your sp2004 screen 10451 haurs > 435 day :stick:Quote:
Originally Posted by furyfax
Printable View
your sp2004 screen 10451 haurs > 435 day :stick:Quote:
Originally Posted by furyfax
Here she is...
What does the 3rd line mean, anyone who can tell my something out of those numbers?
@Mongoled
Whats your ambient temp and case temp dude?
Im running @2900 1.42volts
My CPU is 48*C loaded ...watercooled!!! My chipset 47*C
The problem is my room temp is 26*c and my closed case temp is 38*c.
I could get better benches by simply taking off the side case and opening the window but i just dont find it comfortable freezing my nuts off.
This is a great CPU considering my 'constraints' and even with those temps, my 2900 is rock solid :woot: ...ill post some screenies later :D
Any suggestions? :)
I posted this in the WR thread, and haven't got official word yet, so can't claim it yet :p: but it's higher than the current WR listed in the thread.
http://valid.x86-secret.com/show_oc?id=78027
Just finished building my PC :toast:
http://i9.photobucket.com/albums/a96...66/success.jpg
The reason why it doesn't understand my memory clock is because of the 11x multi. With the 10x multi it reads them correctly, but I haven't tried reaching that high on 10x and really not too concerned what the memory is running at as it's only a suicide attempt.
:woot:
WTH, 11x Multi!!:eek:Quote:
Originally Posted by Nephilim
...I'm stunned!
hehe and 10x multi ;) I have both! Gifts from the overclocking gods!Quote:
Originally Posted by Clint
I have no idea why :p: never had them before phase (trust me I checked :fact: )
Righty, ive just stuck my thermal diode into my case just for you :) and the temp is 33C, ambient temps outside the case is abt 26C . My nthbridge is at 42C and my PWM is at 51C (have 80mm fan over it), this is whilst priming. Please note tht im running naked and have lapped my core slightly. Wht does your WC loop consist of, doh, forget this questionm i just checked your sig :p: 2900 at 1.42 is great, is 1.42 a windows value or did you measure with DMM? Your case temps seem quite high compared to mine and i live in Cyprus! My low case temps are helped by my setup, i have my rad on top of my case and air is drawn from the button across the components and out the top.Quote:
Originally Posted by thebeast
Probably help if i told you wht i got (sorry for offtopic guys), my loop consists of
Swiftech Storm
Maze4 GPU
Thermochill 120.3
Eheim 1250
4x120mm fans at 5v
I think you got to find a way to improve the airflow in your case!
Nephilim,
Nice clock, im sure tht your overclock is helped with the higher multi you can run, wish i could do the same to mine
:D
ok after doing some LONG testing here is what I have come up with my 0550VPMW as far as overclocking goes...
Cpu Overclocking
Bios.......Speed
With IHS Still on.
1.350 2600Mhz
1.375 2680Mhz
1.400 2720Mhz
1.425 2750Mhz
1.450 2800Mhz
1.475 2820Mhz
1.500 2860Mhz
1.525 2860Mhz
1.550 2860Mhz
1.575 2880Mhz
1.600 2900Mhz
***These speeds are for Core 0 only....Core 1 is strong like bull!
Seems ok but I have seen alot better....does anybody know if I were to cut off my IHS...will the factory cpu bracket still allow me to make flush contact with core using storm waterblock?
this is what I am referring to:
http://www.badongo.com/pic.php?file=...12_bracket.jpg
Hmm, maybe I should throw mine in the freezer for a couple of days...:p:Quote:
Originally Posted by Nephilim
Quote:
Originally Posted by Grinch
0.150volts for the last 100MHz...not so good...what are your temps?
No problem using whatever cooling after removal of IHS, but caution is allways adviced..both when doing it and when mounting cooling.
Quote:
Originally Posted by Clint
There again that was with Core 0 only temps were at 42C @ 1.6V
I think most of the heat inside my case comes from the v. hot heat pipe solution (ASUS A8N32-SLI),ive got the special fan on the heatpipe 'rad'.
I might take that off and use a good northbridge cooler,is it worth putting one on the southbridge?
Im gonna take 1/2- 1mm off the waterblock i have-NexXxoS XP-and lap the core a little (now that i know its not too hard :)).
