deepsilver what do you use to measure the gpu temp?
Printable View
deepsilver what do you use to measure the gpu temp?
What kind of improvement did you get from your gemini against your tuniq tower ?Quote:
Originally Posted by Supertim0r
everest ultimate 2k7, that's the "multi-tool" for me. :)Quote:
Originally Posted by L'enFer
deepsilver, is its information true enough? did you try smthg else?
Thats a really clean case...What do you have in it?Quote:
Originally Posted by Tommy_Hewitt
What do you mean with "What do you have in it"? Do you want to know which hardware I have in it or what?
ses his sig :banana::banana::banana::banana:
its really close to tuniq (sometime a degree or two better.Quote:
Originally Posted by tomati
with high cfm fan, it wins
improvement : airflow on the chipset, vrm, memory and you can choose the 120mm you want (25, 38mm...)
Looking at its design I would recommend some good 38mm thick fans on it, denkis or panas @ 7v (nice, high pressure fans).
Ahh gotcha, I didnt notice that last night when I posted.... Didnt look like you had too much in that case :toast:Quote:
Originally Posted by Tommy_Hewitt
Quote:
Originally Posted by Supertim0r
thanks,
so for a silent setup the gemini will do the job ?
that temperatures are very true, that's why i don't need something other tools. ;)Quote:
Originally Posted by L'enFer
hr-05 sli with screwing assembly: :)
http://img254.imageshack.us/img254/8274/img4158as9.jpg
there are small problems with the xtx, but with the 7800 gtx (that is otherwise in) it would fold, i hope.
http://img511.imageshack.us/img511/4462/img4168xm2.jpg
http://img511.imageshack.us/img511/3766/img4170hz0.jpg
http://img352.imageshack.us/img352/199/img4171qi4.jpg
http://img128.imageshack.us/img128/5497/img4174vi8.jpg
is the rear washer hitting the card?
also, whats wrong with using the plastic push pins?
deepsilver
wow
that`s not good thing if you ask me. I suggest you to get a shorter screws
I don't think that screw should be touching the card....
Side note, how well does that accelero X2 cool? What load temps do you get, what case do you have it in, and how noisy is it? My X1900XT went bad and when I sent it back the sent me a X1950XT instead with a preinstalled accelero X2 so I'm curious how well it performs.
Still building but it will go in this case when done.
is that Ultra-120 fan blowing towards the rear exhaust?
I can see space issues, but is there a large difference between blowing into the heatsink compared to sucking through it
Yes it is blowing towards the exhaust. No there is not much difference between pushing and pulling. There will also be a 120 mounted in the 5.25 drive bays feeding air to both the ram and CPU coolers.
Yes, it will. Running the sys in my sig @ a humming.Quote:
Originally Posted by tomati
GeminII with 2x 120x120x38, mounted with anti vibe rubber fittings and running @ 6V:
http://img140.imageshack.us/img140/3494/dsc00040uv4.jpg
Quote:
Originally Posted by L'enFer
everest reports the same thing as most other sensor enabled programs. in extreme cases, odd values are reported, but those will almost be fixed within one days time if the problem is posted on the lavalys forums.
My silent System in a Lian Li PC7 :)
http://www.abload.de/img/pc67zs.jpg