Printable View
I'll tell you one thing, this board sucks donkey balls when paired with a Quadcore.
If I go a hair past 3ghz (9x333fsb), my computer will restart, be it 15 minutes after I turn it on, or 4 hours. I'm planning on getting a P5B Deluxe to try find out what this Q6600 can really do, and putting my E6400 back in the P5N-E.
I will wait for this motherboard. Thanks for review!
What are u expecting, NVidia 6X0 with a Q6X00...? :nono:Quote:
Originally Posted by [XC] DragonOrta
Grab an 965 board asap. P5B Del is great (i have it for many months on my main system), however the pci-e 1x prob has drove me nuts. If your planning on running @ 4/5 mem divider (which requires 1.65v especially above 400mhz fsb), don't get it...
Duh ... I have freaking problem with this board last night ..... here it is ....
I overclocked E6600 chip to 3.9GHz (with vcore=1.55v in BIOS) with watercooling system. Temperature in idle stage was 38*C - 39*C and upto 63*C when loaded.
E6600 (FSB=1734MHz , RAM=812MHz) - multiplier=9
vcore=1.55v
vdimm=2.1+v
NB volt=1.39+v
RAM - SuperTalent (4-3-3-8) set at 4-3-3-5
BIOS version= 0401
All of sudden, I got BSOD on this board (Page_fault_in_nonpage_area).
After rebooted, received error. When I went into BIOS to check, found out something weird in the POWER tab... :eek: :eek:
vcore ----> 4.08v
3.3v ----> 4.08v
5v ----> 6.88v
12v ----> 16.32v
"Holly Sh*t :eek: ..... what the F is going on" ....
My first thought was lower vcore (to 1.5375v) and used DMM to measure it ... DMM showed vcore = 1.514v. --> Measured vdimm, vchip ... all showed acceptable values ......Fine!
Rebooted again .... Problem still there ...
Reset everthing to STOCK setup .... Sheesss .... no luck
The above values are still showing the same. So, the problem could be the voltage reading sensor screw up somehow.
I bought this board back in Dec 2006. RMA still available?:mad: :mad:
Have any of you guys had problems going over 650mhz on memory? I'm also having problems getting high frequency with tight timings. This is the best I've been able to do so far. This is with 2.35v.
http://img208.imageshack.us/img208/1...estbootsx8.png
Nice clocks on the memory, what voltage are you pumping to the NB?
so the q6600 works with this board and 0401 bios? im not expecting an overclock of more than 3ghz anyway.Quote:
Originally Posted by [XC] DragonOrta
I'm pretty sure I was still running the 401 bios, so yes. 3ghz is childs play, even for this board.Quote:
Originally Posted by RAMMAN
I don't know what I'm doing wrong, but I can't get passed 2.5 ghz with mine. I have an E4300 and 2 gigs of Corsair XMS2. I read an article over at Legion Hardware with the E4400, all they did with this board was change the FSB to 1200. I've tried doing this and usually don't even boot into windows. 1100 is usually the fastest I can boot at with the 8x multi.
Any thoughts?
New 604 Beta bios is out. No changes log included.
Anyone tried it yet?
I've tried the 0604 beta bios, it sucked for me, locked multipliers for the E4300 again, didn't really notice any improvements overclocking wise, 3 useless bios updates from Asus (0505, 0602, 0604 all sucked), back to 0401...
i'm running the 0401 and i'm not getting past 2.5ghz. the guys over at legion hardware told me to go with 0407. what are settings are you running on your e4300?
My board has a problem with fsb between 1100-1300, but works fine above and below. I suggest you try setting fsb at 1400 and work your way up if it works. You might have to give some more volt to nb and cpu.Quote:
Originally Posted by N/A Matt
I'm running 0401 btw. But I don't think this is a bios issue.
Is it possible to use a TuniQ Tower 120 on this board with the original heatsink?
Yes I am using Tuniq Tower 120 on this boardQuote:
Originally Posted by Leonardo Aucar
You have any pics of your setup?Quote:
Originally Posted by lionheart
http://img501.imageshack.us/img501/3541/image113gs0.jpgQuote:
Originally Posted by james111
capture by spv C600 :( :( :(
Does the tuniq have to be mounted like that or can it fit the other way?
No mod mobo 507MHz Prime stable, must used vdimm 2.178V.
http://www.vmodtech.com/files/orthos-507-1-800_655.jpg
I'm sorry but Tuniq only fit with that way :( :( :( ..... Although I like set up perpendicularQuote:
Originally Posted by james111
Venom_Crushe: cool !!! .., but your bios very old :D
Only tried the new 0604 bios updated from 0505, and my 333strap coldboot problem seems to be gone. Previously i had to turn off and on the psu before booting the computer left off overnight, or it would crash in 3d. Also Vdroop is gone, completely and the pc is more stable overall. I set 1.45 in bios and i get 1.48v. Measured with a multimeter and also no droop in load.
with 0505 i had to set 1.55v to get 1.45v, both idle and load. I'm measuring from the spot showed in VR-Zone's article.
Tried SuperPi and it seems a bit slower tough.
Quote:
Originally Posted by Eversor
Has anyone else tried the 604 bios is vdroop really gone?
The board under volts quite a bit for both the NB and the VMEM:
Umodded:
NB
Bios = 1.39v, DM = 1.30v
Bios = 1.56v, DM = 1.45v
Bios = 1.7v, DM = 1.6v
VMEM
Bios = 2.178v, DM 2.0v~
Pencil Modded:
NB
Bios = 1.39v, DM 1.30v (no change from unmodded strangely)
Bios = 1.56v, DM 1.55v
Bios = 1.7v, DM 1.7v
VMEM
Bios = 2.178, DM = 2.2v
Be careful with the voltages if you are pencil modding the board, you should only need the NB volt mod, unless you want to bin your DDR2 modules ;)
When installing Vista what nforce drivers should I use the ones fromthe cd or the ones from nvidias website?
You should update the lates driver from Nvidia website