Ada3500dep4as Caa2c 0505fpmw - Huh?

Printable View

Show 100 post(s) from this thread on one page

04-11-2005, 02:04 PM
sauria

I got it about 4 weeks ago now
04-11-2005, 02:08 PM
Magnj

got mine about 3 weeks ago at http://valid.x86-secret.com/show_oc?id=11598 now. Hoping to get higher but im a newb :)
04-11-2005, 04:24 PM
Pedro Rocha

Here is the result of my 3500+CAA2C 0504GPMW in a common Prometeia Mach2 (mod by Ricky..of course :p: ) :

I used this CPU as backup, when my FX-55 is at Ricky's cascade for benching ..so not bad OC for a backup CPU ;)

Fuly benchable and 100% stable :)
http://pedrorocha.planetaclix.pt/A643500_3200.jpg

For the screen - cpu core at 1.9v
http://pedrorocha.planetaclix.pt/A643500_3438.jpg

In terms of ratio price / performance its one of the best CPU I ever own - cost me less than 240€ :cool:

Please remember that in the Mach2 at 1.9v the CPU is at -15ºC idlle and goes uo 8ºC postive temp in full load - measured with Speedfan

At 1.9v produced almost the same heat of the FX-55 with same vcore (altought a bit less)..

This CPU in the Ricky's cascade (where I'm almost sure this CPU temp will newer went down of -90ºC even at full load at 1.9v) will get some interessing results :D

In our next benching session I will take it along with my FX-55 and let you know the results :D
04-11-2005, 04:41 PM
eva2000

Pedro how well did you 3500+ do on air/water before mach2 ?
04-11-2005, 04:55 PM
kryptobs2000

yeah that is nice. I was hoping I'd get 3200mhz 24/7 stable, if mines anything like urs I should beable to. Shame I've had it for probably a month and have only had a chance to run it for maybe an hour lol.
04-12-2005, 07:48 AM
bravoman10001

I got a 3500+ (not for me unfortunately :( ) with the following code on it.
ADA3500DEP4AS
CAA2C 0504GPMW
1204404B50126.
I saw on other sites that this could be an clawhammer.
is it?? and is it better than a winchester core (which i ordered).
I'm not able to put test it because i dont have all the parts for the comp.
does anyone know if this is a whinchester or a clawhammer?
04-12-2005, 07:52 AM
cadaveca

the last two letters of DEP4AS, the "AS", say clawhammer. the stepping information in cpu-z et. al. confirms this as well(SH7-CG). It's a clawhammer with half the cache either disabled, or not functional. CPU-Z says newcastle becasue of the L2 cache.
04-12-2005, 08:06 AM
bravoman10001

Quote:

Originally Posted by cadaveca

the last two letters of DEP4AS, the "AS", say clawhammer. the stepping information in cpu-z et. al. confirms this as well(SH7-CG). It's a clawhammer with half the cache either disabled, or not functional. CPU-Z says newcastle becasue of the L2 cache.

thanx for the info.
do you know if it just better, worse or just as good is as a whinchester core?
04-12-2005, 08:13 AM
cadaveca

Well, thge FX-55 is a clawhammer, and not a winchester, so i would assume better. higher FSB and meme control with the Clawhammer...seems to handle voltage a bit better as well, although reading through this thread would give you more info than i can provide. My clawhammer is better than my newcastle and palermo Sempron, but of course each chip is going to perform a bit different at extremes.
04-12-2005, 09:23 AM
motoolfan

I'm completely happy with mine, won't be moving to venice anytime soon.

http://img91.echo.cx/img91/1039/28edit9na.th.jpg
04-12-2005, 09:40 AM
S0nic

bravoman10001: the clawhammer should be better than the winchester since it's based on the same core as the FX55, and as u can see in this thread many people were able to get crazy overclocks with it..
04-12-2005, 10:37 AM
[_Silence_]

Quote:

Originally Posted by Pedro Rocha

Here is the result of my 3500+CAA2C 0504GPMW in a common Prometeia Mach2 (mod by Ricky..of course :p: ) :

I used this CPU as backup, when my FX-55 is at Ricky's cascade for benching ..so not bad OC for a backup CPU ;)

Fuly benchable and 100% stable :)
http://pedrorocha.planetaclix.pt/A643500_3200.jpg

For the screen - cpu core at 1.9v
http://pedrorocha.planetaclix.pt/A643500_3438.jpg

In terms of ratio price / performance its one of the best CPU I ever own - cost me less than 240€ :cool:

Please remember that in the Mach2 at 1.9v the CPU is at -15ºC idlle and goes uo 8ºC postive temp in full load - measured with Speedfan

At 1.9v produced almost the same heat of the FX-55 with same vcore (altought a bit less)..

