133 7-9-7 at less than stock volts and up to 2300 8-9-8 at 1.67

hoping I can use my hypers when the new board gets here

I'm at 2250 7-10-7 25
Might try 8-9-8 :shrug:
03-15-2011, 01:28 PM
l0ud_sil3nc3

Quote:

Originally Posted by Linuxfan

Going to try hypers here in a minute on my M4E... Might be able to get a better 32M with my hypers if they'll run on the 2133 divider. :up:
You'll like the board. I've been enjoying it.

good that's what I like to hear, I just glad I found one in stock

http://www.chiefvalue.com/Product-_-...00160060010060
03-15-2011, 01:42 PM
Linuxfan

Quote:

Originally Posted by l0ud_sil3nc3

good that's what I like to hear, I just glad I found one in stock

http://www.chiefvalue.com/Product-_-...00160060010060

Couldn't get my Mushkin 2000C8 hypers to run with this board...
Oh well back to tweaking my PSC... :D
03-15-2011, 01:54 PM
l0ud_sil3nc3

Quote:

Originally Posted by Linuxfan

Couldn't get my Mushkin 2000C8 hypers to run with this board...
Oh well back to tweaking my PSC... :D

will they run at least 1600 c6?
03-15-2011, 02:09 PM
Linuxfan

Quote:

Originally Posted by l0ud_sil3nc3

will they run at least 1600 c6?

Yeah man, 6-5-5-15 with subs tweaked to the max here is my best run with 1600 divider: http://hwbot.org/community/submissio...min_23sec_78ms
Just doesn't compare to this kit even with not great latencies. :)
03-15-2011, 02:44 PM
Don_Dan

http://img340.imageshack.us/img340/1...ch15th2011.jpg

NAMEGT has finally posted some results at higher than default clocks! :D :up:
Also it's great to see that Aerou is posting a result of his new SB rig! :up:
And of course Linuxfan who has flooded the bot with many nice submissions today! :up:
03-15-2011, 02:59 PM
Linuxfan

Quote:

Originally Posted by Don_Dan

http://img340.imageshack.us/img340/1...ch15th2011.jpg

NAMEGT has finally posted some results at higher than default clocks! :D :up:
Also it's great to see that Aerou is posting a result of his new SB rig! :up:
And of course Linuxfan who has flooded the bot with many nice submissions today! :up:

:up:
Much more to come I hope! Ran out of time yesterday or would have had more runs up! :)
Thanks to Splave for selling me the nice 5.6g chip!
03-15-2011, 09:37 PM
namegt

3DMARK a little clumsy, I need to practice. hahaha ;)
and must study more. Somebody help me.
03-16-2011, 02:46 PM
Don_Dan

Quote:

Originally Posted by namegt

3DMARK a little clumsy, I need to practice. hahaha ;)
and must study more. Somebody help me.

Seems fine to me now! :D

http://img843.imageshack.us/img843/1...ch16th2011.jpg

Great work Linuxfan and NAMEGT, again a ton of results! :up:
Aerou, push your memory and watch that 32M fly, seems like you found a good CPU that will give you many more nice scores. :yepp:
Last but not least, slaveondope who is doing his first DICE session! Show some more scores please! :up:
03-16-2011, 03:13 PM
SteveRo

Wow great work guys, keep it up! :clap::clap:

Mr. Chew much congrats on breaking 2k and taking over the #1 spot in the team rankings - where you should be. :yepp:

I suspect Mr. Linuxfan will also overtake me very soon now that he finally has a good SB :up:
03-16-2011, 04:17 PM
Linuxfan

Quote:

Originally Posted by SteveRo

Wow great work guys, keep it up! :clap::clap:

Mr. Chew much congrats on breaking 2k and taking over the #1 spot in the team rankings - where you should be. :yepp:

I suspect Mr. Linuxfan will also overtake me very soon now that he finally has a good SB :up:

You know it man!
COMIN' THROUGH! :rofl:
03-16-2011, 09:07 PM
namegt

SteveRo / Linuxfan
SB are expected great records. :)
03-16-2011, 09:08 PM
Linuxfan