It's a 3 gigger for sure,but i have to control these temps. :D
Oh your chip is most definately a 3 giger :p: , I wish i had your chip or even better Clint's chip hehehee, maybe i should meet a Swedish girl this summer and get her to seduce Clint then steal his chip, hehehee.Quote:
Originally Posted by thebeast
Just an example to how important airflow is, ive upped my fans to abt 8 volts, and my case temps has dropped to 27C, just 1C above outside temps. You got to find a efficient way to get the hotair out your case. And yes, do get your CPU naked, your 48C will become at least 40C!
Hehe, nah...the Swedish girls are boring...better you send over Demetra Eleftheriou here to seduce me...that might just work!:DQuote:
Originally Posted by mongoled
Since I have same thing but batch 0168 (last 4 digits)
Everything else matches.
Batch 0168
Batch 0523 - so far :D
Quote:
Originally Posted by furyfax
ok guys...here are some pics of my current setup...still have to tidy things up a bit but wanted to show you all....decided to take lid off 0550VPMW see if that will help things...
http://s2.supload.com/thumbs/default/0550VPMW.jpg
http://s2.supload.com/thumbs/default/naked0550VPMW.jpg
http://s2.supload.com/thumbs/default/stockmount.jpg
http://s2.supload.com/thumbs/default/newmount.jpg
http://s2.supload.com/thumbs/default/pump_reservoir.jpg
Grinch...this is gonna be very interesting....I'm standing by for results:banana:
This is Core 0 only Core 1 is way stronger...
CPU Overclocking
w/out IHS
Bios..........Speed
1.350 2680Mhz
1.375 2740Mhz
1.400 2770Mhz
1.425 2820Mhz
1.450 2830Mhz
1.475 2870Mhz
1.500 2890Mhz
1.525 2910Mhz
1.550 2930Mhz
1.575 2940Mhz
1.600 2950Mhz
Gotten better w/out IHS still have a weaker Core 0....Core 1 is String as hell!
seems stable to me:
http://s2.supload.com/thumbs/default/stable.jpg
The pattern seems to be that core 0 is the weakest..not mine though :stick:
http://img111.imageshack.us/img111/9...screeny7ur.jpg
Well my luck is not so good..I just a nice new 170 0550 VPMW batch 574
I threw it in and set to 2700 with auto vcore and posted and booted into winxp slighlt slower than my other 170 0546 XPMW
SI 120/Nexus fan/AS5..smallest dab I ever used on center of cpu
idle temps were 4-6C hotter(31/33 vs 37C)
So i said what the heck..ram prime 95 and crashed faster than blink of an eye on core 0
needless to say I tried other vcores up to 1.4v bios setting and no go..so for grins tried 2800..again smoothly loads winxp, no crashes , hangs...but nothing with Prime 95 will run unless I give 1.375x110%...tried for a few minutes and stopped as temps rapidly moved to 55C
I am sad to say the least..I really hoped to get 2800 on low vcore....not going to happen from my experience with these opteron
this cheap acts very different if I oced too high on my 0546 170..ie 2800...it would crash winxp or lockup or really hesitate loading winxp welcome to desktop screen
I am running cpuburn program...on core 0 and temps went from idle 37/38 to 40/41
I realize I have not cured the AS5 at all....I may remove the HSF and try a thin layer all over
Prior to placing the new 170 in I reflashed my BIOS to 623-2 to make sure with all my screwing around everything was ok, ram is set to 133/100 divider and 3-3-3-10-1t
Just an example to how important airflow is, ive upped my fans to abt 8 volts, and my case temps has dropped to 27C, just 1C above outside temps. You got to find a efficient way to get the hotair out your case. And yes, do get your CPU naked, your 48C will become at least 40C!
I popped the lid about an hour after i got her :D
How much did you lap the core,just enough to have perfect flatness?
wow, i guess my other one that does 2.85 with 1.4v isn't that below average afterall. Should do over 2.95 easily with IHS removed.
Neal
I'll say it again, these chip are almost TOO temperature sensitive. If you get the temps down i'm sure it will go further. Might have to consider removing the IHS. A lot of guys are buying watercooling JUST for their VPMWs, like Grinch. And watercooling on a naked core is what makes these chips happy.
How does 1 guy here in the forum get 11x multiplier with a opteron 165?