This CPU in the Ricky's cascade (where I'm almost sure this CPU temp will newer went down of -90ºC even at full load at 1.9v) will get some interessing results :D

In our next benching session I will take it along with my FX-55 and let you know the results :D

Finnaly someone passed my 3405Mhzs SS :D Well here's a new one: http://valid.x86-secret.com/show_oc?id=11789 =)
With the current ambient temperatura cant get more (22ºc +-) All this on a modded r404a Mach I.
04-12-2005, 10:41 AM
TheMeatFrog

Quote:

Originally Posted by [_Silence_]

Finnaly someone passed my 3405Mhzs SS :D Well here's a new one: http://valid.x86-secret.com/show_oc?id=11789 =)
With the current ambient temperatura cant get more (22ºc +-) All this on a modded r404a Mach I.

That's out of control my friend! :slapass: :woot:
04-12-2005, 11:01 AM
Magnj

Ok with my stepping...In sig. Im stuck at around 2500MHZ with boxed cooler. Is this normal or should I be getting more?
Also Should I grab a XP90C in a few weeks and a few new fans, Or Spring for water ooling in like 2 months?
04-12-2005, 12:35 PM
boostdfd3s

CAA2C 0505DPMW running under stock HSF and AS5
sitting pretty at 2640mhz (240x11) with 1.52vcore (closest i can come to stock on the DFI NF4 and Fortron 500w blue storm)
Prime small FFT stable for 14hrs
idle temp: 43C
Prime temp: 60-63C

:banana: pretty freakin happy with this chip on the stock cooler for $260. Gotta figure out some problem with my mushkin BH-5 and prime (wont run blend at all :stick: ) and get a xp120/xp90c before she gets pushed any further!
04-12-2005, 12:50 PM
S0nic

Magnj: unless u get a good water cooling system the performance u get will be the same as the XP-120, but the water cooling will be quieter..
04-12-2005, 01:02 PM
winston64

Hey, with this clawhammer i'm guessing theres no problem running 4 mem sticks on dual 1t. Would it be better running 4x 256, or 2x 512?
04-12-2005, 04:07 PM
Magnj

Sonic- I'll be going off to college in the fall, and i think the dorm rooms will get quite hot. I think I might go with water just to give me a bit of an edge on that heat, and let the case fans move heat produced from the ram and my VGA. Plus it will lok sweet :)
04-13-2005, 05:05 AM
kryptobs2000

Quote:

Originally Posted by winston64

Hey, with this clawhammer i'm guessing theres no problem running 4 mem sticks on dual 1t. Would it be better running 4x 256, or 2x 512?

Not sure about that, 2x512 will definatly overclock better
04-13-2005, 10:30 AM
S0nic

Quote:

Originally Posted by Magnj

Sonic- I'll be going off to college in the fall, and i think the dorm rooms will get quite hot. I think I might go with water just to give me a bit of an edge on that heat, and let the case fans move heat produced from the ram and my VGA. Plus it will lok sweet :)

good idea :), I plan on moving on to watercooling too as soon a I can afford it..
04-13-2005, 12:07 PM
sl4ck

were da hell did you those CPU-Z 1.28.2, with ClawHammer Code Name on 3500+ CAA2C, i can´t find it on CPU-Z web page :confused:
04-13-2005, 12:24 PM
kryptobs2000

What?
04-13-2005, 12:25 PM
Pjotr

Quote:

Originally Posted by snowice

has anyone ordered from futurepowerpc?

since i'm in ca, zzf and newegg are not my options becasue of the 8.75% nazi tax :mad:

Hey! Here in Sweden it's a 25 % VAT on anything from anywhere. Period. :yawn2:
04-13-2005, 12:27 PM
cadaveca

Quote:

Originally Posted by sl4ck

were da hell did you those CPU-Z 1.28.2, with ClawHammer Code Name on 3500+ CAA2C, i can´t find it on CPU-Z web page :confused:

PLease find it here:

click!

the version that you download on the cpu-z site is 1.28.3
04-13-2005, 01:31 PM
[XC] serlv

Has anybody purchased an ADA3500ASBOX from newegg in the last few days? Today is Wednesday 4/13... :)

What stepping/week are they shipping?

Thanks,
Scott

Show 100 post(s) from this thread on one page