Dark side for ever Dag............. :D
Printable View
Dark side for ever Dag............. :D
Thanks M8...........I think that with the FX51 and a modded Prommie you can do it.......... ;)
Here's the number one spot for a phase changed AMD :D
http://users.pandora.be/JCviggen/pifast227.JPG
I also made a 41.6 but error in computation there...
super pi goes in 29 secs
http://users.pandora.be/JCviggen/superpi29.JPG
speed is a bit lower, it was 29s at higher speed as well.
Corsair 3200 reg at 228 2-6-3-2 dual channel on an SK8N, nVENTIV Mach II cooling of course
:)
:slobber:
"JC, look behind you!"
*yoinks*
Bet I'd run fast with that rig on my back :D
That's some very nice speed with that FX setup. JC. :toast:
Now I'm definitrely lookin forward to the 939 pin variety.
well cant afford A64 right now, so I guess 244 2-2-2-11 with Interface on is the next best thing
http://members.iinet.net.au/~zzhang/5043.jpg
this pifast is some addictive §§§§
update:
http://members.iinet.net.au/~zzhang/4999.jpg
talk about system speed :eek: http://service.futuremark.com/compare?2k1=7117467
142.5 FPS car hi, 171.6 lobby hi.... and still wayyy limited by gfx card.... 480/380 clocks... this rig would pull 28K with one of the big 3D guys cards.
yeah you know my lobby high went from 168 to 172 just by going from 440/360 to 480/380 ... I reckon it will be 175+ qt those speeds... 440/360 gave me 24K exactly, 480/380 gives me 25.5K already...thats 1500 pts for a small increase in card
heh ya know to get to 480 - with huge artifacts - I am already using 1,90 Vgpu and an MCW50-T 80W pelt, this card sucks
JC, where are you atm? PM meh :) I'd send you my card if I can use the POS until mine gets back :)
I wonder if A64 single channel at 2.9GHz could beat that :D
I've ran my mobo up to 300FSB now SuperPi stable.. so 290x10 with RAM at 241 would be more than possible if the CPU just could do it ;)
and JC do the Vmem mod there FFS (use micro grabbers.. no one will ever know you did it..)!! :D
Denmark, and although the idea of a good radeon is appealing, maybe better not ;)
:banana:
Anyway results up :)
Yes, you already FUBAR'ed one of my cards :D
I don't forget ;)
Anyway, nice score mate :)
Quote:
Originally posted by macci
and JC do the Vmem mod there FFS (use micro grabbers.. no one will ever know you did it..)!! :D
Well i have some more mem volts now but the board doesnt really want to go any higher... well at 228 its the CPU that is on its end... the mem could go a tad higher still. But i guess if i could run multi 12 at this speed it could go sub 40 secs in this bench...but you cant have it all.... its already screemingly fast at 225 1:1 DC ,,, sandra gives me 6,8 GB/s buffered, and the lobby scores speak for themselves. 240-250 1:1 oh man,,,
I dont know if the 3200 A64 has the bandwidth needed to go fast in pifast... and the 5:4 divider isnt exactly as fast as the one on the Canterwood :(
well your lobby hi is with huge card clocks... and from what ive seen lobby high even goes up quite a lot with increasing card clocks,
i think we might be getting a tad OT here though ;)
Nice score on the pifast JC. :thumbsup:
Nice that you are now talking about the 40 second barrier. I am hoping to go under the 50 second barrier soon on aircooled, but we will see.
How things progress.
Nice game scores for car and lobby as well.
Regards
Andy
40 second barrier yea, but for me it's still the 50 second one I'm trying to reach :)
Scaved another tenth of my time.
A 52.33 score.
Done with 1.725v and just after the computer started up so with still a nice and cool compressor in the prommie, but with outside temps still around 20 degrees.
I'm slowly getting out of this thing what might be hidden.
Mem is at 440mhz 2.2.2.5 and all stuff in my sig is used.
this is mine...
not really, actually pretty bad for an fx-51..Quote:
Originally posted by MickeyMouse
TOMB> ownage there M8 :):):)
But my temps are bad, up to +5°C under full load.. default mach I is not strong enough :(
So it is only fully stable at 2750mhz :(
(tested many times with 100Million digits pifast41 ;))
But in games it kills the p4 ;)
In Gothic II on certain places i get with p4 @3900mhz under 20fps --> the fx-51 will give me 30fps ;)
Same in morrowind, p4 on some places 25fps, fx-51 wil give over 40fps ;)
So the Fx-51 is a real gaming cpu and wiill kill any p4 ;)
Just to illustrate a bit of good ol' socket A potency. It's a bit behind the FX's and others but what can ya do. :D
http://www.bigbutton.com.au/~lord/HP...871[1].jpg
Wow! amazing score, Lord! :toast:
512Kb L2 cache must be a Barton.... ;)Quote:
Originally posted by MickeyMouse
LORD veryveryvery nice :) barton or tbred my man??
It's a Barton, Jason. I'm still holding the torch for Socket A. :D
Also thanks for the encouragement guys. :)
I might be able to shave off a little more from the total time.
Wow! What specs are you using there?
What cooling?
This is the best score of a barton/xp by far I've ever seen!