I can only get multiplier 9 :shocked:
I also removed my IHS today and going to test tomorrow,it is much cooler now @ 2665mhz 1.42volts :toast:
for $hits and giggles decided to pop lid on 0546XPMW here I am at 1.475V(bios) idle in windows:
http://s2.supload.com/thumbs/default/smart.jpg
This is about 8-9F degrees lower than 0550VPMW at 1.45....
also will post load pics as well but this chip loads at 35C instead of 37-39C on 0550VPMW....wierd?
sorry to mention this is at 2800Mhz
just an observation about the 2 chips I am trying....the 0546XPMW seems to idle lower (26-27C) versus 0550VPMW (31-32C) the 0546XPMW seems to load just a little bit cooler (36-37) versus 0550VPMW (38-39)...what I am seeing is that there is a bigger jump from idle to load with XPMW chip than the VPMW....again this is just an observation.
Absolute0....I am pretty sure my chip just needs volts...at 2800 it would run Prime 95 on core 0 but needed to give it alot of vcore(1.5v+) this rapidly moved temps in the 50s....I did not let it go for an hour to see if it would crash
Looks like my luck continues to be crap...jeez feeling I am chasing a holy grail my 0546 xpmw looks like a better chip overall...kinda wish I had my 165 back
Holy crap..this chips is running at 2500 on stock vcore but load temps are nealry what my 0546 at 1.5v would reach
I am hitting 47C right now...with 1.5v my 0546 hit 48/49C...this chip is a real issue for me....I amy have to see it to someone who has better cooling....at low volts it boots in XP etc at 2800 but not prime95 stable I am sure in someone else hands it will be fine but no way I can use this chip in FL...
I took off the SI 120/nexus , reapplied AS5 by spreading a small dab in the center over the IHS..temps no different
only other thing to do is get different ram but that is probably a waste..this chip just runs too hot for my cooling
I can not afford the time or money on WC setup
Iam running 704-2bta bios now
reinforces my observationQuote:
Originally Posted by Grinch
Better overclockers tend to be the new CPUs that use coldbugged memory controllers, and they tend to run hotter.
I'm in florida....:woot:
I live in Tampa....
Ok..this totally sucks..I wait all that time for a VPMW
170 0550 VPMW 678L0574...pure crap..idle temps are 4-6C higher and loads rapidly go up
the chip will at stock run 2700 and run winxp fine...but prime dies so fast on core0,...in fact this chip will small bumps runs winxp fine at 2800...prime is another story..I did get prime 95 to run
this is absurd at stock vcore at 2500 the chip is hitting 48/50C...same setup that my 0546 xpmw did 1.5v at 48/49C!!!!!
Damn it
Sorry I needed to vent
Neal
BTW Absolute0...it is not crashing at 50C so it is not heat but voltage it needs and I think with better cooling this needs 1.5v or to run higher
Trust me, the less heat, the less volts you need.
On my 170 in the sig, going from air to water needed .08 less volts to run the same speeds. it makes THAT much of a difference.
Maybe so..but I do not have the desire to spend several hundred dollars to get better cooling....:mad:Quote:
Originally Posted by Absolute_0
Oh well...I will be looking to sell this chip unless a miracle happens...HA
Your selling a CCB1E 0550vpmw because of heat??
Hopefully this week, I'll get some fans for my rad and use some water. 2.8 @ stock would be nice.
That miracle is called a razorblade.Quote:
Originally Posted by nealh
The whole reason for the chip was to hopefully hit 2.8 at low vcore and temps becasue in FL(like many areas...it just becomes too hot)Quote:
Originally Posted by thunderstruck!
I do not want to spend $$$$ on WC, not to mention..I have never seen it done and figure I may fry something
As for removing the IHS...I would then need a way t ocool the cpu...do not think the SI 120 would make contact
Did'ya read yer pms recently :stick:
struck into my mind once:)...cause i can get my 165 doing the same thing with the same tempetature and hihger VcoreQuote:
Originally Posted by thunderstruck!
I wish I could get an 0550VPMW to test, see what kinda heat/issues I might get.
Quote:
Originally Posted by nealh
hey man i know what you mean about chip....I got angry as hell!....but watercooling is the way to go for that chip.....my 0546XPMW is way cooler...btw I live in lakeland...we are close to 1 another
mad mikee..I pmed you back
I tried 7042bta bios..just hates my mobo and ram..I guess...
back to 623-2 and will some more testing but the point of this chip was lower vcore and presumably lower temps...this is not going to happen in my machine..