Quote:

Originally Posted by namegt

SB are expected great records. :)

If you find a good one that is. :D
03-16-2011, 09:22 PM
namegt

Quote:

Originally Posted by Linuxfan

If you find a good one that is. :D

Thanks: D
XS team members to join the top line ...:rofl:

http://cfile23.uf.tistory.com/image/...4D8199340F0CAE
03-16-2011, 09:41 PM
Linuxfan

Quote:

Originally Posted by namegt

Thanks: D
XS team members to join the top line ...:rofl:

http://cfile23.uf.tistory.com/image/...4D8199340F0CAE

Nice work man! Top5 team contributor in total points!
03-17-2011, 02:32 AM
SteveRo

Yes, NameGT - congrats and job wel done!
03-17-2011, 06:27 PM
MTP04

Lots of good scores from a lot of different people lately, congrats to everyone involved.:clap::up:
03-17-2011, 06:58 PM
Linuxfan

Quote:

Originally Posted by MTP04

Lots of good scores from a lot of different people lately, congrats to everyone involved.:clap::up:

ARRRGH still got a lot to do too! Just starting to pull out some GPUs here. :D
2K points total here I come! :up:
Hopefully I can beat Brian so bad in total and global points that he get back to benching soon... :rofl:
:up:
03-18-2011, 09:15 AM
Don_Dan

Quote:

Originally Posted by Linuxfan

ARRRGH still got a lot to do too! Just starting to pull out some GPUs here. :D
2K points total here I come! :up:
Hopefully I can beat Brian so bad in total and global points that he get back to benching soon... :rofl:
:up:

Nice job, you're already at 1800 points and currently #1 in the global team ranking with a 1 point lead. :up:
03-18-2011, 09:30 AM
Linuxfan

Quote:

Originally Posted by Don_Dan

Nice job, you're already at 1800 points and currently #1 in the global team ranking with a 1 point lead. :up:

1 point... :ROTF:
Thanks man. :)
03-18-2011, 10:11 AM
chew*

Quote:

Originally Posted by Linuxfan

1 point... :ROTF:
Thanks man. :)

I guess I will have to change that today, according to tracking a worthy phase change arrives today.
03-18-2011, 10:20 AM
Linuxfan

Quote:

Originally Posted by chew*

I guess I will have to change that today, according to tracking a worthy phase change arrives today.

Looking forward to it! :up:
Love my SS I know you will too. :D
03-18-2011, 10:27 AM
chew*

Quote:

Originally Posted by Linuxfan

Looking forward to it! :up:
Love my SS I know you will too. :D

Heh I only need to run one bench, just need to decide which to run :D
03-18-2011, 10:31 AM
Linuxfan

Quote:

Originally Posted by chew*

Heh I only need to run one bench, just need to decide which to run :D

Aww I don't go down that easy :hehe:
I hope :p:

LETS SEE 700 GLOBAL POINTS BRIAN :cheer:
03-18-2011, 01:08 PM
l0ud_sil3nc3

now this is what I am talking about, nothing like a friendly inner team competition to keep everyone motivated:toast:

I need to find a decent 2600k, I have been through 6pcs and they all sucked hard (5300 ish), oh well just have to keep playing the lotto.
03-18-2011, 01:35 PM
Linuxfan

Quote:

Originally Posted by l0ud_sil3nc3

now this is what I am talking about, nothing like a friendly inner team competition to keep everyone motivated:toast:

I need to find a decent 2600k, I have been through 6pcs and they all sucked hard (5300 ish), oh well just have to keep playing the lotto.

I have 3 54x 2600Ks here... you need a 55x+ though. ;)
03-18-2011, 03:01 PM
chew*

Special thanks to RunMc.

I can finally do pretesting/debugging etc etc without rubberbanding a mach1 to a motherboard.......not to mention actually pull sub 0C and not positive C temps..........

http://members.cox.net/wmdieselmc26/...t/eric%201.jpg
03-18-2011, 03:22 PM
Linuxfan

Quote:

Originally Posted by chew*

Special thanks to RunMc.

