Printable View
okay I managed to get 270mhz 2-2-2-5 stable 3.6v but I can't get 275mhz for the life of me....any tips?
Something interesting....with my old style bh-5, they lovd anything up to 3.6v. However, anything over that they would error out. I figured I had bad sticks.
Now, on my new redline, no surprise they LOVE voltage up to 3.6, but the instant I enable +.03v or go to 3.7 bam errors galore.
WTF is going on?
computerpro3: maybe other bios ? , burning needed ?
Bad VTT is my guess...not much you can do about that, it's luck of the draw I guess.Quote:
Originally Posted by computerpro3
I know that problem... up to 3.5V is okay, everything higher than that ain't stable and errors out. Seems to the mem controller, maybe?!Quote:
Originally Posted by computerpro3
I dunno. Maybe the RAM as well... :shrug:
not the cpu, happened with 3500claw and 3700 sandy.
How would I measure and correct bad vtt? I can solder...
Read through here for VTT info...
Anyone tried the 4000's on the DFI NF3 UT 250gb w/ a vdimm-modded Bios? Also, how much voltage are they typically requiring to run at 250?
3.3v might get you to 250mHz... how much can you deliver, 3.2v??
C
If I can figure out how to adjust my 3.3v rail, up to 4.0v.Quote:
Originally Posted by charlie
Hi everybody :toast:
I am gonna buy these mushkins at the end of the week (i hope)... i have just a few questions:
-Noone guarantee me that they are gonna reach 270 at 3.4V/3.5V no?? but i have a high chance to be able to do that no?
-Every pack should do 250 cas2-2-2-5 at 3.3V no? if it doesnt i can RMA them or give them back to the store, am i right?
And the last thing, with a pack of OCZ EL PLAT rev2 v1.0 (TCCD) I reached 270x10 cas2.5-3-4-7 with 1.48V. I have a bit of fear to not be able to run the UTT-BH (or are they UTT-CH? ) higher than 250 (thats the higher fsb i could reached with my Mushkin UTT, also they reached that at 3.6V, too much i know). The thing is i doubt about my memo controller, i know is very good for TCCD (310 be able to reached) but i have no idea how it will do with UTT...
Thats all, thanks everybody and sorry for my bad english (from spain what do you spect :p: )
See you
270mhz is only Pifast stable with my sticks...Quote:
Originally Posted by HitMaker
so you could say they´ll reach 270mhz, but propably not stable.
most sticks will do 250mhz at 3,3V.Quote:
-Every pack should do 250 cas2-2-2-5 at 3.3V no? if it doesnt i can RMA them or give them back to the store, am i right?
if you can reach 270mhz with tccd than you´ll probably be able to clock higher than 250mhz with the redlines.Quote:
And the last thing, with a pack of OCZ EL PLAT rev2 v1.0 (TCCD) I reached 270x10 cas2.5-3-4-7 with 1.48V. I have a bit of fear to not be able to run the UTT-BH (or are they UTT-CH? ) higher than 250 (thats the higher fsb i could reached with my Mushkin UTT, also they reached that at 3.6V, too much i know). The thing is i doubt about my memo controller, i know is very good for TCCD (310 be able to reached) but i have no idea how it will do with UTT...
its utt-ch5 by the way..
ok thanks for the anwers ;)
What do you recommend me?? Redline pc4000 or Gskill BHpc3200 (225€ vs 195€)?
GeIL ONE BHQuote:
Originally Posted by HitMaker
- Certified PC4000 2-2-2-5
- Guaranteed till 3,8V
The problem with them, when are they gonna be out?? i mean, here in Spain i cannot find them yet.. by the way they look like the Redline no?? pc4000 2-2-2-5 (at what vdimm?). I saw the thread about them, they look awesome by the way... but what about de price?Quote:
Originally Posted by Punisher!
IMO, the best UTT based RAM rightnow is the RedlineXP4K. I wonder if the GEIL ONE-S is gonna be better.
Mushkin redline:
274 MHz
HMMM 1.5-3-2-5Quote:
Originally Posted by zaba1978
i may have to try that. thanks!
oh nice results too. what voltage via DMM?
Voltage 3,7V :mad:Quote:
Originally Posted by stealth17
via DMM or set in bios?Quote:
Originally Posted by zaba1978
So exactly set in bios.My setup 24/7:Quote:
Originally Posted by stealth17
http://img147.imageshack.us/img147/302/77kv.jpg
fdi bios overvolts vdimm .1v too. so if its set in bios at 3.7v, your actually giving them 3.8v :(Quote:
Originally Posted by zaba1978
Can someone post the complete set of timings for this babes plz? I am asking this because I had OCZ VX and my Winnie 3200+ did 2500 in dual channel and with this babes it passes memtest without errors in 2600 fsb but to run windows I can't pass 2300!!! OMG!
Even if I lower the multi to 7, this babes wont run in windows is htt is higher then 230.
By the away, this happanes in my DFI ultra-D using the 4v rail! Bios version is 623-2 (most stable as I was told).
read through the thread. there are tons a timings people posted...Quote:
Originally Posted by MonkSP
just look up a couple posts at post 745 and theres a whole list of timings already
I used all the settings posted there but this is still bugging me
It runs perfectly on memtest but when I tried to load up windows it just rebbots. With every setting that is posted there!
Again, it runs memtest perfectly at 250 htt ovber and over, but when I turn memtest off and try to load up windows I get rebboted over and over.
My new Redline XP4000
<a href="http://img376.imageshack.us/my.php?image=2729oz.jpg" target="_blank"><img src="http://img376.imageshack.us/img376/1144/2729oz.th.jpg" border="0" alt="Free Image Hosting at www.ImageShack.us" /></a>