So I will need to sell almost for sure
Lakeland..I have an offcie in Brandon and Lakeland....very small world out there....
the problem is I hoped ofr a quick easy OC like so many of these 170 0550 VPMW's but mine will not be that way
Also I noticed with the 623-2 bios and this chip..if I set start vid to 1.5v and leave other vcore setting..cant recall there names..vcore and special vid to auto..the chip get 1.38v in 1.36 in winxp and 1.38v in bios reading ...not sure what it is really set to..very weird
Where have the most recent 170 0550 VPMW's been coming from? OEM or Retail Box. Anybody know if they are still available? I'm missing 10x multi!!
Sent ya another, but for everyone, do you guys check vcore on the DFIs w/ a DMM to see what it actually is?
I was running 1.5 vcore in bios, went to check one day on my DMM and found 1.6 :eek: :shock2:
I tried to check vcore but the SI 120 makes it a bit of risk to get there easily
not happy to hear that your DMM read +0.1v..was 1.5v a bios setting or winxp or bios reading..I only report vcore I set in the bios(not xp or bios reading)
Mad Mikee..sent a f/u PM
What's an f/u pm? lol
Not happy to hear about the overvolting either, but i dont really care because everything we know is measured with the overvolting factorered in, by CPUZ reported voltages. So when people say they ran 1.65v 24/7 they were really running like 1.73 volts 24/7, so if i were really running like 1.57 instead of 1.48... doesn't really matter.
On my board at least, vcore is spot on when idle, and jumps .03v almost exactly (+/-1mv) on full load. Even with VID special, it sets to the exact value I get in calc.exe.. crazy
DFI Ultra-D AD0
here is 0546XPMW naked full load:
http://s2.supload.com/thumbs/default/0546xpmw.jpg
Quote:
Originally Posted by nealh
sweet...maybe hook up 1 day and put your chip under water? then we can see what she really can do? perhaps temps are high cuz of airflow in case?
ok so far as I can tell after priming and what not...my 0546XPMW AT 1.5v runs cooler than 0550VPMW at 1.425V under full load....go figure....:eek:
@ Grinch Where and when did u get your vpmw? Thanks
HOLY CRAP
I just popped the top, load temp is down a lot.
When the lid is on, heat gets trapped under the IHS. When i give it real volts, it would always start to get really hot. With a bare core, the heat transfer is totaly direct, as with my other naked chips, i can keep giving it volts and it hardly warms up.
Right now i'm dual priming at 3.1 Ghz with 1.48v :eek:
I'll keep you guys updated on the progress
http://img.photobucket.com/albums/v7...l/a9e94f33.jpg
Quote:
Originally Posted by nugzo
got it from ebay...pm'ed you
I told you so, you fool!:slap:Quote:
Originally Posted by Absolute_0
I know you gonna do a decent 3.2 prime before day has ended:toast:
Hehe, it will be one of the first Opteron to dual prime at 3.2 Ghz with normal watercooling and 40c load :P
For more than a few minutes i mean.
EDIT
Doesn't like 3.2 very much, it wants more volts and when i give it more it goes above 40c, hits 43c and causes core0 to fail. I'm sure it's bench stable past 3.2 though.
Right now i'm working on 3.15 with 1.5v
excuse me, something O.T. here.....
how to mod. the bridge fan of LP nf4 series?
any good link for reference?
thanks!:p:
I hear ya..:DQuote:
Originally Posted by Absolute_0
How did your core look like, in terms of concaveness?
All cores look pretty flat to me. Don't try to convince me to lap it, you evil, evil man. I was scared enough removing the IHS, took off a couple SMDs. There are a LOT more of them on the dual cores than on the last single core i beheaded. Good thing they don't have any importance :P
Pet@X got his 0550VPMW prime stable at 3.3Ghz on water, but I'm sure yours will be the second best. Much love for that CPU!:clap: Time to edit your sig!Quote:
Originally Posted by Absolute_0
hehehe...nah, I'm just trying to convince myself my core is in need of it...kinda scary procedure to lap the core...all those SMD's that seems to be falling off quite easy.Quote:
Originally Posted by Absolute_0
If lapping I need to use som hardcore velcro or something to prevent bits and pieces to get stucked under those small SMD thingies, and then when ripping that velcro off...:nono:
But I'm tempted...
Glad to hear those SMD's didn't mean a thing, I believe they are there for those high density multi CPU server setups that "might" have electro magnetic interference...and the technology has been applied to the whole production line.
But he was on waterchilling loading @ 25c lol. I idle at 30c and load at 41. Right now 3.15 Ghz 1.53v priming good...Quote:
Originally Posted by thunderstruck!
Hah!Quote:
Originally Posted by thunderstruck!
Just wait and see, I'm quite sure that will be beaten at a lower voltage..:slapass:
EDIT: oh, he's on chilled...well, thats a different story....
Just saw that you changed your sig. What load temps are you seeing at 1.19v? How about at 1.39?Quote:
Originally Posted by Clint
I'm getting 32/42C now with my XP-120 with a 1100rpm Nexus on it.Quote:
Originally Posted by thunderstruck!
This is in a ambient of 24C.
That 3.05GHz on 1.39Volts was in a ambient of 10C:
http://img397.imageshack.us/img397/8...e0587it.th.jpg
did someone set my words invisible??! :eek: :confused:Quote:
Originally Posted by kenofstephen
Honestly I can't help you, but if you posted in designated place you might get better response..Quote:
Originally Posted by kenofstephen
..here we are so full up in this dual thingie, we just can't get our minds to something else for the moment..(speaking of myself):rolleyes:
alrite......I asked becasue I think you guys must have well-modded that before doing such nice overclocking.......:DQuote:
Originally Posted by Clint
hope I could get the answer soon....;)
But if it's the chipsetfan you are talking about I'm working on a "ghetto like" mod
that includes the ZALMAN ZM NB47J, a vacuum cleaner noozle, a bit of a vacuum cleaner tube and the excess air that my Nexus fan moves outside the XP-120.
All in all only one fan on my board.:cool:
When I go water I have another thing planned..
I think Absolute is right. These VPMWs like low volts and temps..
I'm 24h dual prime stable at 2.8, 1.40. But I can prime at lower volts, and temps, but as soon as I get past 45C, the weaker core fails..still at 2.8G
Here is the weak core 0 priming by itself < 40C
http://img211.imageshack.us/img211/4...rime40c6qf.jpg
The second it gets past 45C when I begin priming the stronger core 1, core 0 fails..
http://img211.imageshack.us/img211/2...5cfails7ox.jpg
I can't wait for water to get running! 3G would be awsome if I could hold the temps..:rolleyes: For now, I'll settle for 2.8 @ 1.408v
Quote:
Originally Posted by Absolute_0
way to go man!
:woot: :toast:
Bingo thunderstruck, i've noticed it too, core0 seems more sensitive to temps, when i turn off core1 and core0 is going by itself at lower temps, it keeps going.
@ Grinch, that's nothing, i got a 3.15 Ghz stable show coming up, let it run a bit longer
thats why when i was posting speeds it was Core 0 only...weak ass core...LOL:clap:
...I just can't resist...Quote:
Originally Posted by Absolute_0
My Opty alternates failing cores..when I'm able to make them fail that is....:stick:
:D
..yeye, I know...bragging, bragging...:rolleyes:
Why haven't you done 3.15 Ghz yet?
I have actually...but with silly 10C ambient.Quote:
Originally Posted by Absolute_0
I just don't find that viable here.
I will rip your OC's to pieces though as soon as water is mounted...hehe.
..if I not mess things up before with my lapping ofcourse...:slapass:
Yeah yeah Clint, all talk :P
http://img.photobucket.com/albums/v7...l/903fc908.jpg
wow guys that is amazing, hopefully once I get H20 my VPMW will break 3Ghz too :p:
Can anyone point me to a thread or guide (with pics etc) on removing IHS?
also if anyone is interested the other VPMW I bought (still sealed retail) is on Ebay
-edit-
Also what do you think could be potentially more harmful to these dual cores, high volts or high temps? Do high volts matter if temps are kept low?
read some of this ceevee
http://www.xtremesystems.org/forums/...ad.php?t=59068
looks like this thread exploded when i was sleeping, its gone off the scale, heheee
:scope:
Clint and Absolute, i think you guys should be banned from posting here, you are making us all feel very inferior, i will sue, heheheee. Peeps it has been mentioned many times, but i will say the same thing, the key to overclocking the VPMW's is to keep them cool. A few degrees makes all the difference. Core0 primed for 16hrs by itself, but in tandem with core1 wont go to much past 3hrs. Temps were between 39-42C, i may have problems elsewhere, just trying to source a AD0 Ultra-D (cant wait any longer for the new DFI board). Hopefully it will be a better board then my current Ultra-D and get me 3Ghz prime95 stable for at least 8hrs.
