Which part of the card would you like. I suppose it's this one.
Under the fan, there is nothing but the ram chips and gpu.
http://img360.imageshack.us/img360/8...0802rb7.th.jpg
Printable View
Which part of the card would you like. I suppose it's this one.
Under the fan, there is nothing but the ram chips and gpu.
http://img360.imageshack.us/img360/8...0802rb7.th.jpg
I think it's better to write down some components numbers cause zooming in on your pictures looks like a cell-phone pic.
Try to focus/adjust towards some components like IC's and all.
can you tel me what is marked on the ic next to the buzzer ?
Quote:
Originally Posted by lism
that's a good idea wright down all the ic's on the card and post a pic of the hole card and put the names of the ic's next to them
try this site :) http://www.imageshack.us/
pics are about 5mb, imageshack allows only 1.5/3mb...not enough!
I think it's fixed.
try just sharpening and lowering size in Photoshop;) i also badly need this vmod((
Back to #729 to get good pics
yup, sorry m8, already checked it out!) now just wanna get some info about this type of pcb layout and possibility of v\m... i found no info.
Help, this is really important for two persons -at least-...
Horrified by my pics?:shocked:
useless((((((((((((((((((((((((((((((((((((((((((
i can't Find anything for these Chips so i can't say anything try to help us a bit wight down all the chips on the card an post them..
I will do that ;)
Is there any VGPU Pencil Mod for Powercolor HD3870 PCS with PCB V1.0?
EDIT:
I´ve found a pencil VGPU-Mod.
But what about one for Mem and how to find the voltage-reading points?
EDIT2:
Im also wondering about such a mod for a HIS3870 Iceq3 card. A guy in a German forum mentioned about it.
Here is a picture:
http://foto.arcor-online.net/palb/al...3663363763.jpg
As you can see it´s got a completly different layout.
And btw you have to turn the picture 180°.
seems like noone can make asus 3870 mod( is it really so?
No one that can measure their VCore and see with voltages they get at 50k ohm?
Don't be afraid, and be patient.Quote:
Originally Posted by -DC-
I'm gonna shoot my card and i guess Vatos_locos will find that damned mod! By the way, if noting is found, i will found i myself (even if it means killing a card) !
:mad:
50k where ? we need a good photo of the card and the ic's and their datasheets to figure something out :) measures are good for info but we still need the photo of the card...Quote:
Originally Posted by todda7
Ref. design, Club3D 3870.. I was just wondering which vCore you got with the standard vCore mod where you need 100k pot @ 50k? I only have a 50k pot atm..Quote:
Originally Posted by Vatos_locos
oh in the ref. design with a 50k pot you get ~ 1.4 - 1.45 it depends not so good if the card is on air cooling...
Thank you! I have a pretty good watercooling setup so it will be OK:)Quote:
Originally Posted by Vatos_locos
I think 1.45v will boat my float, if u now what i mean:rolleyes:
sorry but i don't understand my english are not even close to good :p
Damn. This evning I did a horrible misstake. I changed the pot to my hardmod with a faulty pot. I heard a biiip from something in my case and now I have f**ed up my brand new 3870. I probobly ran way to much voltige throug my card. :(
I have no idea what I broke but now I got huge artifacts and I can only run windows in safe mode. :shrug:
Anyone have any ides. Is it possible to repair, does anyone made the same misstake? Are there any tools for finding what broke?
Would really appriciate any tips / info.
This is how my screen look right now: