**Official ABIT IP-35 Pro Review/Overclock/Guide Thread**

New to this forum but found it while looking for bios information on my aging but still alive and trusty Abit IP35 Pro motherboard. I am trying to download the Bios compilation but I get this error "This account's public links are generating too much traffic and have been temporarily disabled!". Is it possible to get it from another source?

https://docs.google.com/file/d/0B5mp...it?usp=sharing

sorry to ask here, but, currently attempting to upgrade to 64-bit

in my sig is my memory. I only have 4GB, so obviously would like to max it with this board.
I see I have 2 sticks of CMX256A-3200LL XMS3200 256 MB 400MHZ 2356, AND 2 of XMS3202V1.1 024805 CMX256A-3200 C2

can I use any of these to max my board?
if not, please recommend place to buy memory besides eBay?

thanks

Those are all DDR1 sticks, they are physically incompatible. Craigslist might have some cheap memory.

UPDATE: Found some more.
I have a CM2X2048-6400C5DHX XMS2-6400 2048MB 800Mhz 5-5-5-18 1.80v ver4.1 08010010...these are silver with yellow and orange label,
http://i.imgur.com/kG6MaVl.jpg

unlike my CM2X2048-6400C5DHX 5-5-5-18 1.80V ver4.1 that are black http://i.imgur.com/NZW735L.jpg
will these work?

thanks for your assistance btw

Those will work fine.

Quote:

---

Originally Posted by Ligushka

Those will work fine.

---

thanks for the go signal.

inserted it in the open slots, prayed...re inserted the power cable to the PSU.
turned the PSU
POST= 01............:confused:

Heart racing....fumbled for Google answer...but, decided to take a chance...POWER ON....

IM WORKING!!!!

:clap::clap::clap:
thanks

Quote:

---

Originally Posted by Ligushka

https://docs.google.com/file/d/0B5mp...it?usp=sharing

---

Or anyone actually.

I'm a complete n00b when it comes to flashing, and I can't find my Floppy drive anyone, so I have to result with USB.

Can someone please set up a tutorial for a 6-y/o=me, on how to set up a USB flash drive for BIOS flashing.


I'm under the assumption that :
18/b18-1116.BIN
18/flash.bat
are the latest.

I didn't do any modding to the board besides Ace's fan mod.

I went back the default safe BIOS since I was getting into a lot of memory dump when loading/transferring a hundred pictures from camera to HD.

greatly appreciate it

http://www.sevenforums.com/tutorials...ve-create.html

Yes, those are the latest files.

Thank you

Quote:

---

Originally Posted by Ace-a-Rue

The Legacy lives on!:up:

---

Yes that was a fun board.
My old setup is stil running. Now its my 74 year old uncle s desktop. Water cooled and ssd powered :-)

Sent from my GT-I9100 using Tapatalk

Still going strong here with ~4.92 years of total PC uptime. Still in use daily at my girlfriend's house and at 100% CPU load generally with Folding@home. It could use an SSD, but still is otherwise quite usable and fast enough.

brothers need your advice

I want to make one final update to this board since I maxed my memory and switched to 64-bit.

what FINAL nVidia video card should I get so I can play max settings?



My upgrade list, the rest of parts from current specs will get recycled

ASUS GTX780-DC2OC-3GD5 GeForce GTX 780 3GB 384-bit GDDR5 PCI Express 3.0 HDCP Ready SLI Support Video Card $519.99
CORSAIR Dominator Platinum 16GB (2 x 8GB) 240-Pin DDR3 SDRAM DDR3 1866 Desktop Memory Model CMD16GX3M2A1866C9 $200.99
ASUS Sabertooth X79 LGA 2011 Intel X79 SATA 6Gb/s USB 3.0 ATX Intel Motherboard -$30.00 Instant $339.99 = $309.99
Intel Core i7-4930K Ivy Bridge-E 3.4GHz LGA 2011 130W Six-Core Desktop Processor BX80633i74930K $579.99
CORSAIR Hydro Series H100i -$15.00 Instant + $10.00 Mail-in Rebate Card $124.99 = $109.99
Corsair Neutron Series GTX CSSD-N240GBGTXB-BK 2.5" 240GB SATA III Internal Solid State Drive -$30.00 Instant $229.99 = $199.99
Subtotal: $1,920.94

YEP, wife's not going to like that

Quote:

---

Originally Posted by Ace-a-Rue

generally that is a memory problem...a couple of things you can try is to raise your Vdimm and/or loosen you memory timings.

if that does not work, also raise your vcore, ICHIO and MCH.

why don't you post your set voltages.

i do see that you have four sticks of memory...overclocking becomes more difficult in that configuration...generally the cure is to at least raise Vdimm, ICHIO and MCH....do it in small increments to see if that solves the problem.

i will be gone for a week so someone else can give you a helping hand to help you solve this little problem-O;)

---

Thread revival, I know, but I'm trying to get 4x4GB to work currently. Am running 2x2GB of the G.Skill F2-8000CL5D-4GBPQ. I've been short on memory so I ordered another pair. I can get a stable system with the old pair and the new pair separately but they aren't playing well together. BSOD in Windows, etc.

