Still waiting for someone else to join me in the 8k club with the GTO2... :cool:
Printable View
Still waiting for someone else to join me in the 8k club with the GTO2... :cool:
Nice score :toast:Quote:
Originally Posted by MaxxxRacer
Did you tweak the ram timing? You shall get better result. ;)
Too much overclocking to the VPU will crash in CPU test too. :)
PS: Just press "ESC" after the first 3 tests completed if you just want the total score.
ya.. ive noticed that it locks up when i push the gpu too far... I did the voltmod and it got me some more mhz but im still trying to figure out where it is stable.. i believe around 640mhz at the current volts..
Sadly the mounting plate on the maze4 covers up the voltage check point on the X800 so i need to make a new voltage checkpoint (solder wire to the checkpoint and route wire to molex connector.
No i didnt tweak the ram.. the ram seems to be a bit weak. The ram is only totaly artifact free in all games and progs at 570.. but it will 3dmark just fine without artifacts at 600.
i tried to press esc like i usualy do after the 3rd test but it was a no go..
anyway, hopefully I will be posting a 8000 score tonight after i pus the vcore to 1.6v
dude u cant shrink the picture that much.. NONE of the text is readable.. lol..
try again..
http://www.xtremesystems.org/forums/...id=39967&stc=1
now i got an nice new pretty score.. 2.92ghz 292x10 1:1 2.5-3-3-6 and 648/600 on the card
http://www.xtremesystems.org/forums/...id=39968&stc=1
i haven't read the thread but... is there a place to actually buy these cards for $200?
Quote:
Originally Posted by b0bd0le
kohan69 looks at his own signature... :rolleyes:
I tweaked the ram timings and it did the same highest ram clock as untweaked, the artifacts I got is almost the same :D , but the marks boost up from 76xx to 78xx.Quote:
Originally Posted by MaxxxRacer
http://img7.imagevenue.com/loc158/th_1a0_7833_small.JPG
interesting tin tin.. I tried 600mhz with the tweaked ram timmings and it instantly restarted the computer... For now I will work on getting the core higher and worry about the mem later. I think with 1.6v I can get 670 core.
maxxx, tin has 1.6ns, he has a gto2
:slap:
I got a watercooled x800gto2 @582/636 tweaked memtimings and with my cpu @2400mhz (SD3700+) I got 7334 3dmarks 05 :)
This is without any vmods so more to come ;)
http://service.futuremark.com/compare?3dm05=1441085
well I feel good. My score beats beats most of the more expensive GTO2 cards... though I would still like 1.6ns memory.
My GTO2 doesn't clock too well on the core...only up to 540 w/o artifacts. Some of the scores on here are insane!
3DMark03: 14,684
http://img323.imageshack.us/img323/5...46845yg.th.jpg
3DMark05: 7,036
http://img323.imageshack.us/img323/4...70362rm.th.jpg
I need some advice guys: Zalman VF700-Cu or Ati Silencer?
My X800GTO2 won't clock further than 520core/615mem with stock cooling.
I need to know what cooler to buy.
Thanks.
well as of now I got my core to max out at 665 with watercooling and 1.6V.
something to note. from windows to full max load the vgpu drops around 0.005 volts. from no output (changing resolutions) to max load the vgpu changes 0.01 volts. I know this isnt really useful info, but for anyone who gives a hoot, here it is.
also i noticed that I am getting load temps of a shockingly high 48C!!! on my old X800Xt at 1.7volts and 655 core it would never go above 38 under max load.. very very wierd. i dont think this core is running that much hotter, but its possible. my old one was R420 (agp) and this one is R423 (pcie).. changing to PCIE must have really done something to the core. OR the temp sensor is just off its meds.
I agree, you have a great score for such low clocks. (No offence)Quote:
Originally Posted by MaxxxRacer
My clocks is in my signature, and as you can see i only
score about 7600 points in 3D2005.
My card is fully V-modded.
What drivers do you use?
Any other tweaks?
_____________________________
146 CABYE 0540 FPMW 3100MHz, X800GTO2 16-pipes 650/650, DFI Ultra-D 2*Geil TCCD 512MB @620 , Custom watercooling, OCZ powerstream 520W
3D2001: 32500 3D2003: 15400 3D2005: 7600
no tweaks at all.
5.11 drivers. WHLQ but not FM approved yet.. should be a little while before they are approved.
im shocked I have a better score than you do considering ur at higher clocks. I am going to shoot for 8000 points now as I can run at 665/600 with the mem timmings tweaked.
I am also going to vmod the memory to see if I cannt get some more mhz out of it.
Anyone tried to unlock a powercolor gto?
like this one on the link:
http://www.powercolor.com/global/mai...tail.asp?id=79
looks freaking simmiliar to connect 3d
shame the powercolor doesnt have an external power connector.
if u havnt already boughten the card, just go with the C3D card... its an amazing card.
I have one question for those Zalman VF700 user, can I plug the power molex from the cooler fan to the header on my GTO2 instead of plugging to external power molex?
I just got my c3d x800gto@x800xt with vmods and i can't love this card enough!!!.I got ~6k from mark05 without any overclocking (500/500) and i just tested with 1,45Vgpu (630/630) and i got ~7,3k from it!!!.How high i can go with this??.1,6V 24/7 and 1,7V in tests??.How about vmem,is 120mm blowing beside it helping so i can raise the vmem from 2,10V =>?. I saved 40€ by selling my x850xt and buying this treasure and gained close to 1k more points.....jeah!!!I LOVE ATI
cooling ?Quote:
Originally Posted by daysleeper
With excellent aircooling I think 1.6-1.64v VGPU loaded is perfect. VDD/VDDQ @ 2.35/2.30v with ramsinks + fan
don't forget to cool the power reg.
Aaaah cooling of course,I have watercooling,blocks for cpu and gpu.... :slap:
ps.Where the power reg is,i don't want to blow this card...
http://www.xtremesystems.org/forums/...21#post1133121Quote:
Originally Posted by daysleeper