I can finally do pretesting/debugging etc etc without rubberbanding a mach1 to a motherboard.......not to mention actually pull sub 0C and not positive C temps..........

http://members.cox.net/wmdieselmc26/...t/eric%201.jpg

Looks great! :)
03-18-2011, 08:24 PM
chuchnit

I love my SS Ron built me. Nice grab chew*
03-18-2011, 11:45 PM
SteveRo

Looks very nice Mr Chew!
03-19-2011, 01:04 AM
l0ud_sil3nc3

Quote:

Originally Posted by Linuxfan

I have 3 54x 2600Ks here... you need a 55x+ though. ;)

I just grabbed two more of them today one from microcenter and one from fry's hopefully they are not poo poo:D
03-20-2011, 09:49 AM
chew*

Quote:

Originally Posted by Linuxfan

Aww I don't go down that easy :hehe:
I hope :p:

LETS SEE 700 GLOBAL POINTS BRIAN :cheer:

I could have taken the easy way and benched wprime, or 01, or single card vantage for globals. Instead I took hardway and 10 WR points :D

Course ron's single stage made it easy to dial rig in before hitting it with ln2.
03-20-2011, 09:56 AM
Linuxfan

Quote:

Originally Posted by chew*

I could have taken the easy way and benched wprime, or 01, or single card vantage for globals. Instead I took hardway and 10 WR points :D

Course ron's single stage made it easy to dial rig in before hitting it with ln2.

Nice run there... lol
You're only at 620 man... time to hit that Wprime and '01 as well as single GPU vantage...
Like I said lets see 700 global! 620 isn't enough :D
03-22-2011, 11:39 AM
Don_Dan

Good stuff guys! :up:

http://img34.imageshack.us/img34/430...ch22nd2011.jpg
03-22-2011, 11:57 AM
Linuxfan

Quote:

Originally Posted by Don_Dan

Good stuff guys! :up:

http://img34.imageshack.us/img34/430...ch22nd2011.jpg

Mr. NameGT, you need to work on some 3D efficiency there then you can really knock out some nice scores. :up:
YGPM :)
03-22-2011, 06:37 PM
chew*

Quote:

Originally Posted by Linuxfan

Mr. NameGT, you need to work on some 3D efficiency there then you can really knock out some nice scores. :up:
YGPM :)

He's on ATI, the "tweaks" your referring to won't help much ;)
03-22-2011, 07:04 PM
Linuxfan

Quote:

Originally Posted by chew*

He's on ATI, the "tweaks" your referring to won't help much ;)

Wait, I"m talking about the GTX 580 :ROTF:
Anyway its cool. :up:
03-22-2011, 07:06 PM
namegt

I'm not yet familiar with 3D benchmark.
Need more practice. :)
3DMARK01SE a good score on the gigabyte board ...? Right?
03-22-2011, 07:10 PM
Linuxfan

Quote:

Originally Posted by namegt

I'm not yet familiar with 3D benchmark.
Need more practice. :)
3DMARK01SE a good score on the gigabyte board ...? Right?

Yeah its easy to score high on the Giga P67s... still '01 needs a lot of tweaking or you get a bad score regardless.

See, I tried on an Asus board with a 570 and got 117.5K http://hwbot.org/community/submissio...0_117593_marks
Gigabyte board almost same settings 119.3K http://hwbot.org/community/submissio...0_119305_marks
You should be 125K+ at your clocks with a gigabyte board and properly tuned and over 120k with Asus. ;)
03-22-2011, 07:16 PM
namegt

Quote:

Originally Posted by Linuxfan

Yeah its easy to score high on the Giga P67s... still '01 needs a lot of tweaking or you get a bad score regardless.