Otherwise, been running my E6850 @ 400x9 2x2GB 2.0v 4:5 5-5-3-15-55-2T since 2007 without a hiccup. MCH 1.29v, ICHIO 1.5v. GTLREF at 67/67.

Now with all 4 sticks, I get a couple of minutes of stability if I raise ICHIO to 1.6v but nothing beyond that helps. Raising MCH makes the system less table. Raising (and lowering) vdimm makes the system less stable. Raising DDR2 reference voltage (from 0) makes it less stable. I'm about to give up and just down-clock it a bit. Will report back if that does the trick.

Well keeping everything as-is:

400x9 1:1.25 (DDR2-1000)

DDR2 2.0v
MCH 1.29v
ICHIO 1.60v

I get 2-3 minutes of stability in OCCT Linpack. These settings were stable for the last 6 years with 2 sticks of RAM. 4 seems to be a bit more demanding. No other changes improved stability (as explained above).

Dropping the memory to 1:1.20 (DDR2-960) gets me 20 minutes, and the test simply errored without crashing the system. Progress!

Then upping the MCH to 1.37v has so far netted me 45 minutes. I think I'm going to call it good if it survives 1 hour of hell :up:

OCCT Linpack (90% memory setting) torture test errored after 1h 41m. I figure if it can survive that long at that level, it should handle my daily tasks of web browsing and photo editing :D

I guess going from 1000 to 960 is a rather small concession to make in the quest for 8GB.

I will say...at no other time have I seen my CPU hit 70c like I did during OCCT Linpack :eek:

I just found out that there is an easy mode

http://www.delidded.com/lga-771-to-7...n-instructions

where you can run Xeon cpu's (LG771) in LG775 motherboards...

has anyone tried an intel xeon cpu (E5450) with ip35pro ?

Quote:

---

Originally Posted by soulkeeper

I just found out that there is an easy mode

http://www.delidded.com/lga-771-to-7...n-instructions

where you can run Xeon cpu's (LG771) in LG775 motherboards...

has anyone tried an intel xeon cpu (E5450) with ip35pro ?

---

I have bad news, ip35-pro does not work nicely with 771 xeons. It will boot fine but whenever you change your overclock settings it will revert back to stock after double posting on reboot. Funny enough the ip35-e works without problems, except for the double post. So now I am rocking an E5440 on ip35-e while my ip35-pro is collecting dust. :(

http://i42.tinypic.com/2u4slm8.jpg

Amazing to see the IP35 still being supported here, with that in mind could I ask for some help.

I have kept updating my HTPC which is an IP35 motherboard, and now it has Windows 8.1 loaded I've come across the first real issue.

Windows 8.1 changes the way the system wakes from sleep (or hibernation), and now requires HPET, or High Precision Event Timer to be present as a system device. The only BIOS which supports this is the beta 12 BIOS, which is good, but also lacks the updates later versions have.

It would be a great benefit to current IP35 users wanting to use Windows 8.1 if someone could modify a later BIOS and add HPET support, or look into which module HPET is on and try to merge the code for it. Without HPET enabled in the BIOS our beloved IP35 will not wake with a scheduled task.

I can supply the only BIOS which does work with HPET, can anyone update a later BIOS with the relevant code?

I have no idea how to go about adding HPET. It's odd that only that specific version has HPET support, maybe that was one of the "beta" features they tried to add. Sorry, the only extent of BIOS modding I know is OROM replacement. If you can get by with using beta 12 and don't absolutely require the additional features/fixes of newer BIOS versions, I would be glad to update its option ROMs for you.

As you say it is odd, only beta12_01 has fully available HPET options. It works OK, the high precision timer is fully functional in this one BIOS.

BIOS versions M629B12b02 and M629B_12.BIN have the code present in the actual BIOS but the HPET menus are disabled the setup page. So the most up to date BIOS it could be enabled in is M629B_12.BIN

Your offer to update the Option ROMs is great thank you, so yes please that would great. So just for clarity the one we are talking about is M629B12b01

Thanks again, your help is appreciated.

It may be possible to edit the menu to be visible in the "stable" 12 BIOS release but last time I tried to edit menus I bricked my board, so I don't want to risk it. I will just update the option ROMs of the 12 beta 1 BIOS then, I should have it done within a few days.

Thanks, that great. Agreed no need to takes risks the early beta seems OK for me.

Updated the front page again with Ligushka's last update.

Quote:

---

Originally Posted by Ace-a-Rue

Amazing that this thread is still alive and viable. My board is now in the Philippines being shared by an extended family member.

---

Yes I agree, long time no see. :)

I miss the motherboards and the Abit forums, absolute great bunch of people on there, best forums I have ever used since using the Internet since 1994, total shame the forums were closed down.

Would of been great to have moved it onto another website and kept the community it had.

Quote:

---

Originally Posted by Nelly

Updated the front page again with Ligushka's last update.

---

It's been a blast - here's to you two and Ace-a-Rue :clap: