Printable View
LDBFE 0610UPAW
2.65Ghz with just under 1.5v. Made it to 2.5 with stock volts but anything more than that kept failing unless I packed on the volts. Went up to 1.53v trying for 2.7Ghz but it was getting to be a little too much for my Al XP90. Idle at 33C and load at 48C now.
http://valid.x86-secret.com/show_oc?id=109422
LDBFE 0622EPMW
Voltage is 1.5v. It did dual 32m at 2.8 same voltage, it may do 2.7Ghz at ~1.475 24/7 full load, but didn't test that yet. Problably gonna have to bump the speed/volts down when the heat returns, at 27c ambient CoreTemp said 52/56c.
well I can tell you that LDBFE 0623 XPMW is junk. 2.5GHz is stable at 1.44v, but im priming 2.6GHz @ 1.5v :rolleyes:
I'm running a 0606 EPMW. After removing and replacing the IHS, I'm at 2.7GHz at 1.375v Prime stable for 7 hours so far. Core Temp is showing 50/51 on load. Hoping to get to 2.8 but my RAM isn't cooperating.
ram not co-operating??? dividers...
you're letting your ram affect your CPU OC, you're OCing wrong...
Whenever I don't run the RAM 1:1, my overclock goes unstable. Just got this board (CFX3200) so I haven't had a chance to really get into all the settings.Quote:
Originally Posted by Dave_Sz
Just recieved the exact same stepping from the "Egg".Quote:
Originally Posted by Espion
It might be a week or so before I can install'er but will keep you posted.
:toast:
Just recieved the exact same stepping from the "Egg".Quote:
Originally Posted by Espion
It might be a week or so before I can install'er but will keep you posted.
:toast:
I have an X2 3800+ running 2.8GHz @ 1.344v right now. I'll post a screeny after it primes for about an hour ;)
Nice!!!Quote:
Originally Posted by shoman24v
Give us your stepping please.
:toast:
LCBIE 0618 EPMW 2.8GHz @ 1.344v
Imagine if I gave it some voltage lol... This is on air.
http://img146.imageshack.us/img146/7...board01kz9.jpg
Nice shoman!Quote:
Originally Posted by shoman24v
Hopfully my 3800 will be close.
:stick:
ok, change the 4 major ram to the timings the ram is advertised for, all others change to AUTO. If that doesn't work, maybe a poor MEM controller?Quote:
Originally Posted by Dark79
I forgot shoman, you STOLE your chip!Quote:
Originally Posted by shoman24v
:toast:
Just kidding, seems to be getting better and better as you go, wish I could stumble upon such a chip.
:up:
LDBFE 0620VPMW
http://img223.imageshack.us/img223/9...3389ci8.th.jpg
2.78 Ghz
http://img136.imageshack.us/img136/8...20amcv3.th.jpg
Still pushing - 2.8 (280 x 10) is stable though too. Will update as I push up.
another LCBIE 0618EPMW
2800mhz@stock
http://img169.imageshack.us/img169/8...3hrswt6.th.jpg
more tinkering...
SP32M@ 3000mhz:
http://img20.imageshack.us/img20/895...p32mxy9.th.jpg
http://valid.x86-secret.com/show_oc?id=110261
SP1M@3100mhz:
http://img191.imageshack.us/img191/5...sp1mcp7.th.jpg
http://valid.x86-secret.com/show_oc?id=110263
God damn those are some nice chips...
I'm guessing that all of these x2 3800+ are of the S939 bunch?
I'm a bit disappointed in my 0607UPMW "N", I need phase. 2.6ghz max @ 45c 1.425 Anyway with the AMD price cuts and they seem to be putting Toledo cores in allot of 0618’s. I could pick up three of em and sells the rest that don't OC. I say a new 2006 x2 3800 TOLEDO thread is needed. They seem to be a whole nother beast.
haha just received another LDBHE 0601 TPMW from newegg today, this time i won't take off the IHS and risk having another dead LDBHE 0601
you had a TPEW IIRC ?Quote:
Originally Posted by Drozdov
yeah TPEW the first timeQuote:
Originally Posted by Supertim0r
Which are the codes in the steppings for the Toledo chips? I thought all x2 3800+ chips were manchesters. And where is everyone getting these toledo cores?Quote:
Originally Posted by hawkeyefan
Quote:
Originally Posted by hawkeyefan
How far is this chip actually prime stable though?
Any know what Newegg is shipping out? Have one coming tomorrow - already have a 620VPMW from Directron that is prime stable up to about 2.79 Ghz (1.47v) - the best OC'r will stay in mine, other into the wifes box.