See, I tried on an Asus board with a 570 and got 117.5K http://hwbot.org/community/submissio...0_117593_marks
Gigabyte board almost same settings 119.3K http://hwbot.org/community/submissio...0_119305_marks
You should be 125K+ at your clocks with a gigabyte board and properly tuned and over 120k with Asus. ;)

Wow thanks
Thanks a lot for help. :up:
03-22-2011, 07:25 PM
Linuxfan

Quote:

Originally Posted by namegt

Wow thanks
Thanks a lot for help. :up:

Your team is here to empower you to get great efficiency to complement benches on your nice hardware. :D
03-23-2011, 07:57 AM
Linuxfan

Steve,
Grab a UD7 at Newegg while they last! :up:
03-24-2011, 10:03 AM
Don_Dan

Good luck to Team PCLab.pl for tomorrow's national qualifications event for MOA 2011! :up:
03-24-2011, 03:12 PM
SteveRo

Quote:

Originally Posted by Linuxfan

Steve,
Grab a UD7 at Newegg while they last! :up:

I have a ud4 :D for now, waiting to see if my local MC gets some UD7s in. :)
03-25-2011, 01:23 PM
Don_Dan

Quote:

Originally Posted by xoqolatl/G.Foyle

We managed to beat ryba and Borko and will be representing Poland in Istanbul. See you there guys :)

Very well done, and congratulations! :up:
03-25-2011, 02:04 PM
MTP04

Congrats G.Foyle! :clap:
03-26-2011, 04:49 AM
SteveRo

Mucho Congrats Mr. G.Foyle! :clap::clap::clap:
03-26-2011, 10:00 AM
G.Foyle

Thanks guys :up: last 30 minutes were hell on earth, we were almost sure we wouldn't make it with last score but fortunately it worked out :)
03-26-2011, 12:57 PM
Linuxfan

Quote:

Originally Posted by G.Foyle

Thanks guys :up: last 30 minutes were hell on earth, we were almost sure we wouldn't make it with last score but fortunately it worked out :)

Glad to hear it. Awesome! :up:
03-28-2011, 05:45 AM
Don_Dan

Quote:

Originally Posted by G.Foyle

Thanks guys :up: last 30 minutes were hell on earth, we were almost sure we wouldn't make it with last score but fortunately it worked out :)

Yah, I'm still surprised you n00bs won... :rofl: ;)
The next goal is to beat Massman in Istanbul! :D

Please check out some photos from MOA 2011 Poland that Team PCLab has posted on their site! :up:

http://img535.imageshack.us/img535/5...ch28th2011.jpg

Nice going team, a special congrats to NAMEGT for reaching 1100 points! :up:

Congrats to SteveRo for breaking the PCMark 05 4core WR a few days ago! :yepp:
03-28-2011, 07:07 PM
namegt

"Linuxfan" Thank you.:)

And XS team :up:
03-28-2011, 09:29 PM
G.Foyle

Quote:

Originally Posted by Don_Dan

Congrats to SteveRo for breaking the PCMark 05 4core WR a few days ago! :yepp:

Yeah, great job Steve, that's the spirit! But I expect even more since you said there's still tweaking headroom :)
03-29-2011, 02:47 PM
slaveondope

Just wanted to thank Linxfan, NameGT, DonDan, and anyone else I forgot who has given me encouragement to keep pushing further.
920 and 1090t are next on the pot :D
03-29-2011, 02:52 PM
Linuxfan

Quote:

Originally Posted by slaveondope

Just wanted to thank Linxfan, NameGT, DonDan, and anyone else I forgot who has given me encouragement to keep pushing further.
920 and 1090t are next on the pot :D

Yeah man keep pushing you're doing great! :up:
03-30-2011, 09:22 AM
Don_Dan

Quote:

Originally Posted by slaveondope

Just wanted to thank Linxfan, NameGT, DonDan, and anyone else I forgot who has given me encouragement to keep pushing further.
920 and 1090t are next on the pot :D

You're welcome! :)

That's a nice new user title! :D
03-30-2011, 10:04 AM
chew*

Got my hands full with reviews for awhile so for now I slumber.
03-30-2011, 10:22 AM
Linuxfan

Quote:

Originally Posted by chew*

Got my hands full with reviews for awhile so for now I slumber.