Overclocking is going on the back burner for a while, till my new board comes...
:toast:Quote:
Originally Posted by Absolute_0
great stuff man...!
..I know, I better keep quiet...:p:
..I just know you gonna do 3.2GHz today...:D
I'm gonna get some sleep first for sure :yawn:
you guys just woke up, but i havent gone to sleep yet
last prime update, i'm going to bed, maybe 3.2 tomorrow
http://img.photobucket.com/albums/v7...e/25e26dfb.jpg
What bios do you guys recommend?
System:
OPty 170 0550VPMW
DFI Ultra-D
2x1GB OCZ plat 400MHz 2-3-2-5
-----------------------------------
Currently I have 623 bios installed. I really like this CPU, but the temps are killing my crappy WC. I have TT BW water cooling, and it just sucks.
I can enter windows at 3GHz, but core0 keeps crapping out. Core1 is extremly strong and keeps on going.
What do you guys recommend of these 2 options:
1. Undress my CPU and get her naked.
2.Buy better cooling.
If option 2, what kit should I buy ? And I have this chipsett cooler that needs to fit with the new kit.
Hope you guys can help me out.
Wondering why is it consistantly core0 that is failing on my own and you other peeps cpus? Anyone has any qualified guess on the reason?
What makes core0 weaker than core1?
Clearly because 0 < 1. :)Quote:
Originally Posted by -.-PhanTom-.-
maybey a nuub question,how much power will the opteron 165 @ 2665mhz will eat from my powersupply?
I have a OCZ powerstream 420watt psu.
Sapphire x800pro vivo @ xt platinum 550/1200mhz
2x raptor 36gb 10.000rpm raid 0 striping.
I think it is to low power :confused:
Look here
Thank you,i need a new powersupply :confused:Quote:
Originally Posted by furyfax
265 watt only cpu says that tool :slobber:
YES fighting the OS - try 2 instances w/o Affinity and you get much further, same load, but let the OS do it's thing :D
Quote:
Originally Posted by -.-PhanTom-.-
Can you post a photo of a naked dual core? I want to know too how far are those SMD.Quote:
Originally Posted by Absolute_0
Also I found a very good tool to remove the IHS are those "don't know the english name" tools that come with vitroceramics, the one used to clean the surface. I tried it with my "poor clocker" Venice 3200+ that "only" did 2550 :D You need to use a razor blade or a cutter after to end the job, but it helps to don't get too much inside when you need to do the hardest part.
I am interested. Check PM.ThanksQuote:
Originally Posted by ceevee
but can I still install my 7900GTX after the mod.??:confused:Quote:
Originally Posted by Clint
phantom what i have heard is the weak core is usualy the 1 farthest from the memory controller http://techreport.com/reviews/2005q2...re-diagram.gif :banana:
If you read back to a post i put,my core 1 is weaker than my core 0,go figure ...Quote:
Originally Posted by -.-PhanTom-.-
http://img111.imageshack.us/img111/9...screeny7ur.jpg
Well I ordered an Opteron 165 today and I am looking forward to overclocking it. I still need to choose my ram though. DDR400 or DDR500. I know I want 2gb but I am unsure of which one I should settle on. I dont really want to mess around too much with the volts but I guess I could if I have to. So yeah, if you guys can help me out that would be great.
Just so you know, I will be running it on an ASUS A8R-MVP board with a Zalman CNPS9500 heatsink.
Thanks!
You can move the card to the other slot, more than enough bandwith there for your 7900GTX.Quote:
Originally Posted by kenofstephen
lookin at the link i showed actualy cpu 1 would be the weaker 1 if the theory i mentioned is correct
^^wtf?:stick:
Looking at the link shows the core 0 still priming.:rolleyes:
http://s2.supload.com/thumbs/default/7hrsprime.jpg
http://s2.supload.com/thumbs/default/load0546xpmw.jpg
seems to be stable to me at 1.5V (bios)
all peeps with 170 0550VPMWs, provide your batch # if you do not mind, i am compiling results and making a chart, so far it just goes up and down a lot, i am curious if more points on it could reveal any patterns
Osa170daa6cd
Ccb1e 0550vpmw
1387678l50358
you only got that out of a VPMW???