While you work on reviews I'll knock out some team hardware point runs and get 2k total points :up:
03-31-2011, 01:58 AM
SteveRo

Quote:

Originally Posted by G.Foyle

Yeah, great job Steve, that's the spirit! But I expect even more since you said there's still tweaking headroom :)

Yes, I am not seeing the HDD scores that i should.
Both areca and onboard PCH scores should be higher.
I'm not to concerned about the PCH as i am not too far off where I should be - maybe 10% or so - but on the areca i think i have maybe 20% improvement that i need to find. i base this on info and scores posted by folks over on the storage forum.
03-31-2011, 11:43 AM
Tiltevros

1 Attachment(s)

steve :D

look here
http://3dmark.com/pcmv/431155

and here
03-31-2011, 10:34 PM
Linuxfan

1 Attachment(s)

Well didn't really pull out any big guns or do anything special today but tested an average clocking(or maybe even below average :eek)5850 with my buggy WS Revolution P67 board and passed 2k finally...
More to come of course not stopping here :D
04-01-2011, 01:13 AM
SteveRo

Mr. Linux - Much congrats on passing 2k - big achievement! :clap::clap::clap:

Question though - why are you showing in the forum as "Movieman" :shrug:
04-01-2011, 03:18 AM
Don_Dan

Congrats Daniel, well done! :up: :up: :up:
04-01-2011, 03:33 AM
G.Foyle

Movieman has assimilated all WCG crunchers... borging taken to next level :up:
04-01-2011, 03:43 AM
SteveRo

Quote:

Originally Posted by G.Foyle

Movieman has assimilated all WCG crunchers... borging taken to next level :up:

A Movieman Borg attack, runaway!, runaway! ...
04-01-2011, 05:33 AM
Tiltevros

steveR0 any luck with ur array? :/
04-01-2011, 08:10 AM
l0ud_sil3nc3

congrats Linuxfan
04-01-2011, 03:55 PM
SteveRo

Quote:

Originally Posted by Tiltevros

steveR0 any luck with ur array? :/

I have set it aside for the moment - currently working on the 580 with a better oc on the 2600k. :)
04-01-2011, 04:11 PM
Linuxfan

Quote:

Originally Posted by SteveRo

I have set it aside for the moment - currently working on the 580 with a better oc on the 2600k. :)

I hear ya! :up:
Would like to do a nice '03 with LN2 on a 580 but don't know if I will take the time... :(
04-01-2011, 07:22 PM
Linuxfan

Quote:

Originally Posted by Linuxfan

More to come of course not stopping here :D

Well guys changed my mind...
I'm going to quit benching now.

Its april fools.... :shakes:
:rofl:

Can't believe we didn't see any april fools WRs or anything today :hehe:
04-02-2011, 09:19 AM
Linuxfan

1 Attachment(s)

21k is done nice CPU you have there nameGT, looks like the best in our team by a few mhz. :D
04-04-2011, 03:39 AM
Don_Dan

We're at 21200 points already! :clap:

Crazy chip zeneffect! :up:
04-04-2011, 06:33 PM
chew*

3 Attachment(s)

Decided that I want to tackle vantage and see if I can't crack 40K, that means I need everything my chips got so I pretested it again today.....

Unfortunately the core is just sapped dry of mhz but I finally figured out my uncore.....

I tried a few ways but for running up clocks in GT's pic 2 is more realistic.

I just tried 5.9 gt's in last shot just to make sure everything would run through.
04-04-2011, 06:52 PM
Linuxfan

Nice Brian the CPU speed is looking pretty decent there :)
Brian and I are going to close in our your lead Steve... :D
LN2 580 planned tomorrow just some quickie stuff...
04-04-2011, 07:11 PM
chew*

Quote:

Originally Posted by Linuxfan

Nice Brian the CPU speed is looking pretty decent there :)
Brian and I are going to close in our your lead Steve... :D
LN2 580 planned tomorrow just some quickie stuff...

CPU speed is nothing new, the uncore is cranking though.

Sandy has little chance against gulfy tbh......only in 03 and 01.

I still have 2 more ref cards to test and some reviews before i get to play ;)
04-04-2011, 07:39 PM
Linuxfan

Quote:

Originally Posted by chew*

CPU speed is nothing new, the uncore is cranking though.

Sandy has little chance against gulfy tbh......only in 03 and 01.

I still have 2 more ref cards to test and some reviews before i get to play ;)

Sounds good.
5ghz uncore :shocked: :up:
04-04-2011, 11:39 PM
Leeghoofd

Quote:

Originally Posted by chew*

Sandy has little chance against gulfy tbh......only in 03 and 01.

If you have a crap GT like I do ( not even 6ghz 3D06 at 1.87Vcore ) dunno if a 5.7Ghz SB will get hammered that bad B... my CPU too is a bad raw MHz monster, uncore is near the 4.9-5ghz level though... bad investment...

It all depends on the available hardware...
04-05-2011, 12:01 AM
chew*

Quote:

Originally Posted by Leeghoofd

If you have a crap GT like I do ( not even 6ghz 3D06 at 1.87Vcore ) dunno if a 5.7Ghz SB will get hammered that bad B... my CPU too is a bad raw MHz monster, uncore is near the 4.9-5ghz level though... bad investment...

It all depends on the available hardware...

Guess it all depends on Game tests and what your sandy can do, mines only good for 5640 ish.

06 this is good for 6150 in game tests, 05 I was doing 52K with a card on air low uncore crappy settings , needed ln2 on card with my 5.6 sandy to catch it.

Preety sure that I need to use gulfy for a few benches, 01 and 03 I will use sandy.
04-05-2011, 01:16 AM
SteveRo

Looking good guys!
Mr Chew - I would of thought (depending on how strong the cpu) sandy was good for everything except 06 and vantage (6 cores needed)?
04-05-2011, 07:44 AM
=[PULSAR]=

Well I'm buying some hardware to mess around with should be able to get some decent points for the team with a 6600GT/128. Going to start off slow this time instead of going from water to trying to manage 4 pots :lol:
04-05-2011, 08:05 AM
Linuxfan

Quote:

Originally Posted by =[PULSAR]=

Well I'm buying some hardware to mess around with should be able to get some decent points for the team with a 6600GT/128. Going to start off slow this time instead of going from water to trying to manage 4 pots :lol:

Welcome back :)
Will be interesting... 6600GT you have already or are getting mods done?
04-05-2011, 09:37 AM
=[PULSAR]=

I saw it in the for sale section thought I would pick it up, mods probably won't happen right now. I'm so jammed with things like school right now, and this is my crossfit and olympic lifting competition season. Hopefully mid May when I have time I'll get back at it for the summer.
04-05-2011, 01:03 PM
chew*

Quote:

Originally Posted by SteveRo

Looking good guys!
Mr Chew - I would of thought (depending on how strong the cpu) sandy was good for everything except 06 and vantage (6 cores needed)?

You be the judge. that was hardly pushed or tuned, screwing off in a hotel room on older drivers....no tweaks, It's more dependant on what your hardware is capable of, my gulfy is capable of more in this case. With more uncore, higher ram and tweaks + card on ln2 score will improve considerably.

http://www.hwbot.org/community/submi...80_52063_marks
04-05-2011, 01:26 PM
=[PULSAR]=

This is more of a question for the team but I have a Asus Max 3 and a 655k, looking at the point breakdown on HWbot it looks pretty pointless for 2D benches. Is it worth keeping it out for 3D benching if I have a 980x on the way. If not its going in the HTPC.
04-05-2011, 01:27 PM
Linuxfan

Quote:

Originally Posted by =[PULSAR]=

This is more of a question for the team but I have a Asus Max 3 and a 655k, looking at the point breakdown on HWbot it looks pretty pointless for 2D benches. Is it worth keeping it out for 3D benching if I have a 980x on the way. If not its going in the HTPC.

Unless its a good chip and you can push it on LN2 like you said its not worth much in 2D. Its not worth anything in 3D either if you get a 980x or 2600K :)

Show 100 post(s) from this thread on one page

All times are GMT -8. The time now is 12:14 PM.

XtremeSystems